Septa Workshop

Aijiren began to produce Autosampler Vial 20 years ago, which is often used in chromatographic analysis experiments. Aijiren uses machinery for mass production, which ensures the mass production of products. 100 pcs/pack is convenient for customers to use. The design of separate packaging for Vial and Cap. It is convenient for customers to seal after holding Autosampler Vial.

Aijiren’s I type transparent EPA storage glass vial is used for various analysis, sample, extraction and standard storage. , Bottle with PP fixed or open top cap. The fixed top cap is lined with fluoropolymer resin. The open top cap has an ultrasonically bonded 3.1mm fluoropolymer resin/silicone diaphragm for volatile organic compounds analysis.

Aijiren¡¯s 9mm Screw Thread is short, and can be sealed with a slight rotation. The shoulder and neck lines are also very convenient for the autosampler to grab, and it is not easy to slip off. The vial can also customize the logo and whether it has a writing area. Aijiren will continue to make efforts for the convenience of the laboratory.

Aijiren’s 2ml hplc vial is suitable for most autosamplers, because this 2ml hplc vial has a standard thread/snap/crimp caliber pattern and a uniform shoulder distance, which is very convenient for the robot arm of the autosampler to grab it. As shown in the picture, Aijiren will prepare PP Boxes for Vial in advance, and wait for Vial’s production or printing before packaging and shipping.

Aijiren’s septa can choose whether to have pre-slit or not. The pre-slit pattern is divided into one-shaped and cross-shaped. The septa with pre-slit is better to be pierced, especially for blunt automatic injection needles. , The cross star pre-slit septa can guide the automatic injection needle to accurately enter the vial to suck liquid, and will not deviate from the direction and cause the automatic injection needle to poke on the vial and cause the via to rupture.

Aijiren is a professional manufacturer of products such as Headspace Vials, which are large-capacity laboratory Vials. The capacity of such Vials ranges from 6ml-20ml. Generally, they are more commonly used for gas chromatography. This type of experiment requires heating the Headsapce Vials and the liquid held in it, and detecting the evaporated gas above the Vials, so the sealing performance of Headsapce Vials is required to be high.

Aijiren provides pre-assembled caps & septa, the dual-track cover pad assembly machine, used for the assembly of vial caps & septa, double tracks can greatly increase production efficiency; the pre-assembled vial closures can greatly reduce your experiment preparation work and improve experiment efficiency

Aijiren’s 9mm Screw Cap with Septa is automatically produced by machines. The same batch specifications meet the needs of customers for experiments. And mass production can also meet the orders of customers around the world, and mass orders can also be satisfied. Because of this, Aijiren’s fast shipping speed and good product quality have enabled Aijiren to become a world-renowned supplier of chromatography consumables.

Bule, white, red ptfe material
white, natural silicone material
Sufficient materials for makeing vial septa
Aijiren is professional vial septa maker for hplc gcms vials, sample vials

The PTFE layer of Aijiren’s 20mm PTFE Septa composite diaphragm is in contact with the reagent. It is chemically inert, resistant to acids, alkalis, temperature and adhesion. Even at high temperatures, it cannot work with concentrated acids, alkalis or strong oxidants. At the same time, the elasticity of the silicone rubber or silicone layer can ensure the sealing performance; Aijiren abides by strict production management to ensure the quality of the product. The product is clean and can be used directly without washing.

Septa-silica gel has strong repetitive sealability, and it can maintain good close performance after multiple injections; PTFE is a material with better chemical conditions at present, and it can withstand strong acids and alkalis. The two materials After compounding, the bottle can be used for various laboratory purposes such as sealed sampling, chemical storage and so on.

PTFE/silicone septa are most commonly used in HPLC applications, and pre-cut septa are easier to pierce with a needle. The cap color is generally black, but other special colors can also be produced accordingly. Easy to apply and easy to remove. Pre-installed caps and septa are very convenient. Aijiren 13mm Screw Closures are commonly used in 4ml Screw Top HPLC Vial. Aijiren can recommend the most suitable Closures for your HPLC Vial.

Aijiren¡¯s 1.5ml amber vial production plant has a professional production line and production team, and has been strictly checking the product quality during the production process. If any 1.5ml amber vial that does not meet the standard will be immediately eliminated, it is precisely because of Aijiren¡¯s strict product Controlling talents has created Aijiren’s brand effect today and has become a well-known supplier of chromatography consumables in China.

Aijiren is a manufacturer of chromatography consumables specializing in the production of glass products. Its products include Autosampler Vials, Headspace Vials, Sample Storage Vials, EPA Vials, COD Test Tubes, etc. High-quality glass products ensure that customers can analyze more conveniently Experiment.

Aijiren’s sample storage vials are produced by fully automated machinery. This production method is efficient and consistent in specifications, and it is not easy to make errors. The packaging is a PP box, 100pcs is a box for packaging, the customer should purchase according to the box when purchasing, the minimum order quantity of Aijiren is 10 boxes.

Unique dual-track cap and septa combination machine
Double track, double speed, double efficiency

13mm Screw Neck Closures are made of high-quality polypropylene. The thread shape inside the Cap can fit the automatic sample injection via very well, and it is also compatible with the automatic sampler. The 13mm Screw Neck Closures pre-assembled septum can reduce the chance of contamination during sample preparation and save time in laboratory sample preparation. Aijiren provides septa and slit septa. The normal available cap color is black, but other special colors can also be produced.

Aijiren adopts septa’s automated production, which guarantees Aijiren’s batch and efficient production. It is precisely because of this production that Aijiren has become a chromatographic consumable supplier in more than 200 regions around the world. If there is any need for chromatographic consumables, please Contact Aijiren.

20mm PTFE Septa can overcome the degradation that occurs due to long-term high temperature, because it is very common in silicone rubber septa. Degradation causes baseline drift and extra peaks. Therefore, the 20mm PTFE Septa produced by Aijiren is usually fixed with the PTFE side facing the column packing. For most GC/MS and other high-sensitivity detectors, Aijiren recommends septa materials with the PTFE logo; these are the cleanest and highest performing products. The PTFE septum contains very low levels of contaminants, which minimizes interference with the analysis and guarantees excellent results on all major LC/MS and GC/MS instruments.

Aijiren is a factory specializing in the production of Autosampler Vials, with professional production machinery and equipment and large-scale production factories. It is precisely because of such a strong production base that Aijiren can guarantee the production of large quantities of products. Aijiren has a considerable number of products in stock. The operation of multiple production lines also ensures the timeliness of customer orders.

Aijiren uses PP Boxes for packaging. Generally, Aijiren uses 100pcs/pack, and the box has strong anti-impact ability. It is not easy to cause the vial to break during transportation. Aijiren’s 2ml hplc Vial has three different calibers to choose from. Screw, crimp and snap, the openings are divided into 8mm-11mm, many types are convenient for customers to choose.

Aijiren has its own production workshop. In order to ensure the cleanliness of the inside of the production workshop, Aijiren has established a sanitary standard for a dust-free workshop. Employees entering the workshop need to change into uniforms. Before entering the workshop, dust must be removed inside the dust removal bellows to ensure Without bringing external dust into the workshop, the staff of Aijiren in the picture removes dust in front of the dust removal bellows.

Aijiren produces glass Vials products such as Autosampler Vials, Headspace Vials, COD Test Tube, EPA Vials, Sample Storage Vials, which are all key products produced by Aijiren. These products have good stability, can withstand high temperatures and low temperatures, and will not suffer from high chemical resistance. Reagents change the form of Vials. Aijiren produces these glass Vials to improve the efficiency of customer experiments.

Aijiren has more than ten years of production experience. Workers, test managers, and product development managers have rich experience in chromatography consumables. Aijiren has become one of the well-known manufacturers of chromatography consumables in China. Providing services in more than 200 countries and regions in the world, Aijiren will do better and work hard.

Aijiren presses Silicone and PTFE composite into the picture, and cuts them into rectangular sheets of similar size. Because PTFE is easy to curl and deform, the raw materials in the picture are all curled. Wait for it to enter the dryer to dry the moisture. Keep it level. Aijiren uses a mechanical laser to cut Septa, and guarantees the integrity and chemical nature of Septa.

Aijiren is a production-oriented enterprise with its own production plant and production workshop. Aijiren is committed to producing Autosampler Vial and its supporting Cap with Septa. Aijiren uses high-quality raw materials to produce Septa. The raw materials are free of impurities and pollution. They are processed in a dust-free workshop. Customers can buy with confidence, Aijiren supports factory inspection, welcome to Aijiren.

Aijiren’s 4ml threaded sample bottle (13-425) should be matched with 13mm Screw Closures, suitable for Aijiren, Waters, Varian, Shimadzu, PE, Diane and other types of chromatographic autosamplers. The 13mm Screw Closures produced by Aijiren have accurate thread sizes, and the width of the center hole ensures accurate collection by the autosampler. The 4ml transparent screw cap sample bottle (13-425) equipped with 13mm Screw Closures can also be used as a sample bottle and storage bottle.

Aijiren can merge septa and cap, and before the merger, the machine can automatically identify the front and back of septa, silicone and PTFE surface, choose to fix the PTFE side up into the Cap, fully automated production saves a lot of manpower, Aijiren Be able to invest more talents in quality inspection and product development.

The 24mm Screw Cap produced by Aijiren is often paired with 24mm Sample Storage Vial. This type of Vial is used to store samples and sometimes used in autosamplers. For example, 40ml Vial is often called EPA Vial, and the center hole on the Cap is here. It will be useful in time, the sampling tool can easily pierce through the septa for sampling without causing sample contamination.

The 9mm Screw Closures produced by Aijiren have many advantages such as high quality, strong adaptability, resistance to cracking, high temperature resistance, chemical resistance, etc. Since 9mm Screw Closures have many different styles and materials, the demand for 9mm Screw Closures is very high. High and diversified options also allow customers multiple choices.