Autosampler Vials Factory

Aijiren’s factory is established in Quzhou, Zhejiang, which is close to the river and developed by land and water. Usually, Aijiren will notify the relevant freight forwarding company to pick up and deliver the goods after the production is completed. Generally speaking, the shipment can be completed within 3 days after the production is completed. , The next step is the time for water transportation. If the demand is not particularly large, then customers can consider express or air freight, which will be faster.

When Aijiren produces screw top hplc vial, it will produce matching screw neck PP Cap, and different calibers and different types of vial require different Caps. In this case, new molds need to be polished for Cap production. The worker in the picture is here. For the grinding of the new mold, only the use of a suitable mold to install on an automated production machine can mass produce a suitable PP Screw Neck Cap.

There are two types of 24mm Screw neck Cap, center hole and closed-top. The cap with center hole can be more convenient for sample injection. The closed top can store samples and has better sealing. It can have its own for 20ml-60ml. Storage range and capacity.

But for autosamplers with blunt autosampler needles, Aijiren still recommends buying septa with pre-slit, because this can prevent the septa from being pushed into the vial by the autosampler and contaminate the sample. Septa with pre-slit can complete the function of guiding the automatic injection needle.

PTFE/silicone septa are most commonly used in HPLC applications, and pre-cut septa are easier to pierce with a needle. The cap color is generally black, but other special colors can also be produced accordingly. Easy to apply and easy to remove. Pre-installed caps and septa are very convenient. Aijiren 13mm Screw Closures are commonly used in 4ml Screw Top HPLC Vial. Aijiren can recommend the most suitable Closures for your HPLC Vial.

Aijiren has always insisted on using high-quality glass, because only the quality of the glass is high enough to be compatible with more samples and more convenient for customers to experiment. Therefore, Aijiren decided on borosilicate glass after various comparisons. This glass is not only resistant to high temperature and corrosion It is also inert and not easily broken, which is very suitable for large-capacity 60ml sample storage vial.

Unique dual-track cap and septa combination machine
Double track, double speed, double efficiency

Aijiren is a professional manufacturer of products such as Headspace Vials, which are large-capacity laboratory Vials. The capacity of such Vials ranges from 6ml-20ml. Generally, they are more commonly used for gas chromatography. This type of experiment requires heating the Headsapce Vials and the liquid held in it, and detecting the evaporated gas above the Vials, so the sealing performance of Headsapce Vials is required to be high.

Aijiren has its own production workshop. In order to ensure the cleanliness of the inside of the production workshop, Aijiren has established a sanitary standard for a dust-free workshop. Employees entering the workshop need to change into uniforms. Before entering the workshop, dust must be removed inside the dust removal bellows to ensure Without bringing external dust into the workshop, the staff of Aijiren in the picture removes dust in front of the dust removal bellows.

Aijiren’s production maintains strict quality control to ensure that the size of each batch of 9mm Screw Closures is consistent. The high-quality production quality inspection has ensured the consistent match between Cap and Septa. The lid is made of high-quality polypropylene with precise manufacturing tolerances. The septum is made of the highest quality material to ensure the normal operation of the auto-injector.

Aijiren not only produces autosampler vial, but also accessories for autosampler vial. Cap with Septa, especially the production of Cap, needs to be exactly the same as Autosampler Vial. It must also produce different types of Cap with different necks. Aijiren is a high-quality company. Chromatography consumable manufacturers, there is no error between the PP Cap produced, and it can perfectly match Autosampler Vials

Aijiren’s 9mm Autosampler Vial, Screw Threads neck fits perfectly with Closures, and the thread seal is also convenient for customers to operate. This type of vial is a hot selling model that can be applied to all models of Autosampler.

Aijiren provides Cap customization services. Customers can customize Cap according to their own experimental needs. As long as Aijiren can provide them, Aijiren will try to provide customized services. Today, Aijiren is already a well-known supplier of chromatography consumables in China. Aijiren will continue to work hard to improve itself, broaden its product line, and maintain high-quality production.

Aijiren’s 2ml hplc vial adopts a fully automated production method, mass production guarantees a large amount of daily production, Aijiren has 6 vial production lines, and can also be customized for logo or label, scale printing, and closures. Aijiren Provide the option of purchasing vial/cap separately or purchasing vial and cap together.

Aijiren is a factory specializing in the production of Autosampler Vials, with professional production machinery and equipment and large-scale production factories. It is precisely because of such a strong production base that Aijiren can guarantee the production of large quantities of products. Aijiren has a considerable number of products in stock. The operation of multiple production lines also ensures the timeliness of customer orders.

The PTFE layer of Aijiren’s 20mm PTFE Septa composite diaphragm is in contact with the reagent. It is chemically inert, resistant to acids, alkalis, temperature and adhesion. Even at high temperatures, it cannot work with concentrated acids, alkalis or strong oxidants. At the same time, the elasticity of the silicone rubber or silicone layer can ensure the sealing performance; Aijiren abides by strict production management to ensure the quality of the product. The product is clean and can be used directly without washing.

24mm Silicone/PTFE Septa is matched with 24mm screw neck cap, suitable for 24mm screw sample storage vial. Aijiren has an exclusive production technology that can compound PTFE and Silicone without adding any adhesives, so Aijiren’s Septa is soft and not easily deformed.

Aijiren’s 2ml hplc vial is suitable for most autosamplers, because this 2ml hplc vial has a standard thread/snap/crimp caliber pattern and a uniform shoulder distance, which is very convenient for the robot arm of the autosampler to grab it. As shown in the picture, Aijiren will prepare PP Boxes for Vial in advance, and wait for Vial’s production or printing before packaging and shipping.

The Silicone/PTFE Septa produced by Aijiren uses high-quality raw materials and an exclusive compounding process. This process does not require any adhesives to compound Septa and Silicone to achieve no cracking, no falling off, and a perfect fit for autosampler vial and antosampler.

Aijiren has more than ten years of production experience. Workers, test managers, and product development managers have rich experience in chromatography consumables. Aijiren has become one of the well-known manufacturers of chromatography consumables in China. Providing services in more than 200 countries and regions in the world, Aijiren will do better and work hard.

Aijiren’s 9mm Screw Cap with Septa is automatically produced by machines. The same batch specifications meet the needs of customers for experiments. And mass production can also meet the orders of customers around the world, and mass orders can also be satisfied. Because of this, Aijiren’s fast shipping speed and good product quality have enabled Aijiren to become a world-renowned supplier of chromatography consumables.

The 9mm amber vial produced by Aijiren has high quality and favorable price. Aijiren has its own factory, which can meet the customized needs of customers. Aijiren’s 9mm amber vial is often used in autosamplers and can be adapted to most brands on the market. Autosampler. 9mm amber vial is a popular product of Aijiren.

The worker of Aijiren shown in the picture is inserting a 22mm Silicone/PTFE Septa into a 24mm Screw neck Cap. The worker wears finger cots and holds a tool to press harder to consolidate the tightness of the Cap and Septa. Since Aijiren’s automated merging of Cap and Septa machines is only suitable for the closure of 2ml autosampler vial, this large-volume closure requires manual combination by workers. Aijiren uses a dust-free workshop for production and packaging, so customers can be completely assured of hygiene issues.

The staff in the picture is disassembling the assembled 9mm Screw Neck Cap with Septa. These are 9mm Screw Neck Closures randomly selected from different machines. Since Aijiren produces more machines, many samples need to be checked. Solution to check whether Septa and Cap are damaged, if they are not sturdy, Septa may fall off or fall off easily. Aijiren’s strict quality inspection guarantees the quality of the product.

The 24mm Screw Cap produced by Aijiren is often paired with 24mm Sample Storage Vial. This type of Vial is used to store samples and sometimes used in autosamplers. For example, 40ml Vial is often called EPA Vial, and the center hole on the Cap is here. It will be useful in time, the sampling tool can easily pierce through the septa for sampling without causing sample contamination.

13mm Screw Neck Closures are made of high-quality polypropylene. The thread shape inside the Cap can fit the automatic sample injection via very well, and it is also compatible with the automatic sampler. The 13mm Screw Neck Closures pre-assembled septum can reduce the chance of contamination during sample preparation and save time in laboratory sample preparation. Aijiren provides septa and slit septa. The normal available cap color is black, but other special colors can also be produced.

Aijiren’s I type transparent EPA storage glass vial is used for various analysis, sample, extraction and standard storage. , Bottle with PP fixed or open top cap. The fixed top cap is lined with fluoropolymer resin. The open top cap has an ultrasonically bonded 3.1mm fluoropolymer resin/silicone diaphragm for volatile organic compounds analysis.

Aijiren uses PP Boxes for packaging. Generally, Aijiren uses 100pcs/pack, and the box has strong anti-impact ability. It is not easy to cause the vial to break during transportation. Aijiren’s 2ml hplc Vial has three different calibers to choose from. Screw, crimp and snap, the openings are divided into 8mm-11mm, many types are convenient for customers to choose.

Aijiren adopts the latest production technology. The fully automated production line can meet mass production. Sample Storage Vial has undergone strict quality inspection during production. Any vial that fails the quality inspection will be returned for reprocessing. Aijiren has its own quality inspection. The system and design laboratory will always strive to bring more updated products and better product experience to customers.

The Aijiren staff in the picture is using a vernier caliper to detect 2ml HPL Vials. The thread of the amber glass hplc vial in the picture is the type of screw neck. This type of threaded hplc vial is very convenient for sealing and storage, and it is easy to operate. Autosampler Vials is the first choice of many customers. Secondly, the amber glass can avoid ultraviolet rays and protect the samples. Staff needs to check whether the specifications meet the standards, and need to check the production status of the glass texture.