2ml 8mm Glass Vial from Aijiren

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage.

Aijiren has been producing 2ml glass autosampler vial since 2009. The glass vials we produce are widely used all over the world. For more than ten years, our customers are in more than 70 countries and regions. Our 2mlvial is also well received by customers. Aijiren’s customer service and product quality are among the best in laboratory consumables.

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.
The vial cap is made of high-quality polypropylene, with precise manufacturing tolerances and a controllable manufacturing environment. The gasket is made of the highest quality PTFE/silicone to ensure the high efficiency of the function.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum. The bottle cap is made of high-quality polypropylene, and the septum is manufactured with high-quality materials to ensure the efficiency of the function.
Applicable to: Beckman, Diane, Finnigen, Gilson, LKB, Thermoelectric Thermo, Varian Varian, Shimadzu and other autosamplers.

Chromatographic autosampler vials are glass vials used for chromatographic autosampling in liquid chromatographs, gas chromatographs, mass spectrometers and other autosamplers and headspace samplers. Generally consists of a complete set of vial, cap and gasket. Its basic requirements are accurate volume, can withstand a certain pressure, good sealing performance, no adsorption effect on the sample.

Transparent viale, 33-extended borosicate glass USP type I, Class A
Step-by-step write marking spot area, 0.5, 1.0, and 1.5ml
Strict quality control to ensure a consistent size of each lot of items.
Flat bottom to ensure consistent matching between the vial and the true neck 6mm of the standard glass insert.
Caps are made of high-quality polypropylene to meet accurate manufacturing tolerances
Septum is made of the highest quality materials to ensure proper functioning

We provide septa and caps to fit our autosampler crimping the top vial to provide PTFE protection and silicone resealability. The cap includes a double-sided PTFE septum with silicone in the middle.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

The automatic vial is made of high quality raw materials. 2ml Autosampler Vials 8-425 neck finish represents a hplc vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12x32mm.

Aijiren has been engaged in the production of 8-425 HPLC Vial with Caps for more than ten years, we have absolutely rich experience and familiar processes to produce 8-425 HPLC Vial with cap, and we can guarantee the high quality of 8-425 HPLC Vial with Cap produced by Aijiren with reasonable price.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Compared with crimping seals, threaded vials and caps have lower evaporation, reusability, less damage to hands during operation, and no special tools are required. The 8-425 neck mouth represents a vial with a diameter of 8mm. The outer diameter of the thread of the vial is 8mm, and the thread pattern is 425.

Welcome to buy Aijiren 8-425 2ml hplc vial with cap. Aijiren has a large output and can quickly complete the mass production of 2ml hplc vial with cap after you place an order. Aijiren has long-term cooperation with freight forwarders to ensure that you get the goods as soon as possible. To purchase 2ml hplc vial with cap, please choose Aijiren.

Aijiren’s hottest 8-425 2ml Screw HPLC Vial with Cap have been introduced. Aijiren uses high-quality raw materials to make 8-425 2ml Screw Vial with Cap. Customer satisfaction and praise have made Aijiren one of the largest laboratory consumables producers in southern China. First, Aijiren will stick original intention to ensure the quality of 8-425 2ml vial.

If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.

Let me introduce the material of 8-425 2ml autosampler vials, 33 Expansion borosilicate glass USP Type I Class A made of clear vial, or 51 Expansion borosilicate glass USP Type I, Class B made of Amber vial.Our glass uses neutral borosilicate and low borosilicate, but our neutral borosilicate can reach the standard of high borosilicate, and our low borosilicate can reach the standard of neutral borosilicate. We use excellent raw materials to make 8-425 2ml autosampler vials.

Material: Borosilicate glass
Finish Type: Screw Neck
Color: Clear / amber
Size: 11.6*32mm
Cap: Black Polypropylene Cap
Closed-top or with 5.5mm center hole
PTFE/silicone Septa
with pre-slit

The thread design of the 8-425 threaded sample vialcan make the septum achieve extremely strong re-tightness, so this sample vial can also be used as a storage vial, and it can also be used for autosampler. This design sample vial is mostly suitable for Shimadzu Hitachi and other Japanese enterprise instruments.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

The screw top vial design is characterized by general ease of use, especially with autosampling systems, hence the name autosampler vial. The 1.5 ml vials are commonly referred to as 2 ml capacity vials.

Aijiren began to produce Autosampler Vial 20 years ago, which is often used in chromatographic analysis experiments. Aijiren uses machinery for mass production, which ensures the mass production of products. 100 pcs/pack is convenient for customers to use. The design of separate packaging for Vial and Cap. It is convenient for customers to seal after holding Autosampler Vial.

The specifications of the vials are 12 x 32 mm.
Accurate handling of bottlenecks to enable the mechanical arm to operate efficiently.
Suitable for Aijiren, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosamplers, and other rotating or robotic arm samplers.
40% larger opening than the standard narrow opening vial prevents syringe problems
The special screw design ensures a consistent seal.