Autosampler Vials Manufacturer

The staff in the picture is plastic-sealing the packaged 9mm hplc vials. Generally speaking, 9mm hplc vials is 100 pcs/pack. Aijiren will first put the finished 9mm hplc vials in the box, and then plastic-encapsulate it to prevent dust and moisture. This will ensure that Vial is clean and tidy. Aijiren, as a manufacturing company, is inspiring to allow customers to use the preferential and practical 9mm hplc vials.

Aijiren syringe filter features: The syringe filter housing is made of high-quality sanitary polypropylene material (PP). The precise structure ensures smooth filtration, reasonable internal space, and extremely low residual rate. Can withstand pressure up to 7bar. The needle filter has a thread on the edge and has a non-slip function, which is very popular among users. Our membrane comes from a well-known filtration membrane company in China, which guarantees the stable quality and high precision of the membrane pores, and provides maximum protection for your instrument and gas chromatography column. The quality of the filter membrane is stable, and there is no difference between each product, ensuring the consistency of your test results.

The COD Test Tube produced by Aijiren is often used in chemical oxygen demand testers. Since the chemical oxygen demand test is a test that requires strong corrosive reagents, Aijiren uses the most inert and stable glass to produce the COD Test Tube, which is produced by Aijiren. COD Test Tube meets customer requirements for oxygen demand testing.

Aijiren’s 4ml threaded sample bottle (13-425) should be matched with 13mm Screw Closures, suitable for Aijiren, Waters, Varian, Shimadzu, PE, Diane and other types of chromatographic autosamplers. The 13mm Screw Closures produced by Aijiren have accurate thread sizes, and the width of the center hole ensures accurate collection by the autosampler. The 4ml transparent screw cap sample bottle (13-425) equipped with 13mm Screw Closures can also be used as a sample bottle and storage bottle.

The showcase in the picture is the product showcase designed by Aijiren to participate in the exhibition in 2020, with Aijiren’s popular products, 2ml Autosampler Vial, Sample Storage Vial, Headspace Vial including Closures, Aijiren has 20 years of experience in the production of chromatography consumables, Aijiren The brand’s influence has begun to go out of China and into the world. I hope that more customers will recognize Aijiren and choose Aijiren.

COD Test Tube is one of Aijiren’s main products. It can complete many important experiments, such as digestion colorimetry, water quality test, oxygen demand test, etc. The COD Test Tube produced by Aijiren has high inertness, good quality and stable tube. Aijiren has become a well-known manufacturer of chromatography consumables in southern China by virtue of the good quality of COD Test Tube.

As a factory specializing in the production of chromatographic consumables, Aijiren has hundreds of workers for production, especially Septa. Aijiren has exclusive septa composite technology, so the requirements for the workers in the septa workshop are very high. The workers in the picture are using cutting machines for Silicone and PTFE composite material for cutting work.

Aijiren is a chromatographic consumable production factory specializing in the production of sample storage vial. Aijiren has 20 years of experience in producing chromatographic consumables. Aijiren’s sample storage vial is often used to store samples and put them in the laboratory for use in chromatographic analysis or other experiments. , Sample storage vial are very practical, it is a convenient suit for laboratory personnel.

Aijiren participated in Analytica China in Shanghai in 2020. At that time, Aijiren carefully designed the booth in order to promote the products, and went to Analytica China with full products and sincerity. This was to give customers more convenience and let the industry use it more. Those who know Aijiren, know Aijiren.

Aijiren has its own production factory. There are many production machinery and tools in the factory. Aijiren’s assembly line machine production needs to rely on molds with consistent specifications. The screw cap is shaped by pressing high-quality polypropylene into the mold. Aijiren needs to be polished. Molds, customized high-quality molds can guarantee the high standards of product production.

11mm Snap Closures are an extension of the crimp cap sealing system. Stretch the plastic cover on the edge of the 11mm Snap Vial, and form a seal by squeezing the Septa between the glass and the PP Cap. The advantage of the plastic snap cap is that it can be assembled without tools. 11mm Snap Closures is a simple sealing system. If 11mm Snap Closures have a very tight fit, they are difficult to apply and may crack. If the fit is too loose and the seal is not good, Septa may fall off.

The staff in the picture is disassembling the assembled 9mm Screw Neck Cap with Septa. These are 9mm Screw Neck Closures randomly selected from different machines. Since Aijiren produces more machines, many samples need to be checked. Solution to check whether Septa and Cap are damaged, if they are not sturdy, Septa may fall off or fall off easily. Aijiren’s strict quality inspection guarantees the quality of the product.

Aijiren’s 20mm headspace vial is a popular product of Aijiren, and its corresponding Aluminum Cap with PTFE/Silicone Septa is also a popular product of Aijiren. It is precisely because of Aijiren’s excellent quality and favorable price that Aijiren has become the most well-known chromatography in China. One of the manufacturers of consumables.

The 16mm COD Test Tube produced by Aijiren is mostly used for laboratory chemical analysis. Aijiren believes that COD Test Tube requires high-quality raw materials and advanced technology to complete the production, so Aijiren is very attentive to the production of COD Test Tube. Aijiren has been a veteran in the field of chromatography consumables with 20 years of production experience. He still maintains his original intention and puts the improvement of product quality in the first place.

Aijiren’s 9mm Amber Vial has a huge production workshop and many production lines. The 9mm Amber Vial provided by Aijiren is 100 pcs/pack. Generally speaking, it is packaged in PP Box. The minimum order quantity is 10 boxes. It supports two-in-one packaging with PP Closures or Individually packaged.

Aijiren¡¯s 9mm Screw Thread is short, and can be sealed with a slight rotation. The shoulder and neck lines are also very convenient for the autosampler to grab, and it is not easy to slip off. The vial can also customize the logo and whether it has a writing area. Aijiren will continue to make efforts for the convenience of the laboratory.

In addition to producing Autosampler Vial, Aijiren is also rich in matching Caps. Usually Caps are made of high-quality polypropylene for use in automatic sample injection vials. Aijiren uses a unified standard to produce PP Caps in an assembly line project to ensure that the Cap lines between batches are consistent and there is no difference. It is convenient for the customer’s laboratory sampling operation.

Nylon Syringe Filter material: high-density polypropylene PP for exterior wall; filter membrane: nylon. Filter area: §¶13mm-0.65cm2, §¶25mm-3.9cm2. Inlet pressure: §¶13mm-7bar, §¶25mm-5bar [1 bar (bar) = 100,000 Pa (Pa) = 10 Newton/square centimeter as the pressure unit] Temperature: 60-130 degrees Celsius. Features: Significantly hydrophilic, no need for pre-wetting. The pore size is uniform, and it has strong elasticity and adsorption force, which can ensure effective retention and meet the application requirements of fine filtration. It has good chemical compatibility, is compatible with most reagents, and does not shed fibers. It meets the standards of the pharmaceutical industry.

The workers of Aijiren in the picture are packaging the Micro-Insert. This kind of Micro-Insert is usually suitable for Autosampler Vial. For the Autosampler Vial of 9mm, 10mm, 11mm caliber, the capacity is 300ul, and the outer diameter is 5 or 6mm micro-insert. Both can be adapted, but for Autosampler vials with a diameter of 8mm, only micro-inserts with an outer diameter of 5mm can be used.

In addition, the material of Butyl determines that Septa is not easy to deform, even if it is used for a long time, it is stretched. Aijiren uses high-quality raw materials, which ensures that Butyl Septa will not break and contaminate the sample when it is penetrated by the automatic injection needle in time.

Aijiren Technologies is one of the leading manufacturers of automatic sample and hplc glass bottles for USP 1-type glass based in China. We are an ISO 9001:2000-tested company, and the company is also listed. Aijiren has export markets in the United States, the United Kingdom, Germany, Jordan, Iran, Ejitep, Nepal, Thailand, Indonesia, Malaysia and Australia.
In addition to producing HPLC Vials in accordance with ISO standards, Aijiren also manufactures HPLC Vials customized to customer-specific requirements. Our research and development department has been working hard to broaden its product line and develop more products that will make it more comfortable for our customers to buy laboratory supplies.

Aijiren finds the right size filter in order to ensure that customers can filter the particles correctly. It is recommended that you choose the diameter of the filter carefully. Aijiren produces usually sizes of 13 mm and 25 mm. Each of them has a different ability to hold particles. According to the sample size, the appropriate filter diameter can be selected. For example, a diameter of 13 mm can be used for samples of 1-10 ml. Similarly, 25 mm PVDF syringe filters can be used for sample volumes of 10-100 ml. Their retention is less than 100 ml.

The blue high-quality PP bottle cap of 9mm Screw Neck Closures will be combined with Septa. Aijiren has a unique patented method to combine Silicone and PTFE. Septa produced by this patented method is combined with a chemically inert Cap to avoid excessive evaporation and keep the sample bottle well sealed. It is recommended for short-term storage or liquid chromatography. Aijiren produces a variety of colors of 9mm Screw Neck Closures to choose from to meet different needs.

Aijiren’s sample storage vials are produced by fully automated machinery. This production method is efficient and consistent in specifications, and it is not easy to make errors. The packaging is a PP box, 100pcs is a box for packaging, the customer should purchase according to the box when purchasing, the minimum order quantity of Aijiren is 10 boxes.

PTFE disposable syringe filter is a fast, convenient and reliable filter tool, often used in laboratories. It has the characteristics of beautiful appearance, light weight and high cleanliness. Because there is no need to replace the filter membrane and clean the filter, it saves tedious and time-consuming preparation work. It is widely used in laboratories, widely used for sample pre-filtration, clarification and removal of particulate matter, and sterilization and filtration of liquids and gases.

Aijiren is a production-oriented enterprise with its own production plant and production workshop. Aijiren is committed to producing Autosampler Vial and its supporting Cap with Septa. Aijiren uses high-quality raw materials to produce Septa. The raw materials are free of impurities and pollution. They are processed in a dust-free workshop. Customers can buy with confidence, Aijiren supports factory inspection, welcome to Aijiren.

Septa-silica gel has strong repetitive sealability, and it can maintain good close performance after multiple injections; PTFE is a material with better chemical conditions at present, and it can withstand strong acids and alkalis. The two materials After compounding, the bottle can be used for various laboratory purposes such as sealed sampling, chemical storage and so on.

The 2ml hplc vials provided by Aijiren are well-known around the world and are loved by consumers from all over the world. The picture shows the Singaporean customer and the staff of Aijiren to learn about the 2ml hplc vials. Aijiren’s 2ml hplc vials production plant adopts fully automated production, and 2ml hplc Vials’ machinery and equipment are also semi-automatic, ensuring consistent specifications between batches and high quality and reasonable prices.

Aijiren’s 2ml hplc vial is suitable for most autosamplers, because this 2ml hplc vial has a standard thread/snap/crimp caliber pattern and a uniform shoulder distance, which is very convenient for the robot arm of the autosampler to grab it. As shown in the picture, Aijiren will prepare PP Boxes for Vial in advance, and wait for Vial’s production or printing before packaging and shipping.