8-425 1.5ml HPLC Autosampler Vial

If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.

Caps are made of high-quality polypropylene to meet accurate manufacturing tolerances and backed in a managed manufacturing environment. The color of the cap is only black. The septum uses only the highest quality materials to ensure proper function and can be easily penetrated by pre-slits.

Aijiren has been producing 8-425 2ml hplc glass vial for more than ten years. During this decade, Aijiren added new factories and production lines to strictly regulate production standards and processes. Continuous improvement has made Aijiren one of the largest laboratory consumable suppliers in southern China.

Aijiren’s HPLC Vial is divided into two types: clear glass and amber glass. The clarity of clear glass is more obvious. The reagent changes in the vial can be clearly seen. The amber glass can protect the sample in the vial from deterioration due to ultraviolet radiation.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

The 8-425 Screw Cap with Septa for 8mm Vial offers compatibility with a wide range of laboratory applications. They are commonly used in chromatography techniques, such as High-Performance Liquid Chromatography (HPLC). These screw caps are suitable for both routine analysis and research applications, ensuring reliable and reproducible results.

Chromatographic autosampler vials are glass vials used for chromatographic autosampling in liquid chromatographs, gas chromatographs, mass spectrometers and other autosamplers and headspace samplers. Generally consists of a complete set of vial, cap and gasket. Its basic requirements are accurate volume, can withstand a certain pressure, good sealing performance, no adsorption effect on the sample.

Aijiren has been producing 2ml glass autosampler vial since 2009. The glass vials we produce are widely used all over the world. For more than ten years, our customers are in more than 70 countries and regions. Our 2mlvial is also well received by customers. Aijiren’s customer service and product quality are among the best in laboratory consumables.

Autosampler vials are available in a variety of sizes, with 2 mL vials being the most common size. During the injection process, the autosampler needle pierces the cap and extracts the desired amount of analyte from the vial. There are different types of vials for chromatography applications.

Material: Borosilicate glass
Finish Type: Screw Neck
Color: Clear / amber
Size: 11.6*32mm
Cap: Black Polypropylene Cap
Closed-top or with 5.5mm center hole
PTFE/silicone Septa
with pre-slit

8-425 thread caps and viars are often used in combination with Shimadzu, Specra-Physics, Varian, and other autosamplers
The vial is made of transparent type 1 class A or amber, type 1 class B borosicate glass and contains writing patches for sample identification.

Aijiren has been engaged in the production of 8-425 HPLC Vial with Caps for more than ten years, we have absolutely rich experience and familiar processes to produce 8-425 HPLC Vial with cap, and we can guarantee the high quality of 8-425 HPLC Vial with Cap produced by Aijiren with reasonable price.

2ml Autosampler Vials 8-425 neck finish represents a hplc vials &gc vials, the vials a diameter of 8mm over the outside of the threads and a thread style of 425, vials has clear and amber, screw cap in lab most of the 2ml vials are 12x32mm.

Screw cap vials are available with either an open hole for autosampler use and standard addition or a solid top for sample storage. One-piece polypropylene caps and membranes are also available. These pierceable screw caps are designed for single use and reduce sample preparation time by eliminating the need to assemble the cap and liner.

8-425 2ml Autosampler Vials from Aijiren is 12*32mm,It is 40% wider than the ordinary vial opening, thus ensuring that the syringe of the autosampler can pierce the bottle smoothly without errors. 8-425 2ml autosampler vials neck Suitable for Shimadzu autosampler and other rotating or robotic arm samplers.

2mL amber glass screw top autosempla vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID viale has an opening about 40% wider than the standard opening vial. Large openings reduce the risk of the autosampler needle bending during sampling. When selecting a 2mL amber glass screw top autosan pravisal, the material of the product is the most important.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum. The bottle cap is made of high-quality polypropylene, and the septum is manufactured with high-quality materials to ensure the efficiency of the function.
Applicable to: Beckman, Diane, Finnigen, Gilson, LKB, Thermoelectric Thermo, Varian Varian, Shimadzu and other autosamplers.

Constructed from high-quality borosilicate glass, these autosampler vials offer exceptional chemical resistance and thermal stability. The 8-425 thread finish allows for easy and efficient sealing, ensuring hassle-free sample preparation.

2ml Autosampler Vials 8-425 neck finish represents a hplc vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. The design of Aijiren screw thread top vials is developed from Europe and the United States, and the design feature is easy to use, especially the use of an automated sample introduction system. 

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.
The vial cap is made of high-quality polypropylene, with precise manufacturing tolerances and a controllable manufacturing environment. The gasket is made of the highest quality PTFE/silicone to ensure the high efficiency of the function.

Aijiren’s hottest 8-425 2ml Screw HPLC Vial with Cap have been introduced. Aijiren uses high-quality raw materials to make 8-425 2ml Screw Vial with Cap. Customer satisfaction and praise have made Aijiren one of the largest laboratory consumables producers in southern China. First, Aijiren will stick original intention to ensure the quality of 8-425 2ml vial.

Transparent viale, 33-extended borosicate glass USP type I, Class A
Step-by-step write marking spot area, 0.5, 1.0, and 1.5ml
Strict quality control to ensure a consistent size of each lot of items.
Flat bottom to ensure consistent matching between the vial and the true neck 6mm of the standard glass insert.
Caps are made of high-quality polypropylene to meet accurate manufacturing tolerances
Septum is made of the highest quality materials to ensure proper functioning

The Screw Cap and Septa for 1.5ml HPLC Autosampler Vial are essential components for secure sealing and sample integrity in HPLC analysis. The screw cap ensures a tight and leak-proof closure, preventing any contamination or loss of samples. The septa, made of high-quality materials, provides excellent chemical resistance and ensures a reliable seal.