13mm Syringe Filter on Sale

The 9mm screw cap produced by Aijiren has a center hole to facilitate the sampling of the injection needle of the autosampler. The injection needle will penetrate the septa and enter the interior of the vial for extraction. The thread pattern of the 9mm screw cap fits closely with the vial. Septa is slightly squeezed between the cap and vial to fill the gap, so the sealing is extremely high.

The Crimp Closures produced by Aijiren are made of aluminum. This metal Cap is very strong and will not leak air after the Hand Crimper is sealed. Aijiren uses plastic sealed bags to pack 100pcs/pack. If customers need, Aijiren also provides plastic cans. This kind of packaging can reduce squeezing and ensure that each closure is complete.

The compatibility or chemical resistance of 20mm Grey Butyl Septa with samples and solvents can be consulted by Aijiren’s salesperson. Butyl’s tightness makes 20mm Grey Butyl Septa suitable for multiple injections or storage. The 20mm Grey Butyl Septa has a thickness of 3mm, which has good sealing properties and facilitates the puncture of the autosampler needle. It is not thick enough to affect the puncture. PTFE is the most inert resistance of the septum, and Aijiren’s bonding process makes Septa not easy to fall off.

11mm Snap Closures are an extension of the crimp cap sealing system. Stretch the plastic cover on the edge of the 11mm Snap Vial, and form a seal by squeezing the Septa between the glass and the PP Cap. The advantage of the plastic snap cap is that it can be assembled without tools. 11mm Snap Closures is a simple sealing system. If 11mm Snap Closures have a very tight fit, they are difficult to apply and may crack. If the fit is too loose and the seal is not good, Septa may fall off.

And the nylon membrane syringe filter produced by Aijiren can be used for alkaline blotting and fixation. If fixing methods such as baking and ultraviolet light are used, higher nucleic acid detection sensitivity can be obtained. Since the nylon membrane is a hydrophilic membrane, it does not need to be immersed in a solution such as ethanol or methanol for activation. The nylon syringe filter produced by Aijiren is only for professionals to use for scientific research, not for food.

In addition, the material of Butyl determines that Septa is not easy to deform, even if it is used for a long time, it is stretched. Aijiren uses high-quality raw materials, which ensures that Butyl Septa will not break and contaminate the sample when it is penetrated by the automatic injection needle in time.

Aijiren recommends that each syringe filter be used only about 10 times. If there are too many impurities in the reagent, the pore size of the syringe filter will be blocked and the filtration task cannot be completed. The Syringe filter provided by Aijiren has a favorable price and good quality. It is very suitable to change to a new Syringe filter to continue filtering after using it several times.

Aijiren’s 9mm Screw Neck Autosampler Vial is one of Aijiren’s most popular products. The screw neck and 2ml capacity are very compatible with the specifications of the autosampler, especially Aijiren’s 100pcs/pack, which is very convenient for customers to use. It is well received, has strong stability and is not easily affected by other reagents.

Nylon Syringe Filter material: high-density polypropylene PP for exterior wall; filter membrane: nylon. Filter area: §¶13mm-0.65cm2, §¶25mm-3.9cm2. Inlet pressure: §¶13mm-7bar, §¶25mm-5bar [1 bar (bar) = 100,000 Pa (Pa) = 10 Newton/square centimeter as the pressure unit] Temperature: 60-130 degrees Celsius. Features: Significantly hydrophilic, no need for pre-wetting. The pore size is uniform, and it has strong elasticity and adsorption force, which can ensure effective retention and meet the application requirements of fine filtration. It has good chemical compatibility, is compatible with most reagents, and does not shed fibers. It meets the standards of the pharmaceutical industry.

The screw closures produced by Aijiren are used for 9mm screw vial. 9mm screw vial is the most commonly used autosampler vial. Because of the 9mm opening and 12*36mm bottle body, it is compatible with most types of autosamplers and the convenience of screw closures It has also become the reason why screw vial sells well.

The thread of the magnetic metal cap fits closely with the Headspace Vial, and the thickness of Septa can also ensure that it is slightly squeezed to achieve a sealing effect when the cap is closed by Vial. The Cap with a center hole can facilitate sample injection without leaking reagents. The function of magnetism is to better fit the autosampler.

Aijiren’s Septa made of high-quality raw materials can protect the seal inside the Vial to a certain extent, and will not break or fall off the cap after the automatic injection needle is punctured. This is to a large extent. Gas chromatography experiments provide convenience, and bring safe and accurate results.

In order to produce 9mm closures, Aijiren purchased brand new automatic production equipment, such as septa production machines and Cap production machines, and Aijiren can also automate the assembly of Cap and Septa, and realize the pre-cutting machines for Septa, all of which are available in the Aijiren factory of.

Aijiren’s PTFE syringe filter housing is made of high-quality polypropylene (PP) with high mechanical strength and good chemical compatibility. The filter membrane is made of hydrophobic polytetrafluoroethylene (PTFE). No binders or additives are used, and there is little interference with the analysis. Teflon syringe filters are widely used in laboratories. It does not require membrane replacement and filter cleaning, eliminating complicated and time-consuming preparations. PTFE Syringe Filter is mainly used for sample pre-filtration, clarification and removal of particulate matter, and sterilization and filtration of liquids and gases. HPLC and GC are the preferred methods for small samples.

The standard sample vials for GC and HPLC have a 9mm opening to facilitate sample storage. It can be used with 9mm Closures. There are different colors of open cover, solid cover and a variety of septa suitable for different applications for customers to choose. Aijiren produces Closures in a clean room. It is Aijiren’s efforts to ensure the high quality of 9mm Closures and 9mm hplc vial.

Aijiren’s popular product, Headspace Vial, has two types: Screw Neck and Crimp Neck. The worker in the picture is packing the headspace Vial after it has been produced. After labeling the product, an outer packaging is required. This is multi-layered packaging. It can absorb shock to prevent Headspace Vial from being damaged due to bumps during transportation.

The workers of Aijiren in the picture are packaging the Micro-Insert. This kind of Micro-Insert is usually suitable for Autosampler Vial. For the Autosampler Vial of 9mm, 10mm, 11mm caliber, the capacity is 300ul, and the outer diameter is 5 or 6mm micro-insert. Both can be adapted, but for Autosampler vials with a diameter of 8mm, only micro-inserts with an outer diameter of 5mm can be used.

9mm Screw Neck Closures-Polypropylene Screw Cap with two-layer material compound Septa can provide anti-evaporation seal. The double layer includes Silicone and PTFE. This compounded Septa can be used for multiple injections. And it is matched with a PTFE lined screw cap for organic samples. The screw cap provides an inert, air-tight seal and the use of a syringe needle to directly penetrate the sample.

How to choose a precise syringe filter: Aijiren disposable syringe filters come in many types. There are mainly two series, one is hydrophilic and the other is hydrophobic series. The syringe filter has two diameters: 13mm and 25mm. The pore size of the filter membrane is 0.22, 0.45um. Membrane materials include: RC, nylon, PVDF, PTFE, etc. It is important for customers to choose the right membrane.

Aijiren’s septa for 24mm screw closures uses natural-color Silicone and PTFE. These Septas have a diameter of 22mm and a thickness of 3mm, which are consistent with the size of the Cap and can be placed between the Vial and the Cap to isolate the air and the sample. The size is 3mm. The thickness is also very suitable for needle piercing. The material of Septa is soft and tough, not easily deformed and will not break.

Aijiren’s butyl and PTFE composite Septa is often used in 20mm Aluminum Crimp Cap. This combination of Closures is suitable for 20mm crimp headspace vials. The 3mm thickness of Septa is convenient for sealing and will not be damaged by puncture. The sampling head. As a factory direct sale, Aijiren saves you the accumulated sales cost of middle-level distributors. The price is more competitive and its own technical advantages provide reliable quality assurance for each batch of products shipped out of the factory, so that customers can use it more assured.

Autosampler vial kit package
100pcs autosampler vials
+ 100pcs caps (screw caps / crimp caps / snap caps)
+ 100pcs septa ( ptfe/silicone / ptfe/silicone/ptfe or preslit septa)
New Package for safer shippment, lower damage rate

The 18mm magnetic screw cap is easy to use and does not require any additional tools, such as a capper and an opener. Samples can be transferred on site, no need to transfer samples in the laboratory. The precision thread ensures the air tightness between the Headspace Vial and the 18mm magnetic screw cap. Magnetic nut can be widely used in various SPME and headspace analysis.

Aijiren’s 20mm headspace vial is a popular product of Aijiren, and its corresponding Aluminum Cap with PTFE/Silicone Septa is also a popular product of Aijiren. It is precisely because of Aijiren’s excellent quality and favorable price that Aijiren has become the most well-known chromatography in China. One of the manufacturers of consumables.

Aijiren is a professional supplier of chromatography consumables. Aijiren not only provides 20mm Crimp Top Closures, but also provides matching Headspace Vial, Hand Crimper and Decrimper. The 20mm Crimp Top Closures has a strong sealing performance, and the combination of rubber and PTFE makes Closures have better sealing performance and is very convenient for automatic injection needle puncture. Aijiren has 20 years of experience in producing gas chromatography consumables. The high-quality products and strict review system have made Aijiren successful until now.

There are two types of packaging for 20mm Crimp Top Closures produced by Aijiren, one is packaged in plastic bags, the other is packaged in threaded plastic cans, and the quantity is 100 per bag/can. Aijiren is packaged in cans. Because 20mm Crimp Top Closures are easily squeezed and deformed during transportation, which affects the sealing effect in the experiment, they are packed in cans.

Aijiren is a professional manufacturer specializing in the production of Autosampler Vials, Headspace Vials, Reagent Bottle, Syringe Fiter, etc. The production method adopted by Aijiren is fully automated mechanical production, which ensures that every vias undergoes strict inspection and conforms to ISO standard. The picture shows the packaging workshop of Aijiren. The produced Vias will be packed in boxes and waiting for shipment in the packaging workshop.

Aijiren has produced 24mm Screw Neck Closures for more than 20 years. From Cap processing to Septa production, all are produced by fully automated machinery. Aijiren promises to use dust-free workshops to produce Screw Closures to ensure the cleanliness and high quality of the products.

The septa produced by Aijiren uses high-quality raw materials. The raw materials are softened and heated into a mold into a shape with the same size and size. Then, a unique process is used to combine Silicone and PTFE, and finally cut and cut into a size suitable for Vial. . Aijiren, as a rubber factory, has enough experience and strength for Septa’s quality assurance.