Package of HPLC Vials

The staff in the picture is plastic-sealing the packaged 9mm hplc vials. Generally speaking, 9mm hplc vials is 100 pcs/pack. Aijiren will first put the finished 9mm hplc vials in the box, and then plastic-encapsulate it to prevent dust and moisture. This will ensure that Vial is clean and tidy. Aijiren, as a manufacturing company, is inspiring to allow customers to use the preferential and practical 9mm hplc vials.

The special packaging used in the 2ml vial in the picture, 100pcs in a box with a partition to separate the vial. This kind of packaging is not only more compact and beautiful, but also can better alleviate the vibrations that occur during transportation and protect the vial. At the same time, it can also bring the brand logo printed on the box, Aijiren can meet the customer’s packaging customization plan, only need to communicate the details in place and pay the corresponding packaging costs.

20mm PTFE Septa can overcome the degradation that occurs due to long-term high temperature, because it is very common in silicone rubber septa. Degradation causes baseline drift and extra peaks. Therefore, the 20mm PTFE Septa produced by Aijiren is usually fixed with the PTFE side facing the column packing. For most GC/MS and other high-sensitivity detectors, Aijiren recommends septa materials with the PTFE logo; these are the cleanest and highest performing products. The PTFE septum contains very low levels of contaminants, which minimizes interference with the analysis and guarantees excellent results on all major LC/MS and GC/MS instruments.

The packaging of Sample Storage Vial produced by Aijiren uses PP Box, 100pcs is a box, Aijiren’s minimum order quantity is generally 10 boxes, because the order of too small quantity will cause the volume of the vial to be larger, and the shipping cost is more expensive than the product price. In order to avoid this situation, Aijiren set the sample storage Vial’s minimum order quantity to 10 boxes.

Aijiren presses Silicone and PTFE composite into the picture, and cuts them into rectangular sheets of similar size. Because PTFE is easy to curl and deform, the raw materials in the picture are all curled. Wait for it to enter the dryer to dry the moisture. Keep it level. Aijiren uses a mechanical laser to cut Septa, and guarantees the integrity and chemical nature of Septa.

As a factory specializing in the production of chromatographic consumables, Aijiren has hundreds of workers for production, especially Septa. Aijiren has exclusive septa composite technology, so the requirements for the workers in the septa workshop are very high. The workers in the picture are using cutting machines for Silicone and PTFE composite material for cutting work.

Aijiren has its own production workshop. In order to ensure the cleanliness of the inside of the production workshop, Aijiren has established a sanitary standard for a dust-free workshop. Employees entering the workshop need to change into uniforms. Before entering the workshop, dust must be removed inside the dust removal bellows to ensure Without bringing external dust into the workshop, the staff of Aijiren in the picture removes dust in front of the dust removal bellows.

Aijiren provides Cap customization services. Customers can customize Cap according to their own experimental needs. As long as Aijiren can provide them, Aijiren will try to provide customized services. Today, Aijiren is already a well-known supplier of chromatography consumables in China. Aijiren will continue to work hard to improve itself, broaden its product line, and maintain high-quality production.

Aijiren has always insisted on using high-quality glass, because only the quality of the glass is high enough to be compatible with more samples and more convenient for customers to experiment. Therefore, Aijiren decided on borosilicate glass after various comparisons. This glass is not only resistant to high temperature and corrosion It is also inert and not easily broken, which is very suitable for large-capacity 60ml sample storage vial.

The 24mm Screw Cap produced by Aijiren is often paired with 24mm Sample Storage Vial. This type of Vial is used to store samples and sometimes used in autosamplers. For example, 40ml Vial is often called EPA Vial, and the center hole on the Cap is here. It will be useful in time, the sampling tool can easily pierce through the septa for sampling without causing sample contamination.

Aijiren’s sample storage vials are produced by fully automated machinery. This production method is efficient and consistent in specifications, and it is not easy to make errors. The packaging is a PP box, 100pcs is a box for packaging, the customer should purchase according to the box when purchasing, the minimum order quantity of Aijiren is 10 boxes.

Threaded storage vials have excellent chemical stability, colorless and brown are available, and have excellent sealing and corrosion resistance. This series of products are designed and produced in accordance with the requirements of the US EPA, with good storage properties. The septum and plastic cap are combined together to avoid excessive evaporation and keep the sample vial properly sealed.

Aijiren’s 2ml hplc vial is suitable for most autosamplers, because this 2ml hplc vial has a standard thread/snap/crimp caliber pattern and a uniform shoulder distance, which is very convenient for the robot arm of the autosampler to grab it. As shown in the picture, Aijiren will prepare PP Boxes for Vial in advance, and wait for Vial’s production or printing before packaging and shipping.

Aijiren¡¯s 9mm Screw Thread is short, and can be sealed with a slight rotation. The shoulder and neck lines are also very convenient for the autosampler to grab, and it is not easy to slip off. The vial can also customize the logo and whether it has a writing area. Aijiren will continue to make efforts for the convenience of the laboratory.

When Aijiren produces screw top hplc vial, it will produce matching screw neck PP Cap, and different calibers and different types of vial require different Caps. In this case, new molds need to be polished for Cap production. The worker in the picture is here. For the grinding of the new mold, only the use of a suitable mold to install on an automated production machine can mass produce a suitable PP Screw Neck Cap.

Aijiren’s 9mm Autosampler Vial, Screw Threads neck fits perfectly with Closures, and the thread seal is also convenient for customers to operate. This type of vial is a hot selling model that can be applied to all models of Autosampler.

The picture is one of Aijiren’s production plants. It can be seen that each of Aijiren’s workshops has a large space, which can accommodate a large number of production machines and the storage of raw materials and finished products. The right side of the picture is the adhesive-free composite of Silicone and PTFE. The Septa raw materials are placed on the shelves.

PTFE/silicone septa are most commonly used in HPLC applications, and pre-cut septa are easier to pierce with a needle. The cap color is generally black, but other special colors can also be produced accordingly. Easy to apply and easy to remove. Pre-installed caps and septa are very convenient. Aijiren 13mm Screw Closures are commonly used in 4ml Screw Top HPLC Vial. Aijiren can recommend the most suitable Closures for your HPLC Vial.

Aijiren is a manufacturing enterprise with its own production machines and production lines. Customers can customize Vial and Closures according to their own needs, such as logo customization, capacity selection, solid or center hole Cap, septa selection, etc. And so on, because of these exclusive customized services, Aijiren can become a professional and satisfied customer supplier of chromatography consumables.

The staff in the picture is disassembling the assembled 9mm Screw Neck Cap with Septa. These are 9mm Screw Neck Closures randomly selected from different machines. Since Aijiren produces more machines, many samples need to be checked. Solution to check whether Septa and Cap are damaged, if they are not sturdy, Septa may fall off or fall off easily. Aijiren’s strict quality inspection guarantees the quality of the product.

The Septa produced by Aijiren is suitable for Autosampler Vials. Septa is to help Autosampler Vials to seal. The design of Cap with Septa facilitates the sampling of autosamplers. Aijiren, as a manufacturing enterprise, also requires Autosampler Vial accessories, Cap with Septa. It is produced carefully, using first-class equipment and exclusive craftsmanship. In the picture, Septa is drying.

Aijiren currently cooperates with Turkey, Bangladesh, India, the United States, the United Kingdom, Italy, France, etc. 2ml HPLC Vial is often used in chromatographic analysis experiments. The 2ml hplc vial produced by Aijiren can match most chromatographic analysis instruments, including gas chromatography. You can also use 2ml hplc vial.

In addition to producing Autosampler Vial, Aijiren is also rich in matching Caps. Usually Caps are made of high-quality polypropylene for use in automatic sample injection vials. Aijiren uses a unified standard to produce PP Caps in an assembly line project to ensure that the Cap lines between batches are consistent and there is no difference. It is convenient for the customer’s laboratory sampling operation.

Aijiren’s I type transparent EPA storage glass vial is used for various analysis, sample, extraction and standard storage. , Bottle with PP fixed or open top cap. The fixed top cap is lined with fluoropolymer resin. The open top cap has an ultrasonically bonded 3.1mm fluoropolymer resin/silicone diaphragm for volatile organic compounds analysis.

The PTFE layer of Aijiren’s 20mm PTFE Septa composite diaphragm is in contact with the reagent. It is chemically inert, resistant to acids, alkalis, temperature and adhesion. Even at high temperatures, it cannot work with concentrated acids, alkalis or strong oxidants. At the same time, the elasticity of the silicone rubber or silicone layer can ensure the sealing performance; Aijiren abides by strict production management to ensure the quality of the product. The product is clean and can be used directly without washing.

Aijiren Technologies is one of the leading manufacturers of automatic sample and hplc glass bottles for USP 1-type glass based in China. We are an ISO 9001:2000-tested company, and the company is also listed. Aijiren has export markets in the United States, the United Kingdom, Germany, Jordan, Iran, Ejitep, Nepal, Thailand, Indonesia, Malaysia and Australia.
In addition to producing HPLC Vials in accordance with ISO standards, Aijiren also manufactures HPLC Vials customized to customer-specific requirements. Our research and development department has been working hard to broaden its product line and develop more products that will make it more comfortable for our customers to buy laboratory supplies.

Aijiren has more than ten years of production experience. Workers, test managers, and product development managers have rich experience in chromatography consumables. Aijiren has become one of the well-known manufacturers of chromatography consumables in China. Providing services in more than 200 countries and regions in the world, Aijiren will do better and work hard.

Aijiren has strict production requirements, meets ISO9001 certification, and the quality of the 2ml amber vial’s raw materials is high, which can protect light-sensitive samples from deterioration due to UV interference.

Aijiren is a professional manufacturer of products such as Headspace Vials, which are large-capacity laboratory Vials. The capacity of such Vials ranges from 6ml-20ml. Generally, they are more commonly used for gas chromatography. This type of experiment requires heating the Headsapce Vials and the liquid held in it, and detecting the evaporated gas above the Vials, so the sealing performance of Headsapce Vials is required to be high.

Aijiren is a manufacturer of chromatography consumables specializing in the production of glass products. Its products include Autosampler Vials, Headspace Vials, Sample Storage Vials, EPA Vials, COD Test Tubes, etc. High-quality glass products ensure that customers can analyze more conveniently Experiment.