2ml screw vial

Chromatography autosampler vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling. Its basic requirements are accurate volume, ability to withstand a certain pressure, good sealing performance, and no adsorption to samples.

Aijiren¡¯s 9mm Screw Thread is short, and can be sealed with a slight rotation. The shoulder and neck lines are also very convenient for the autosampler to grab, and it is not easy to slip off. The vial can also customize the logo and whether it has a writing area. Aijiren will continue to make efforts for the convenience of the laboratory.

9mm Wide Opening Amber Glass Screw MS Certified Vial Convenience Kits are fully lot-tested by multiple methods for 15 critical parameters. Every pack comes with a Certificate of Conformance. Manufactured from superior quality 33 expansion borosilicate clear (Type 1, Class A) glass, vials are available in assembled and unassembled kits. An assortment of wide opening 9mm vials and a selection of closures are available to suit your application.

Aijiren 9mm vials may be used with robotic autosamplers in place of crimp style vials. 9mm Vials have a 40% larger opening for easier sample preparation. Aijiren 9mm vials must be used with 9mm, StepVial II closures to ensure proper fit and functionality.

The dimensions for 12x32mm vials are standard between manufacturers but the length of the neck and width/shape of the vial shoulder may vary. 12x32mm microvials have the same outer dimensions but the inside of the vial may be tapered to reduce volume or contain a fused insert. 12x32mm high recovery vials will have an internal conical bottom.

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative Aijiren 9mm closures and Aijiren 9mm screw top vials for consistent productivity on every separation.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials.

screw vials are also available in different sizes, and the cap is made of PP for sealing. The glass vial has a maximum capacity of 2ml and has a screw cap. The insert can be used with any autosampler and fits standard or wide-mouth vials.

The transparent glass threaded sample bottle is 2mL, 12x32mm, and has an advanced sample bottle sealing system. The screw vial can prevent the septum from being pressed in, and can provide a stop point for the bottle cap to prevent over-tightening or over-tightening, and it can provide the best and consistent seal every time.

The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Glass Screw Top Autosampler Vials, the product material is of paramount importance.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Screw thread closures?N9?(9mm)?2ml vials and closures?are?universally suitable?on most autosamplers,?convenient?in handling and available in a broad?selection of different cap colors and septum materials. They?fulfill all requirements with regard to?tightness?and?analytical?purity?for GC as well as for HPLC. Due to the relatively thin?septa penetration is safe and easy.

Screw thread vials and caps provide low evaporation, reusability, less hand injury during manipulation than crimp seals and require no special tools. All screw threads vials and caps are differentiated by their thread finish as defined by the Glass Packaging Institute, GPI. For screw thread vials, a two part number is assigned. For example, 8-425 neck finish represents a vial with a diameter of 8 mm across the outside of the threads and a thread style of 425. Screw thread vials and caps are more expensive than crimp seals.

Clear Glass Screw Thread Vials are 2mL, 12x32mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Glass vials are available in 2 ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Aijiren’s 9mm HPLC Vial is packaged in 2-in-1, and vial uses boxes for packaging. Customers can choose cartons and plastic boxes for packaging, 100pcs/box. The cap is packed in plastic sealed bags, 100 pcs/pack. Aijiren will use a carton for packaging on the outside, and then use plastic film to wrap the carton to prevent moisture and moisture.

High quality Aijiren 9mm glass vial for HPLC/GC analysis. Amber glass makes it compatible with sunscreen samples. 0.3 ml clear glass micro insert can be fixed in a 2ml 9-425 amber glass vial. The size of the insert bottle is 6 * 29mm. The vial is compatible with all types of 9-425 bottle caps, with a 9mm wide opening screw top, which can better perform syringe injection.

Our 9 mm wide mouth vials and caps are our recommended screw bottles. These vials are compatible with autosamplers and have an opening 40% larger than 8-425 threaded vials, simplifying pipetting and other routine functions. Aijiren Tech provides 9mm clear glass bottles and amber glass bottles, as well as polymer options and qualified glass bottles.

The size of 2ml 8mm Clear Glass Vial is 12 x 32mm. The precise handling of the bottleneck enables the robot arm to operate efficiently. The 2ml 8mm Clear Glass Vial has an opening 40% larger than the standard narrow-mouthed vial to prevent problems with the syringe. The special thread design ensures a consistent seal.

2ml HPLC Vials in 8mm is a 12×32 vial with a standard opening. The vial is made of amber I type B grade borosilicate glass. The vial has a standard graduated writable patch, which can easily fill and identify the sample. An 8-425 bottle cap is required. And 8mm septum. Please check the assembled cap and septum.

2ml 8-425 screw cap and vial are usually used in combination with WATERS autosampler. The sample bottle is made of transparent type A type 1 A or amber type B type B clear glass, and contains a paste for sample identification The label and bottle cap are made of high-quality polypropylene with precise manufacturing tolerances and are lined in a controlled manufacturing environment.

Many laboratories use 9mm threaded vials, which expand the opening while still being compatible with the autosampler, and the 9mm thread is shorter, and the sealing time will be greatly shortened. The 9mm screw vial is compatible with most autosamplers on the market.

Aijiren 9mm hplc vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials. Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml for consistent productivity on every separation.

Aijiren’s 9mm Screw Thread Vial has a specification of 11.6*32mm. You can choose 5.0type and 7.0type, and you can also choose clear and amber colors, or you can choose with or without label area. Aijiren provides customized services. Customers can customize logo printing.

Clear vial, 33 Expansion borosilicate glass USP Type I, Class A. Amber vial, 51 Expansion borosilicate glass USP Type I, Class B. Graduated write-on marking spot area, measures 0.5, 1.0 and 1.5ml. Strictly quality control to ensure the consistent size of each lot of items. The ever flat-bottomed guarantee consistent matching between vials and truly neck 8mm for Standard Glass insert.

8-425 screw-thread vials are the original, standard opening vials. Vials are manufactured of Clear, Type I Class A or Amber, Type I Class B borosilicate glass. Vials have a standard graduated write-on patch for easy filling and identification of sample. Require the use of 8-425 closures and 8mm septa. Please see assembled caps and septa.

9mm 2mL amber glass spiral top autosampler vials are available in a variety of neckwear and opening diameters. The caliber of large-caliber or wide-inner-diameter sample bottles is 40% larger than that of standard-caliber sample bottles. The larger opening reduces the risk of the autosampler needle being bent during sampling. Aijiren’s 2mL amber glass screw-top autosampler vials are all 5.0 type borosilicate glass.

The high recovery glass vials produced by Aijiren are often used when the remaining amount of the reagents to be tested is not large or the substances to be tested are precious. The thickened bottom of the bottle reduces the possibility of sample remaining at the bottom of the bottle.

The 2ml glass hplc vial produced by Aijiren has a white pp cap. The white pp cap ensures the tightness of the thread seal. The center hole on the cap also ensures the stability and accuracy of the sampling of the automatic injection needle.

Aijiren’s HPLC Vial is divided into two types: clear glass and amber glass. The clarity of clear glass is more obvious. The reagent changes in the vial can be clearly seen. The amber glass can protect the sample in the vial from deterioration due to ultraviolet radiation.

The label area of 2ml Clear Glass HPLC Vial is very useful. For example, when a control experiment is needed, different reagents need to be stored in the same 2ml Clear Glass HPLC Vial. At this time, you need to mark the label area to distinguish Two bottles of reagents. Generally speaking, the label area also has a scale, which can show the liquid level in the vial.

Aijiren’s 9mm Screw Top Vial has very strict production standards. During production, the factory’s inspection department will select unqualified vials very strictly. From production to packaging to transportation, Aijiren will work hard to ensure that customers take every step. The products obtained are of high quality.

When Aijiren produces two-ml screw vials, they use the same mold for production. Strict quality control ensures that the specifications of the vials are exactly the same in the same batch, and the impact on the experimental results is minimized.

Aijiren’s 2ml 9mm Screw Top Vial is made of borosilicate hydrochloric acid glass. This glass has high inertness and is not easy to react with chemical substances. At the same time, this glass is also resistant to high temperatures and can remain stable when heated.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Screw-top Vials and caps are easy to use and require no special tools. The unique thread design provides a consistently secure seal, preventing evaporation. Screw Thread Vials are available in 8-425 (8mm) neck finishes.

Clear Glass Screw Thread Vials are 2mL, 12x32mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.

Our 9 mm Wide Mouth Vials and Closures are our recommended screw thread vials. These vials are autosampler compatible and offer a 40% larger opening than 8-425 thread vials, simplifying pipetting and other routine functions. Aijiren Tech offers 9 mm screw thread vials in clear and amber glass, as well as polymeric options and mass spec quality glass.

HPLC Vials 10-425 1.5ml Screw Vials. Wide-opening vials provide an increased target area for easier sample preparation and to reduce the chance of bent or broken needles during samplingr. Vials are manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B borosilicate glass . Requires the use of 10-425 screw thread closures and 10mm septa.

Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersability of materials, allowing you an unhindered view of the solution. Our vials come in 2 ml. Each pack contains 100 glass vials, along with 100 caps lined with septa.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Amber glass vials are available in 2ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

The specifications of the vials are 12 x 32 mm.
Accurate handling of bottlenecks to enable the mechanical arm to operate efficiently.
Suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosamplers, and other rotating or robotic arm samplers.
40% larger opening than the standard narrow opening vial prevents syringe problems
The special screw design ensures a consistent seal.

Standard opening 12×32 viale
8-425 screwed vial is the original standard opening vial
Viars are manufactured in clear, type I class A or amber, type I class B borosicate glass
Viars have standard calibrated write patches to facilitate sample filling and identification
The use of 8-425 closures and 8mm septum is required.

Caps are made of high-quality polypropylene to meet accurate manufacturing tolerances and backed in a managed manufacturing environment. The color of the cap is only black. The septum uses only the highest quality materials to ensure proper function and can be easily penetrated by pre-slits.

8-425 thread caps and viars are often used in combination with Shimadzu, Specra-Physics, Varian, and other autosamplers
The vial is made of transparent type 1 class A or amber, type 1 class B borosicate glass and contains writing patches for sample identification.

2mL amber glass screw top autosempla vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID viale has an opening about 40% wider than the standard opening vial. Large openings reduce the risk of the autosampler needle bending during sampling. When selecting a 2mL amber glass screw top autosan pravisal, the material of the product is the most important.

The 10-425 vial was the original wide mouth to replace the 8-425 screw vial. Today, it is recommended to use a 9mm wide-mouth screw thread vial. This is because it is more versatile and compatible with autosamplers without sacrificing a wide mouth for pipette operation.

The wide open vial expands the target area to facilitate sample preparation and reduce the possibility of needle bends or breaks during sampling.
Viars are manufactured in clear, type 1 class A or amber, type 1 class B borosicate glass
10-425 screw fasteners and 10mm septum must be used.

Aijiren 10mm wide opening screw vial 2mL, 12x32mm 10mm wide opening screw vial and insert. 10-425 thread finish. The vial has a calibrated write patch that is useful for identifying samples. The neck opening is wide and easy to fill.

Some analysis systems use their own processes and components to optimize performance. As a result, fitting the sample vial to the analysis system will completely affect the quality of the expected results. The Aijiren 2ml 9mm HPLC vial has been tested many times and is fully compatible with popular commercially available chromatography analytical instruments.

In the field of experimental consumables, glassware consumables account for 86%. Reagent bottles are widely used for reagent storage and transport, accounting for only 32% of the final glassware. 2ml HPLC vials are widely used in chromatography, accounting for 54% of glassware consumables. This shows that the demand for the 2ml HPLC vial market is very large.

Aijiren Clear 8-425 HPLC Sample Vial, Clear Type 1 Class A, Amber 8-425 HPLC Sample Vial is manufactured in Type 1 Class B Borosilicate Glass, sample identification, measurement values 0.5, 1.0 and 1.5 ml. Consistency between the vial and the true neck 6mm of the standard glass insert is always guaranteed.

The 9mm screw neck vial is the 9mm screw neck vial, which has the highest sales volume among Aijiren’s HPLC vials, because it can be used with most autosamplers on the market. In addition, the 9mm screw neck vial has a wide mouth and is convenient for automatic injection. Needle for pulling samples.

2ml clear crimp top hplc autosampler vial is made of borosilicate glass. Comparing with 2ml amber crimp headspace vial, the 2ml clear crimp top hplc autosampler vial should be made by special process. The appearance of a clear and transparent 2ml crimp top sample hplc vial has attracted widespread attention. 2ml clear crimp top hplc autosampler vial is made by adding UV-absorbed metal oxides to the glass, while using the complementary effect of color, and then adding certain metals or their oxides to fade the colored glass. So in theory, the 2ml clear crimp top HPLC autosampler vial is a little expensive than Amber autosampler vial.

Amber Glass 8-425 is often used to contain light-sensitive samples. The high-quality borosilicate hydrochloric acid glass used by Aijiren ensures that 8-425 Glass Vial has strong high temperature and low temperature resistance, strong corrosion resistance, and can guarantee maximum damage A chemical reaction occurs with the sample. Aijiren provides logo customization service, you can customize your exclusive logo in the Write-on Area area.

Let me introduce the material of 8-425 2ml autosampler vials, 33 Expansion borosilicate glass USP Type I Class A made of clear vial, or 51 Expansion borosilicate glass USP Type I, Class B made of Amber vial.Our glass uses neutral borosilicate and low borosilicate, but our neutral borosilicate can reach the standard of high borosilicate, and our low borosilicate can reach the standard of neutral borosilicate. We use excellent raw materials to make 8-425 2ml autosampler vials.

Aijiren is one of the largest 2ml 9mm sample vial with screw cap manufacturer in south of China, which supply 2ml 9mm screw HPLC vial in wholesale price. The screw 9mm HPLC sample vial meet or exceed OEM specifications to ensure autosampler compatibility. 2ml 9mm sample vial compatible with Perkinelmer.

2ml 9mm sample vial with screw cap is easy to seal. You can seal the screw cap, easily, without any tools. 2ml 9mm sample vial with screw cap’s size is 22.5x46mm. Choose the 2ml sample vial with cap for your PERKIN ELMER autosampler.