8mm Screw Thread Caps on Sale

Compared with crimping seals, threaded vials and caps have lower evaporation, reusability, less damage to hands during operation, and no special tools are required. The 8-425 neck mouth represents a vial with a diameter of 8mm. The outer diameter of the thread of the vial is 8mm, and the thread pattern is 425.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

We provide septa and caps to fit our autosampler crimping the top vial to provide PTFE protection and silicone resealability. The cap includes a double-sided PTFE septum with silicone in the middle.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

Aijiren’s HPLC Vial is divided into two types: clear glass and amber glass. The clarity of clear glass is more obvious. The reagent changes in the vial can be clearly seen. The amber glass can protect the sample in the vial from deterioration due to ultraviolet radiation.

Transparent viale, 33-extended borosicate glass USP type I, Class A
Step-by-step write marking spot area, 0.5, 1.0, and 1.5ml
Strict quality control to ensure a consistent size of each lot of items.
Flat bottom to ensure consistent matching between the vial and the true neck 6mm of the standard glass insert.
Caps are made of high-quality polypropylene to meet accurate manufacturing tolerances
Septum is made of the highest quality materials to ensure proper functioning

The specifications of the vials are 12 x 32 mm.
Accurate handling of bottlenecks to enable the mechanical arm to operate efficiently.
Suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosamplers, and other rotating or robotic arm samplers.
40% larger opening than the standard narrow opening vial prevents syringe problems
The special screw design ensures a consistent seal.

Caps are made of high-quality polypropylene to meet accurate manufacturing tolerances and backed in a managed manufacturing environment. The color of the cap is only black. The septum uses only the highest quality materials to ensure proper function and can be easily penetrated by pre-slits.

8-425 thread caps and viars are often used in combination with Shimadzu, Specra-Physics, Varian, and other autosamplers
The vial is made of transparent type 1 class A or amber, type 1 class B borosicate glass and contains writing patches for sample identification.

2mL amber glass screw top autosempla vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID viale has an opening about 40% wider than the standard opening vial. Large openings reduce the risk of the autosampler needle bending during sampling. When selecting a 2mL amber glass screw top autosan pravisal, the material of the product is the most important.

If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.

Let me introduce the material of 8-425 2ml autosampler vials, 33 Expansion borosilicate glass USP Type I Class A made of clear vial, or 51 Expansion borosilicate glass USP Type I, Class B made of Amber vial.Our glass uses neutral borosilicate and low borosilicate, but our neutral borosilicate can reach the standard of high borosilicate, and our low borosilicate can reach the standard of neutral borosilicate. We use excellent raw materials to make 8-425 2ml autosampler vials.

8-425 2ml Autosampler Vials from Aijiren is 12*32mm,It is 40% wider than the ordinary vial opening, thus ensuring that the syringe of the autosampler can pierce the bottle smoothly without errors. 8-425 2ml autosampler vials neck Suitable for Shimadzu autosampler and other rotating or robotic arm samplers.

Aijiren has been producing 2ml glass autosampler vial since 2009. The glass vials we produce are widely used all over the world. For more than ten years, our customers are in more than 70 countries and regions. Our 2mlvial is also well received by customers. Aijiren’s customer service and product quality are among the best in laboratory consumables.

Aijiren has been producing 8-425 2ml hplc glass vial for more than ten years. During this decade, Aijiren added new factories and production lines to strictly regulate production standards and processes. Continuous improvement has made Aijiren one of the largest laboratory consumable suppliers in southern China.

Welcome to buy Aijiren 8-425 2ml hplc vial with cap. Aijiren has a large output and can quickly complete the mass production of 2ml hplc vial with cap after you place an order. Aijiren has long-term cooperation with freight forwarders to ensure that you get the goods as soon as possible. To purchase 2ml hplc vial with cap, please choose Aijiren.

Aijiren has been engaged in the production of 8-425 HPLC Vial with Caps for more than ten years, we have absolutely rich experience and familiar processes to produce 8-425 HPLC Vial with cap, and we can guarantee the high quality of 8-425 HPLC Vial with Cap produced by Aijiren with reasonable price.

Aijiren’s hottest 8-425 2ml Screw HPLC Vial with Cap have been introduced. Aijiren uses high-quality raw materials to make 8-425 2ml Screw Vial with Cap. Customer satisfaction and praise have made Aijiren one of the largest laboratory consumables producers in southern China. First, Aijiren will stick original intention to ensure the quality of 8-425 2ml vial.

Aijiren’s 8-425 2ml Autosampler Vials is very popular. It is favored by our customers for its high quality and cheap price. Aijiren is a manufacturer of 8-425 2ml Vials, so we bring our customers to the factory price.Buy 8-425 vials,Choose Aijiren.