Pack of Autosampler Vial

Aijiren has more than ten years of production experience. Workers, test managers, and product development managers have rich experience in chromatography consumables. Aijiren has become one of the well-known manufacturers of chromatography consumables in China. Providing services in more than 200 countries and regions in the world, Aijiren will do better and work hard.

Aijiren can merge septa and cap, and before the merger, the machine can automatically identify the front and back of septa, silicone and PTFE surface, choose to fix the PTFE side up into the Cap, fully automated production saves a lot of manpower, Aijiren Be able to invest more talents in quality inspection and product development.

The worker of Aijiren shown in the picture is inserting a 22mm Silicone/PTFE Septa into a 24mm Screw neck Cap. The worker wears finger cots and holds a tool to press harder to consolidate the tightness of the Cap and Septa. Since Aijiren’s automated merging of Cap and Septa machines is only suitable for the closure of 2ml autosampler vial, this large-volume closure requires manual combination by workers. Aijiren uses a dust-free workshop for production and packaging, so customers can be completely assured of hygiene issues.

Aijiren¡¯s 9mm Screw Thread is short, and can be sealed with a slight rotation. The shoulder and neck lines are also very convenient for the autosampler to grab, and it is not easy to slip off. The vial can also customize the logo and whether it has a writing area. Aijiren will continue to make efforts for the convenience of the laboratory.

Threaded storage vials have excellent chemical stability, colorless and brown are available, and have excellent sealing and corrosion resistance. This series of products are designed and produced in accordance with the requirements of the US EPA, with good storage properties. The septum and plastic cap are combined together to avoid excessive evaporation and keep the sample vial properly sealed.

Aijiren uses Silicone and PTFE to produce Septa suitable for Autosampler Vial. Aijiren will compound PTFE and Silicone together in a binder-free compounding method. This Septa is softer and suitable for automatic injection needle puncture. Before laser cutting, there is a process, which is to dry in the dryer to dry the moisture in the raw materials, so as to ensure the texture and application of Septa.

Aijiren’s factory is established in Quzhou, Zhejiang, which is close to the river and developed by land and water. Usually, Aijiren will notify the relevant freight forwarding company to pick up and deliver the goods after the production is completed. Generally speaking, the shipment can be completed within 3 days after the production is completed. , The next step is the time for water transportation. If the demand is not particularly large, then customers can consider express or air freight, which will be faster.

Aijiren’s septa can choose whether to have pre-slit or not. The pre-slit pattern is divided into one-shaped and cross-shaped. The septa with pre-slit is better to be pierced, especially for blunt automatic injection needles. , The cross star pre-slit septa can guide the automatic injection needle to accurately enter the vial to suck liquid, and will not deviate from the direction and cause the automatic injection needle to poke on the vial and cause the via to rupture.

Aijiren is a production-oriented enterprise with its own production plant and production workshop. Aijiren is committed to producing Autosampler Vial and its supporting Cap with Septa. Aijiren uses high-quality raw materials to produce Septa. The raw materials are free of impurities and pollution. They are processed in a dust-free workshop. Customers can buy with confidence, Aijiren supports factory inspection, welcome to Aijiren.

Aijiren’s production maintains strict quality control to ensure that the size of each batch of 9mm Screw Closures is consistent. The high-quality production quality inspection has ensured the consistent match between Cap and Septa. The lid is made of high-quality polypropylene with precise manufacturing tolerances. The septum is made of the highest quality material to ensure the normal operation of the auto-injector.

The 24mm Screw Cap produced by Aijiren is often paired with 24mm Sample Storage Vial. This type of Vial is used to store samples and sometimes used in autosamplers. For example, 40ml Vial is often called EPA Vial, and the center hole on the Cap is here. It will be useful in time, the sampling tool can easily pierce through the septa for sampling without causing sample contamination.

Aijiren produces headspace vials for the convenience of gas chromatographic analysis. Gas chromatographic analysis requires heating and other methods to vaporize the liquid in the vial and extract gas for detection and analysis through an automatic injection needle. Gas chromatograph requires the vial to have good airtightness and heat resistance. With strong stability and large capacity, the crimp top headspace vials produced by Aijiren perfectly meet these conditions.

The packaging of Sample Storage Vial produced by Aijiren uses PP Box, 100pcs is a box, Aijiren’s minimum order quantity is generally 10 boxes, because the order of too small quantity will cause the volume of the vial to be larger, and the shipping cost is more expensive than the product price. In order to avoid this situation, Aijiren set the sample storage Vial’s minimum order quantity to 10 boxes.

Aijiren is a manufacturer of chromatography consumables specializing in the production of glass products. Its products include Autosampler Vials, Headspace Vials, Sample Storage Vials, EPA Vials, COD Test Tubes, etc. High-quality glass products ensure that customers can analyze more conveniently Experiment.

20mm PTFE Septa can overcome the degradation that occurs due to long-term high temperature, because it is very common in silicone rubber septa. Degradation causes baseline drift and extra peaks. Therefore, the 20mm PTFE Septa produced by Aijiren is usually fixed with the PTFE side facing the column packing. For most GC/MS and other high-sensitivity detectors, Aijiren recommends septa materials with the PTFE logo; these are the cleanest and highest performing products. The PTFE septum contains very low levels of contaminants, which minimizes interference with the analysis and guarantees excellent results on all major LC/MS and GC/MS instruments.

The 9mm Screw Closures produced by Aijiren have many advantages such as high quality, strong adaptability, resistance to cracking, high temperature resistance, chemical resistance, etc. Since 9mm Screw Closures have many different styles and materials, the demand for 9mm Screw Closures is very high. High and diversified options also allow customers multiple choices.

Septa-silica gel has strong repetitive sealability, and it can maintain good close performance after multiple injections; PTFE is a material with better chemical conditions at present, and it can withstand strong acids and alkalis. The two materials After compounding, the bottle can be used for various laboratory purposes such as sealed sampling, chemical storage and so on.

The staff in the picture is disassembling the assembled 9mm Screw Neck Cap with Septa. These are 9mm Screw Neck Closures randomly selected from different machines. Since Aijiren produces more machines, many samples need to be checked. Solution to check whether Septa and Cap are damaged, if they are not sturdy, Septa may fall off or fall off easily. Aijiren’s strict quality inspection guarantees the quality of the product.

The Septa produced by Aijiren is suitable for Autosampler Vials. Septa is to help Autosampler Vials to seal. The design of Cap with Septa facilitates the sampling of autosamplers. Aijiren, as a manufacturing enterprise, also requires Autosampler Vial accessories, Cap with Septa. It is produced carefully, using first-class equipment and exclusive craftsmanship. In the picture, Septa is drying.

The 9mm amber vial produced by Aijiren has high quality and favorable price. Aijiren has its own factory, which can meet the customized needs of customers. Aijiren’s 9mm amber vial is often used in autosamplers and can be adapted to most brands on the market. Autosampler. 9mm amber vial is a popular product of Aijiren.

PTFE/silicone septa are most commonly used in HPLC applications, and pre-cut septa are easier to pierce with a needle. The cap color is generally black, but other special colors can also be produced accordingly. Easy to apply and easy to remove. Pre-installed caps and septa are very convenient. Aijiren 13mm Screw Closures are commonly used in 4ml Screw Top HPLC Vial. Aijiren can recommend the most suitable Closures for your HPLC Vial.

Aijiren adopts the latest production technology. The fully automated production line can meet mass production. Sample Storage Vial has undergone strict quality inspection during production. Any vial that fails the quality inspection will be returned for reprocessing. Aijiren has its own quality inspection. The system and design laboratory will always strive to bring more updated products and better product experience to customers.

Aijiren offers a variety of sizes and styles of containers, including the popular 40mL autosampler vials. Sample Storage Vial can be used as: Sampling and storage containers, sample vial compatible with autosampler, culture tube, TOC test, USP Method 643 test, Capture high-purity water offline, Store verification standards.

When Aijiren produces screw top hplc vial, it will produce matching screw neck PP Cap, and different calibers and different types of vial require different Caps. In this case, new molds need to be polished for Cap production. The worker in the picture is here. For the grinding of the new mold, only the use of a suitable mold to install on an automated production machine can mass produce a suitable PP Screw Neck Cap.

Aijiren is a factory specializing in the production of Autosampler Vials, with professional production machinery and equipment and large-scale production factories. It is precisely because of such a strong production base that Aijiren can guarantee the production of large quantities of products. Aijiren has a considerable number of products in stock. The operation of multiple production lines also ensures the timeliness of customer orders.

The Silicone/PTFE Septa produced by Aijiren uses high-quality raw materials and an exclusive compounding process. This process does not require any adhesives to compound Septa and Silicone to achieve no cracking, no falling off, and a perfect fit for autosampler vial and antosampler.

The Aijiren staff in the picture is using a vernier caliper to detect 2ml HPL Vials. The thread of the amber glass hplc vial in the picture is the type of screw neck. This type of threaded hplc vial is very convenient for sealing and storage, and it is easy to operate. Autosampler Vials is the first choice of many customers. Secondly, the amber glass can avoid ultraviolet rays and protect the samples. Staff needs to check whether the specifications meet the standards, and need to check the production status of the glass texture.

The special packaging used in the 2ml vial in the picture, 100pcs in a box with a partition to separate the vial. This kind of packaging is not only more compact and beautiful, but also can better alleviate the vibrations that occur during transportation and protect the vial. At the same time, it can also bring the brand logo printed on the box, Aijiren can meet the customer’s packaging customization plan, only need to communicate the details in place and pay the corresponding packaging costs.

Aijiren uses PP Boxes for packaging. Generally, Aijiren uses 100pcs/pack, and the box has strong anti-impact ability. It is not easy to cause the vial to break during transportation. Aijiren’s 2ml hplc Vial has three different calibers to choose from. Screw, crimp and snap, the openings are divided into 8mm-11mm, many types are convenient for customers to choose.

Bule, white, red ptfe material
white, natural silicone material
Sufficient materials for makeing vial septa
Aijiren is professional vial septa maker for hplc gcms vials, sample vials