PES Yellow Syringe Filter

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. t. In HPLC analysis and IC analysis, syringe filters can be used to filter sample solutions, which is an important step in sample pretreatment.

A syringe filter is a quick, convenient and reliable filter tool used routinely in the laboratory. Because they don’t need to change the membrane and filter cleaning, it’s eliminating the complex and time-consuming preparation.  

1. The pore size of the needle-punched membrane is accurate, providing comprehensive protection for your instrument and chromatographic column
2. There is a clear label on the Nylon syringe filter to avoid confusion
3. The luer interface of the needle filter with lock can prevent the filter from flying out due to excessive pressure

Product applications: water purification, HPLC sample preparation, mobile phase solution filtration, cell culture, microbial filtration or sampling, protein precipitate removal, particle removal and monitoring, QC analysis, content consistency, dissolution testing, environmental sampling, food analysis. Generally speaking, 0.45 ¦Ìm pore size is suitable for removing particles from samples or the mobile phase solution of chromatography equipment, and 0.22 ¦Ìm is suitable for filtering microorganisms.

Aijiren’s PVDF syringe filters are hydrophilic in nature and have strong chemical compatibility. They can bring precision to your research and ensure the highest level of performance. Our filter range is designed with female leur-Lock imports and male Leur-slip exports. In addition, these filters have better mechanical resistance and it can withstand high temperatures.

Aijiren brand syringe filters are HPLC certified to ensure reliable and consistent results. Water, methanol, and acetonitrile are used for testing, and HPLC is used for detection at 210 and 254 nm wavelengths. None absorbs ultraviolet light, which can provide a purer analytical background.

Many different types of materials are used in syringe filters. A variety of materials, diameters, pore sizes, and in sterile and non-sterile options are on our list. These syringe filters offer outstanding microfiltration for applications in HPLC, water treatment, environmental, biotechnology, beverages, food, pharmaceuticals, and other fields related.

13 mm Syringe Filters: For sample volumes <10 mL range; Ideal choice for most applications; Holdup (dead) volume is <15 ul; Female inlet luer lock; Maximum operation pressure <15 bar; Bubble point: Hydrophilic 2-3 bar; Hydrophobic 1-1.2 bar.

Syringe filter is a small, disposable device used for filtering liquids or gases.It consists of a plastic housing with a membrane filter at one end and a female luer lock or luer slip connection at the other end, which allows it to be attached to a syringe or other fluid delivery system.
Syringe filters are commonly used in laboratory and research settings to remove particles, microorganisms, or other impurities from samples before analysis or further processing. The membrane filter in a syringe filter acts as a barrier, allowing only the desired components of the sample to pass through while retaining any larger particles or contaminants.
The choice of membrane material depends on the nature of the sample and the substances to be filtered.

Compared with Nitrocellulose membrane (NC membrane), PVDF membrane has many advantages. PVDF membrane has high mechanical strength, is not easy to break or curl; it has the advantages of low background, wide solvent compatibility, and excellent coloring ability; in addition, PVDF membrane can be repeatedly tested after proper treatment.

Aijiren’s CA Syringe Filter 90% is exported to the world’s major economically developed countries. Filters can provide foundry services according to customer needs. The produced filters have good consistency between batches, and there are strict control procedures from raw materials to production processes to in and out of warehouse delivery management to ensure the quality and use value of the products.

Cellulose Acetate Syringe Filter Surfactant-free membrane for cleanliness in downstream applications, Filter type printed on the filter for ease of identification, Convenient, larger pack sizes,Gamma sterilised.

The Nylon Syringe Filter produced by Aijiren is mostly used for reagent filtration or sample preparation. Nylon Syringe Filter has different specifications. The filter membrane diameter is 13mm, 25mm and 33mm, which can be selected according to the capacity of the sample. Aijiren provides 0.22μm and 0.45. Two μm specifications are convenient for customers to choose. The Nylon Syringe Filter produced by Aijiren meets customers’ requirements and needs for product preparation.

Polyethersulfone (PES):?Hydrophilic, stable in low pH, have low levels of extractables, and exhibit low protein binding, making them suitable for many aqueous and organic solvents. PES membranes allow higher liquid flow than PTFE. Temperature resistant. pH range ~3-14 (sometimes quoted as 1-14).

Syringe filter is a disposable filter unit designed to remove impurities from liquids or gases using a syringe as the fluid delivery system.
It consists of a plastic housing with an inlet and an outlet, and a filter membrane positioned between them.
The filter membrane is often made of materials such as polypropylene, polytetrafluoroethylene (PTFE), or nylon.
To use a syringe filter, the liquid or gas to be filtered is drawn into a syringe, and then the syringe is attached to the inlet of the syringe filter.

Polyethersulfone filter has the characteristics of high flow rate, low extraction loss, and higher mechanical resistance than cellulose membrane. It is suitable for biological, pharmaceutical, sterilization and filtration. The membrane is sealed in the polymer shell without using any adhesive. Each unit is ETO or gamma ray sterilized and guaranteed to be pyrogene-free.

Our syringe filters are made from high-purity polytetrafluoroethylene (PTFE) membrane for superior performance and durability. PTFE is an ideal material for HPLC applications with excellent chemical compatibility, low protein binding, and minimal analyte adsorption. This ensures sample integrity for accurate, reproducible results.

Single-use HPLC syringe filters featuring 13mm and 25mm diameters with 0.22µm and 0.45µm pore sizes. Available in PTFE, Nylon, PVDF, PES, MCE, CA, and PP membranes for reliable aqueous and organic sample clarification.

Aijiren syringe filter membrane use method introduction: before inhaling the sample, suck about 1ml of air into the syringe, so as to minimize the liquid residue, suck the sample into the syringe, invert the syringe and clear all the residues on the top Clean, connect the needle filter to the syringe, tighten it gently to ensure a good seal, filter the sample in the syringe and inject it into the sample bottle, and then follow the steps to maximize the recovery rate, remove the filter, and suck air into the syringe, Reconnect the filter head and eject all residual samples.

13mm, 25mm 0.22um, 0.45um hydrophobic PVDF (polyvinylidene fluoride) membrane syringe filter is a filtration device commonly used in laboratory settings to remove particulates and microorganisms from fluids.
It’s important to note that specific details of hydrophobic PVDF membrane syringe filters, such as pore size, diameter, and filtration capacity, can vary between manufacturers and product lines.
Therefore, it’s recommended to consult the product specifications or contact the supplier for precise information about the syringe filters you are considering for your specific application.

Our Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings.

Your benefits when using Aijiren syringe filters£ºDifferent membrane types to meet multiple filtration needs. Low content of extractable compounds. Fast flow geometry for easy filtration. Low hold-up volume for maximum filtrate recovery. HPLC certified

PTFE: is perfect for the filtration of gaseous or organic solvent-based samples and highly corrosive substances. Hydrophobic so provides chemical resistance to aggressive media and excellent temperature stability allowing an extended sampling range. If used with aqueous samples, the membrane usually requires pre-wetting (normally by using a small amount of alcohol). Can also be used to prevent moisture passing through air vents. pH range ~1-14.

The Non-sterile Disposable Syringe Filter is a versatile filtration device used in laboratories for sample preparation and clarification. It consists of a polypropylene housing with a membrane filter, providing efficient filtration of particulate matter and microorganisms. These syringe filters are available in various pore sizes and diameters to suit different filtration needs, and they come in non-sterile packaging.

Aijiren PP syringe filter
Product Model: 25mm,0.22um Sterilization Independent Packaging
Application: sterilize and filter the aqueous solution
Operating temperature: 45¡ãC
Inlet pressure: bar (psi): 5.2 (75)
Wettability: hydrophilic
Filter membrane diameter: 25mm
Membrane aperture: 0.22um