Aijiren is usually packaged in PP box, 100 pieces are sold in a box. Closures can be packaged separately. As a production company, Aijiren can provide a large amount of spot production, and it can also meet multiple orders at the same time. Aijiren¡¯s lowest price The order quantity is 10 boxes, because sending too few products overseas will cause the postage to be higher than the product cost.
9mm Closures are formed by the combination of Cap and Septa. Screw Neck guarantees the tightness of 9mm Closures. Generally speaking, one end of PTFE faces the sample surface, because PTFE is highly inert and difficult to react with chemicals. Aijiren also supports separate orders for Cap and Septa.
11mm Snap Top Closures are made of PP. The translucent Cap design allows users to see the fixed card slot. The inside of the Snap Cap has 4 protrusions for fixing in the lateral groove of the Vial Neck.
Aijiren understands that 2ml HPLC vial are as important as chromatography columns or instruments. As a result, Aijiren 2ml HPLC sample vial are designed to meet the highest standards you can expect. So 2ml HPLC vial can be exported to 32 countries.
Caps are made of high quality polyproylene to exact manufacturing tolerances and lined in a controlled manufacturing environment, Cap colors are available in black only, Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.
The wide mouth of the 25mm Screw Vial guarantees the accuracy of sample injection and is not suitable for spilling. The large capacity of 20ml and 30ml also allows it to be used for storage while testing. Aijiren’s 25mm Screw Vial is often provided for water quality The testing laboratory, with a 10ml label, can accurately display the volume of the reagent in the vial.
Aijiren’s 30ml Screw Neck FTU Test Vial is a popular product of Aijiren. This Vial is often used by water quality testing laboratories. FTU Vial has two capacities to choose from, 20ml and 30ml. It can hold a lot of samples, and the high-temperature resistant material can ensure that the bottle will not cause problems during sample processing.
The Sample Cell Vial produced by Aijiren is often used for water quality testing. Its small size and flat design allow it to stand stably on a table or cabinet. Compared with the 16mm COD Test Tube, which is also used for water quality monitoring, it capacity is larger.
The Sample Cell Vial produced by Aijiren is made of high-quality borosilicate hydrochloric acid glass, which can not change shape at high temperature, and is inert and does not chemically react with reagents. The Black PP Screw Cap is also made of high temperature resistant material, and has good sealing performance, which can effectively ensure that the reagent will not spill.
The FTU Test Vial produced by Aijiren is often used for water sample testing. Usually FTU Vial is Screw Neck, 25mm opening ensures that the sample can be loaded into Vial more conveniently. The FTU Test Vial produced by Aijiren uses high-quality glass materials to ensure that the Vial does not deform under high temperatures.
Aijiren’s chromatography bottle has a wide-mouth crimp cap that provides a larger target area and improves the accuracy of the autosampler needle. Can be made of clear and amber glass. The label can be written area, can help the experimenter to distinguish the sample type.
The Crimp Vial produced by Aijiren has a standard 11.6x32mm shape and is compatible with 11mm aluminum sealing caps. Hand Crimper is required for crimp sealing and Decrimper for unsealing. Aijiren provides supporting 11mm Hand Crimper and Decrimper, which are easy to operate and well sealed.
The opening of the vial produced by Aijiren is 40% larger than the standard opening aluminum sealed bottle
It is made of transparent Class 1 Class A or Amber, Class 1 Class B borosilicate glass
Sample vials provide standard progressive pasteable patches for easy filling and identification
The crimp vials produced by Aijiren are made of transparent or amber type 1 borosilicate glass or polypropylene. Requires crimper and lid opener. Very suitable for long-term storage. Deactivation and MS authentication can also be used.
All Aijiren vials are very suitable for autosamplers and have good chemical compatibility and ultra-cleanliness. The crimp top sample bottle is currently the most commonly used gas sampling bottle on the market. The sample bottle with a volume of 2ml is especially suitable for laboratory use. At the same time, the bottom of some sample bottles is designed with a round bottom, so it has a flat bottom function and is compatible with automatic sampling equipment.
• Widely used in HPLC applications, universally usable vials for almost autosamplers, include the one with robotic handing.
• Snap vials can be closed with either snap caps or crimp caps.
• Snap caps can be easy as push-on, pull-off by hand.
• Clear glass vials–made from USP Type I, Class A, 33Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51Borosilicate Glass.
Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand. A audible click ensures a secure seal has been formed and that the cap is correctly aligned. Precision-formed neck improves autosampler handling.
Snap caps provide a secure seal that minimizes evaporation, even with volatile samples. Snap caps are often more convenient than crimp caps as they can easily be applied and removed by hand. An audible click ensures a secure seal has been formed and that the cap is correctly aligned. Snap/crimp vials can be closed with either snap caps or crimp caps.
11mm Gc Snap Top Caps With Ptfe Silicone Septa For 2ml Snap Vials , Find Complete Details about 11mm Gc Snap Top Caps With Ptfe Silicone Septa For 2ml Snap Vials,Auto Sampler Vial,Hplc Vial,Snap Vial from Supplier or Manufacturer-Jiangyin Allpro Polymer Technology Co., Ltd.
“Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass
Aijiren Vials have a standard graduated write-on patch for easy filling and identification
Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals
Snap caps or aluminum seals ensure a secure seal for samples”
Snap Cap Vials Wide opening vial is easier to fill and provides a larger target area for the autosampler needle Fit most autosamplers that accommodate the 12x32mm vial format Superior quality 33 expansion borosilicate clear glass Type 1, (Class A) or 51A amber glass Uniformly flat
“Aijiren Vials have a standard 11.6x32mm profile and are compatible with convenient 11mm snap cap or aluminum seal closures
The “Step” design ensures proper centering of limited volume inserts, eliminating missed injections
Aijiren Vials have a 40% larger opening than standard aluminum seal vials for easier sample filling and to reduce the chance of bent or broken needles during sampling”
Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short term storage. Deactivation, MS Certification is also available.
Snap seal vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.
Clear Glass Screw Thread Vials are 2mL, 12x32mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.
Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.
Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.
Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Glass vials are available in 2 ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.
2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.
All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.
Caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate and is great for nail polish remover and higher concentration acids & alkalis. Good for non-oil products filled at room temperature. Because this lining system is paperless, your samples will not be contaminated with fiber or paper particles from the closure. Available in Phenolic caps.
These caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. Great for everything from liquids, to soaps, to macro-invertebrates.
The non-pre-slit septas help to reduce carryover from vial to vial because the resealing characteristics of the septum act as a squeegee to wipe solution from the outside of the needle. Typically, a non-slit septum exhibits resealing capabilities for a limited number of needle punctures but for long-term storage in the vial, using a new non-punctured septum is best practice.
Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process
The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.
Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.
Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.
Red PTFE/White silicone septa + Black cap without hole, for 4ml screw top vial SV104CS 15x45mm vials have a 13-425 GPI thread and can hold up to 4ml of sample. Use the 13 x 425 caps with septa for use as sample vials and with diffusion caps for wash vials. With closed top screw seals, these vials can also be used as storage vials.
Aijiren Storage vial is an ideal device for general laboratory use and storage of diverse samples due to excellent sealability and chemical tolerance.
Besides, chemically inert caps are a good choice for most chromatography and storage applications. Top grade PTFE or Silicone septa are adopted to ensure cleaning production and consistent quality of sample vials.
Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.
These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials for consistent productivity on every separation.
Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml.
Storage Vial is supplied by Aijiren. These vials are pre-sterilized and have a capacity of 40ml. These vials can be used for storing biological material, human and animal cells. The cap is provided with a built-in seal ring which makes the vial leakproof. The base of the vial has longitudinal grooves which gives it a non-twisting character when placed in a vial rack.
Polyethylene SepCap with starburst center design eases syringe needle penetration
Convenient vial kits include equal quantities of vials and caps
Polyspring inserts are self-aligning and provide a cushion against needle contact
Microsampling vials allow maximum sample extraction without need for separate inserts
The Aijiren sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.
Open top 40ml vial and cap with welded septum ,Pack of 100.
The only low-level certified vials in the market for Total Organic Carbon testing and sampling. Major TOC instrument manufacturers use and recommend these vials.
Vials certified, and ready to use.
Each lot of vials is tested and certified.
Buy Aijiren Sample Storage Vial online at wholesale rates. If you have been looking for Sample Storage Vial, your search ends here as you can get the best Sample Storage Vial in China. You can purchase Sample Storage Vial of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Sample Storage Vial prices, you can be totally sure to get the best rates as Aijiren brings you genuine Sample Storage Vial rates and quality assured products. Procure Sample Storage Vial today and avail the best offers on your purchase.
The manufacturer’s lot number for each component of this product is tracked until all procedures are completed at which time a final lot number is assigned and documented. A randomly selected collection of vials from each completed lot are submitted to an independent validation laboratory for quality control purposes to confirm that the TOC vials comply with the quality specification. The vial, closure and dust cover undergo comply with stringent quality standards and specifications.
Storage Vial is supplied by Aijiren. These vials are pre-sterilized and have a capacity of 5ml. These vials can be used for storing biological material, human and animal cells. The cap is provided with a built-in seal ring which makes the vial leakproof. The base of the vial has longitudinal grooves which gives it a non-twisting character when placed in a vial rack.
The production process of high-performance total organic carbon (TOC) sample bottles is kept clean, and the workshop and production process are guaranteed to be clean, which can reduce instrument background and ensure top-level system performance for low-level monitoring.
It is equipped with a polypropylene cap with an open top and a PTFE/silicone low-leakage gasket bonded to the cap. The level 1 vials have been assembled and quality checked before leaving the factory.
You know the importance of using clean vials in the USP water quality test. As the manufacturer of TOC Vials, container cleanliness is also very important to us. Our ultra-low TOC vials are the cleanest-analyzed and verified to ensure data quality and defensibility.
40 mL vials certified TOC <10 ppb
After analysis and verification in our accredited laboratory
Silicone and PTFE lined cover and dust cover
Excellent vial to vial consistency
Order as individual sample storage vials and closures or as unassembled convenience kits.
Unassembled convenience kits saves time during sample preparation.
Solid-top convenience kits include matched quantities of vials and screw caps with pre-assembled septa.
Open-top convenience kits contain shrink-wrapped vials and separately packaged caps and septa in polybags.
Storage glassware manufactured in Type 1, Class A, 33 expansion borosilicate glass
Capacity ranges from 2mL to 60mL
Provide constant pH for duration of sample storage life
Chemically inert caps suitable for most chromatography and storage applications
Top grade PTFE/silicone septa used for cleanliness
Open top 40ml vial and cap with welded septum ,Pack of 100. The only low-level certified vials in the market for Total Organic Carbon testing and sampling. Major TOC instrument manufacturers use and recommend these vials.
Trust our certified vials for Total Organic Carbon testing and sampling. TOC-certified products are manufactured, packaged and tested to exacting standards.
Our storage vials, also known as step vials or dram vials offer a great solution for storing solvents for extended periods of time. Our screw thread vials offer enough threads per inch to eliminate evaporaton with a solid top or lined cap.
Storage glassware manufactured in Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass
Capacity ranges from 20mL to 60mL
Provide constant pH for duration of sample storage life
Chemically inert caps suitable for most chromatography and storage applications
Top grade PTFE/silicone septa used for cleanliness
Manufactured in state of the art moulding facility using high purity virgin polypropylene.
PP Material confirming to US FDA 21 CFR.
Used for storage of PCR reagents, enzymes and other diagnostics and biochemical reagents or sample.
HDPE screw closure is leak proof.
Can be used at low temprature.
Amber Storagr Vial can be used for light sensitive samples.
The flat bottom profile can keep stable standing, and reduced sprinkle. Borosilicate glass is used as main material to enhance corrosion and temperature resistance. Superior quality with a favorable price is worthy of your order and more and cheaper.
In this test a reagent blank is used instead of the usual water blank referred to in the general photometer operating instructions. The reagent blank is prepared by adding deionised or distilled water to the reagent tube and then digesting the tube in the same manner as for the water sample.
It is not necessary to prepare a reagent blank each time the test is carried out. The reagent blank tube may be prepared weekly and used repeatedly with all samples prepared from the same batch of reagent tubes. The reagent blank should be stored in the dark between uses.
Chemical oxygen demand is a vital test for assessing the quality of effluents and waste waters prior to discharge. The Chemical Oxygen Demand (COD) test predicts the oxygen requirement of the effluent and is used for monitoring and control of discharges, and for assessing treatment plant performance. The impact of an effluent or waste water discharge on the receiving water is predicted by its oxygen demand. This is because the removal of oxygen from the natural water reduces its ability to sustain aquatic life. The COD test is therefore performed as routine in laboratories of water utilities and industrial companies.
With the Aijiren COD tube test, each user can easily perform highly sensitive and accurate water detection.
The time required for the measurement process is significantly shortened, especially for standard analysis and series measurement, while significantly reducing the workload.
The COD Test tube contains a precise dose of reagent. Therefore, excessive chemical inventory is avoided and work safety is improved.
The Chemical Oxygen Demand (COD) test is widely used as a measure of organic contamination by determining the quantity of oxygen required for oxidation of reduced species including organic matter, in a water sample using a specific oxidizing agent, temperature and time reduction. COD testing is a good better indicator of organic pollutants in industrial wastewater containing cyanides and heavy metals. COD testing affords rapid response to changing conditions before critical problems develop.
Details of Chemical Oxygen Demand Test:
2mL of a water or watse water sample are added to a 16mm glass culture tube containing the digestion reagent and a catalyst. The tube is capped with a polypropylene, PTFE lined cap and heated in a block digester at 150C for 2 hours. The orange Hexavalent chromium is reduced to a greenish trivalent chromium. The analytical range for the spectrophotometric method is 5-150ppm (measured at 420nm).
Aijiren offers a variety of sizes and styles of containers, including the popular 40mL autosampler vials.
Can be used as:
Sampling and storage containers
Sample bottle compatible with autosampler
The storage bottle was provided by Aijiren. These vials have been pre-sterilized and have a capacity of 30ml. These vials can be used to store biological materials, human and animal cells. The cap has a built-in sealing ring to prevent the sample bottle from leaking. The bottom of the sample bottle has a longitudinal groove, and when placed in the sample bottle rack, it has the characteristic of not twisting.
Aijiren uses type 1, type A, 33 expanded borosilicate glass or 51A amber glass for storage glassware, with a capacity from 20mL to 60mL, providing a constant pH value to maintain the life of the sample.
It can also be used in cosmetic liquids, essential oils, etc. All bottle caps have screw-in black polypropylene caps. Easy to carry, easy to place in the family. With screw cover, it is well sealed to avoid leakage. Used to store small amounts of chemical solutions and fumes
Superior quality 33 expansion borosilicate clear (Type 1, Class A) or 51A amber (Type 1, Class B) glass vials, PTFE-lined solid-top storage caps, PTFE on film/foam backing offers broad chemical resistance, Not autoclavable, Pack of 100