2ml 8mm Clear Glass Vials for WATERS

The polypropylene caps produced by Aijiren are known for their good sealing effect. There are two types of caps, which are used to store samples in a sealed state and have a center hole to facilitate sampling with an autosampler. Aijiren polypropylene bottle caps are widely used in chromatographic analysis and are often used with screw vial.

2ml 8-425 screw cap and vial are usually used in combination with WATERS autosampler. The sample bottle is made of transparent type A type 1 A or amber type B type B clear glass, and contains a paste for sample identification The label and bottle cap are made of high-quality polypropylene with precise manufacturing tolerances and are lined in a controlled manufacturing environment.

Features:
1) 8mm screw vials can be used with all common autosamplers
2) Standard narrow neck design for GC and HPLC
3) 8mm wide opening that is easy to drill holes

The size of 2ml 8mm Clear Glass Vial is 12 x 32mm. The precise handling of the bottleneck enables the robot arm to operate efficiently. The 2ml 8mm Clear Glass Vial has an opening 40% larger than the standard narrow-mouthed vial to prevent problems with the syringe. The special thread design ensures a consistent seal.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum. The bottle cap is made of high-quality polypropylene, and the septum is manufactured with high-quality materials to ensure the efficiency of the function.
Applicable to: Beckman, Diane, Finnigen, Gilson, LKB, Thermoelectric Thermo, Varian Varian, Shimadzu and other autosamplers.

2ml HPLC Vials in 8mm is a 12×32 vial with a standard opening. The vial is made of amber I type B grade borosilicate glass. The vial has a standard graduated writable patch, which can easily fill and identify the sample. An 8-425 bottle cap is required. And 8mm septum. Please check the assembled cap and septum.

Material: Borosilicate glass
Finish Type: Screw Neck
Color: Clear / amber
Size: 11.6*32mm
Cap: Black Polypropylene Cap
Closed-top or with 5.5mm center hole
PTFE/silicone Septa
with pre-slit

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.

Aijiren Clear 8-425 HPLC Sample Vial, Clear Type 1 Class A, Amber 8-425 HPLC Sample Vial is manufactured in Type 1 Class B Borosilicate Glass, sample identification, measurement values 0.5, 1.0 and 1.5 ml. Consistency between the vial and the true neck 6mm of the standard glass insert is always guaranteed.

Aijiren has been producing 2ml glass autosampler vial since 2009. The glass vials we produce are widely used all over the world. For more than ten years, our customers are in more than 70 countries and regions. Our 2mlvial is also well received by customers. Aijiren’s customer service and product quality are among the best in laboratory consumables.

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.
The vial cap is made of high-quality polypropylene, with precise manufacturing tolerances and a controllable manufacturing environment. The gasket is made of the highest quality PTFE/silicone to ensure the high efficiency of the function.

Aijiren’s hottest 8-425 2ml Screw HPLC Vial with Cap have been introduced. Aijiren uses high-quality raw materials to make 8-425 2ml Screw Vial with Cap. Customer satisfaction and praise have made Aijiren one of the largest laboratory consumables producers in southern China. First, Aijiren will stick original intention to ensure the quality of 8-425 2ml vial.

Welcome to buy Aijiren 8-425 2ml hplc vial with cap. Aijiren has a large output and can quickly complete the mass production of 2ml hplc vial with cap after you place an order. Aijiren has long-term cooperation with freight forwarders to ensure that you get the goods as soon as possible. To purchase 2ml hplc vial with cap, please choose Aijiren.

Aijiren has been producing 8-425 2ml hplc glass vial for more than ten years. During this decade, Aijiren added new factories and production lines to strictly regulate production standards and processes. Continuous improvement has made Aijiren one of the largest laboratory consumable suppliers in southern China.

Aijiren’s 8-425 2ml Autosampler Vials is very popular. It is favored by our customers for its high quality and cheap price. Aijiren is a manufacturer of 8-425 2ml Vials, so we bring our customers to the factory price.Buy 8-425 vials,Choose Aijiren.

The thread design of the 8-425 threaded sample vialcan make the septum achieve extremely strong re-tightness, so this sample vial can also be used as a storage vial, and it can also be used for autosampler. This design sample vial is mostly suitable for Shimadzu Hitachi and other Japanese enterprise instruments.

The Aijiren 8-425 screw cap and vial are suitable for waters and other rotating or robotic arm samplers. The specifications for the 8-425 HPLC sample vial are 12 x 32 mm. The opening of the 8-425 HPLC sample vial is 40% larger than the standard narrow opening vial, preventing syringe problems. Accurately handle bottlenecks and enable the mechanical arm to operate efficiently. The special screw design ensures a consistent seal.

The screw cap produced by Aijiren is engraved with knurling on the side for excellent grip and comfort when applying it to a vial. The silicone rubber/PTFE septa used in the lining can provide an appropriate amount of resistance for the auto-injection needle during the sampling process, so that they can penetrate the sample bottle correctly without damaging the septum or the injection needle.

Aijiren has been engaged in the production of 8-425 HPLC Vial with Caps for more than ten years, we have absolutely rich experience and familiar processes to produce 8-425 HPLC Vial with cap, and we can guarantee the high quality of 8-425 HPLC Vial with Cap produced by Aijiren with reasonable price.