24mm Silicone/PTFE Septa

Aijiren Provide ODM OEM service
the custom logo can be printed on the vials in printing workwhop
through plate making, printing, High temperature baking, to packing
2-3 times checking during the whole process to make sure high quality

Unique dual-track cap and septa combination machine
Double track, double speed, double efficiency

The Septa produced by Aijiren is suitable for Autosampler Vials. Septa is to help Autosampler Vials to seal. The design of Cap with Septa facilitates the sampling of autosamplers. Aijiren, as a manufacturing enterprise, also requires Autosampler Vial accessories, Cap with Septa. It is produced carefully, using first-class equipment and exclusive craftsmanship. In the picture, Septa is drying.

Aijiren is a professional manufacturer of products such as Headspace Vials, which are large-capacity laboratory Vials. The capacity of such Vials ranges from 6ml-20ml. Generally, they are more commonly used for gas chromatography. This type of experiment requires heating the Headsapce Vials and the liquid held in it, and detecting the evaporated gas above the Vials, so the sealing performance of Headsapce Vials is required to be high.

Aijiren offers a variety of sizes and styles of containers, including the popular 40mL autosampler vials. Sample Storage Vial can be used as: Sampling and storage containers, sample vial compatible with autosampler, culture tube, TOC test, USP Method 643 test, Capture high-purity water offline, Store verification standards.

Purchasing Aijiren’s 9mm hplc sample bottle requires the purchase of 9mm Screw Cap with Septa. Aijiren’s Caps are made of high-quality polypropylene. You can choose whether to have a center hole cover. The septum uses a double-sided combination of PTFE and silicone. The assembled lid and septum are very convenient for customers to use.

Aijiren’s 2ml hplc vial is suitable for most autosamplers, because this 2ml hplc vial has a standard thread/snap/crimp caliber pattern and a uniform shoulder distance, which is very convenient for the robot arm of the autosampler to grab it. As shown in the picture, Aijiren will prepare PP Boxes for Vial in advance, and wait for Vial’s production or printing before packaging and shipping.

20mm PTFE Septa can overcome the degradation that occurs due to long-term high temperature, because it is very common in silicone rubber septa. Degradation causes baseline drift and extra peaks. Therefore, the 20mm PTFE Septa produced by Aijiren is usually fixed with the PTFE side facing the column packing. For most GC/MS and other high-sensitivity detectors, Aijiren recommends septa materials with the PTFE logo; these are the cleanest and highest performing products. The PTFE septum contains very low levels of contaminants, which minimizes interference with the analysis and guarantees excellent results on all major LC/MS and GC/MS instruments.

Aijiren presses Silicone and PTFE composite into the picture, and cuts them into rectangular sheets of similar size. Because PTFE is easy to curl and deform, the raw materials in the picture are all curled. Wait for it to enter the dryer to dry the moisture. Keep it level. Aijiren uses a mechanical laser to cut Septa, and guarantees the integrity and chemical nature of Septa.

Aijiren is a production-oriented enterprise with its own production plant and production workshop. Aijiren is committed to producing Autosampler Vial and its supporting Cap with Septa. Aijiren uses high-quality raw materials to produce Septa. The raw materials are free of impurities and pollution. They are processed in a dust-free workshop. Customers can buy with confidence, Aijiren supports factory inspection, welcome to Aijiren.

Aijiren uses a dust-free workshop to produce 9mm closures. The 9mm closures produced in a dust-free workshop have strict quality standards and uniform threads, which guarantee the quality of Aijiren’s products. Aijiren is planning to use product quality to build brand awareness and become a world-renowned supplier of chromatography consumables.

Bule, white, red ptfe material
white, natural silicone material
Sufficient materials for makeing vial septa
Aijiren is professional vial septa maker for hplc gcms vials, sample vials

The special packaging used in the 2ml vial in the picture, 100pcs in a box with a partition to separate the vial. This kind of packaging is not only more compact and beautiful, but also can better alleviate the vibrations that occur during transportation and protect the vial. At the same time, it can also bring the brand logo printed on the box, Aijiren can meet the customer’s packaging customization plan, only need to communicate the details in place and pay the corresponding packaging costs.

Aijiren has its own production workshop. In order to ensure the cleanliness of the inside of the production workshop, Aijiren has established a sanitary standard for a dust-free workshop. Employees entering the workshop need to change into uniforms. Before entering the workshop, dust must be removed inside the dust removal bellows to ensure Without bringing external dust into the workshop, the staff of Aijiren in the picture removes dust in front of the dust removal bellows.

PTFE/silicone septa are most commonly used in HPLC applications, and pre-cut septa are easier to pierce with a needle. The cap color is generally black, but other special colors can also be produced accordingly. Easy to apply and easy to remove. Pre-installed caps and septa are very convenient. Aijiren 13mm Screw Closures are commonly used in 4ml Screw Top HPLC Vial. Aijiren can recommend the most suitable Closures for your HPLC Vial.

Aijiren¡¯s 9mm Screw Thread is short, and can be sealed with a slight rotation. The shoulder and neck lines are also very convenient for the autosampler to grab, and it is not easy to slip off. The vial can also customize the logo and whether it has a writing area. Aijiren will continue to make efforts for the convenience of the laboratory.

In addition to producing Autosampler Vial, Aijiren is also rich in matching Caps. Usually Caps are made of high-quality polypropylene for use in automatic sample injection vials. Aijiren uses a unified standard to produce PP Caps in an assembly line project to ensure that the Cap lines between batches are consistent and there is no difference. It is convenient for the customer’s laboratory sampling operation.

Aijiren’s 8mm Septa is made of Silicone and PTFE raw materials. Aijiren cuts Pre-slit on Septa for the convenience of customers. The pattern is a font and a cross. The cross-shaped pre-slit septa is the best. It is convenient for the automatic injection needle to puncture. If the customer uses a blunt needle, you can consider buying a cross-type pre-slit septa.

The 24mm Screw Cap produced by Aijiren is often paired with 24mm Sample Storage Vial. This type of Vial is used to store samples and sometimes used in autosamplers. For example, 40ml Vial is often called EPA Vial, and the center hole on the Cap is here. It will be useful in time, the sampling tool can easily pierce through the septa for sampling without causing sample contamination.

Aijiren adopts septa’s automated production, which guarantees Aijiren’s batch and efficient production. It is precisely because of this production that Aijiren has become a chromatographic consumable supplier in more than 200 regions around the world. If there is any need for chromatographic consumables, please Contact Aijiren.

Aijiren has strict production requirements, meets ISO9001 certification, and the quality of the 2ml amber vial’s raw materials is high, which can protect light-sensitive samples from deterioration due to UV interference.

Aijiren’s factory is established in Quzhou, Zhejiang, which is close to the river and developed by land and water. Usually, Aijiren will notify the relevant freight forwarding company to pick up and deliver the goods after the production is completed. Generally speaking, the shipment can be completed within 3 days after the production is completed. , The next step is the time for water transportation. If the demand is not particularly large, then customers can consider express or air freight, which will be faster.

Aijiren’s 9mm Autosampler Vial, Screw Threads neck fits perfectly with Closures, and the thread seal is also convenient for customers to operate. This type of vial is a hot selling model that can be applied to all models of Autosampler.

Aijiren began to produce Autosampler Vial 20 years ago, which is often used in chromatographic analysis experiments. Aijiren uses machinery for mass production, which ensures the mass production of products. 100 pcs/pack is convenient for customers to use. The design of separate packaging for Vial and Cap. It is convenient for customers to seal after holding Autosampler Vial.

When Aijiren produces screw top hplc vial, it will produce matching screw neck PP Cap, and different calibers and different types of vial require different Caps. In this case, new molds need to be polished for Cap production. The worker in the picture is here. For the grinding of the new mold, only the use of a suitable mold to install on an automated production machine can mass produce a suitable PP Screw Neck Cap.

Aijiren’s 2ml hplc vial adopts a fully automated production method, mass production guarantees a large amount of daily production, Aijiren has 6 vial production lines, and can also be customized for logo or label, scale printing, and closures. Aijiren Provide the option of purchasing vial/cap separately or purchasing vial and cap together.

Aijiren adopts the latest production technology. The fully automated production line can meet mass production. Sample Storage Vial has undergone strict quality inspection during production. Any vial that fails the quality inspection will be returned for reprocessing. Aijiren has its own quality inspection. The system and design laboratory will always strive to bring more updated products and better product experience to customers.

Aijiren’s production maintains strict quality control to ensure that the size of each batch of 9mm Screw Closures is consistent. The high-quality production quality inspection has ensured the consistent match between Cap and Septa. The lid is made of high-quality polypropylene with precise manufacturing tolerances. The septum is made of the highest quality material to ensure the normal operation of the auto-injector.

Aijiren produces glass Vials products such as Autosampler Vials, Headspace Vials, COD Test Tube, EPA Vials, Sample Storage Vials, which are all key products produced by Aijiren. These products have good stability, can withstand high temperatures and low temperatures, and will not suffer from high chemical resistance. Reagents change the form of Vials. Aijiren produces these glass Vials to improve the efficiency of customer experiments.

But for autosamplers with blunt autosampler needles, Aijiren still recommends buying septa with pre-slit, because this can prevent the septa from being pushed into the vial by the autosampler and contaminate the sample. Septa with pre-slit can complete the function of guiding the automatic injection needle.