Pink 13mm PTFE Syringe Filter

The special color contrast provided on the surface of the MCE film helps to detect particles and minimize eye strain. It is ideal for the recovery and retention of bacteria in colony counting and sterility testing, as well as water/wastewater analysis and other microbiological tests.

Another way to determine the micron size of columns, 0.45 um for >3 um, and 0.22 um for <3um. 0.45 um membranes are typically used for general filtration and particle removal while 0.2/0.22um membranes, or sterilizing-grade membranes, are most commonly used for solution sterilization (bacteria removal).

The Syring Filter with nylon membrane produced by Aijiren has good hydrophilicity, acid and alkali resistance, and oxidation resistance. It is not only suitable for aqueous solutions containing acids and alkalis, but also for organic solvents such as alcohols, hydrocarbons, lipids, phenols, ketones and other organic solvents. It can be used for organic solvents such as strong acid, 70% ethanol, dichloromethane and so on. High temperature resistance, good strength, stable chemical properties.

MCE features: relatively uniform pore size, high porosity, no media shedding, thin texture, low resistance, fast filtration rate, and minimal adsorption.
The main purpose of MCE: to filter out the particles and bacteria of liquid medicine, gas, oil, beverages, sprinkles, electronic instruments, etc., and can also be used for the detection of particles and bacteria.

PTFE Syringe Filter is resistant to almost all corrosive chemicals, which makes PTFE syringe filters an ideal choice. However, the disadvantage of natural hydrophobic PTFE is that after many chemicals are diluted with water, the aqueous solution cannot pass through. Need to be wetted with water in advance.

Use Aijiren CA syringe filter to remove interfering substances and fine particles to the rated pore size, thereby obtaining a cleaner sample extract. Cellulose acetate (CA) syringe filters are ideal for filtering tissue culture media and filtering sensitive biological samples. Adding a syringe filtration step before chromatographic injection not only helps to ensure more consistent and reliable results, it also helps protect the instrument and extend the life of the column. Economical choice Syringe filters are available in a variety of sizes and membrane types to meet the needs of any application.

Aijiren brand syringe filters are HPLC certified to ensure reliable and consistent results. Water, methanol, and acetonitrile are used for testing, and HPLC is used for detection at 210 and 254 nm wavelengths. None absorbs ultraviolet light, which can provide a purer analytical background.

These syringe filters feature a user-friendly design, allowing for convenient and hassle-free filtration. They are compatible with standard luer lock syringes, enabling simple attachment and detachment. The filters come pre-sterilized and individually packaged, ensuring convenience and minimizing the risk of contamination.

Aijiren’s Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings.

Customers can use sterile syringe filters to filter out particles and contamination in the fluid. Filtration requires a 0.2¦Ìm pore size to produce a sterile filtrate. The volume of the solution to be filtered varies from a few milliliters to several liters. Typical fluids may include serum-containing media, buffers, biological or protein samples, reagents, or other fluids, and need to be free of particulates or microbial contamination.

Aijiren syringe filter membrane is made of polyethersulfone (PES), hydrophilic (Hydrophilic), pore size is 0.22¿˜m, shell diameter is 13mm, effective membrane diameter is 11.7mm, and effective membrane area is 1.09cmº†.

Cellulose acetate is a very low protein binding membrane that is ideal for aqueous based samples and biological samples. It is a lower protein binder than either polyethersulphone or PVDF membranes, but has a lower chemical resistance than regenerated cellulose (RC). CA is a strong membrane mechanically and hydrophilic.

In order to filter the particles correctly, you need to find the right size filter. You should choose the diameter of the filter carefully. They usually have sizes of 13mm, 25mm and 30mm. Each of these has a different ability to hold particles. According to the sample size, you can choose the appropriate filter diameter. For example, a diameter of 13 mm can be used for 1-10 ml samples. Similarly, 25 mm PVDF syringe filters can be used for sample volumes of 10-100 ml. Their retention is less than 100 ml.

Aijiren’s membrane materials are supplied by the best names in the industry and the ISO9000 certified manufacturing is carried out to the highest standards, in certified clean room conditions, using the latest manufacturing technology to ensure a high quality, consistent product. All the syringe filters are HPLC certified.

Compared with Nitrocellulose membrane (NC membrane), PVDF membrane has many advantages. PVDF membrane has high mechanical strength, is not easy to break or curl; it has the advantages of low background, wide solvent compatibility, and excellent coloring ability; in addition, PVDF membrane can be repeatedly tested after proper treatment.

Aijiren syringe filter is a fast, convenient and reliable filter tool, usually used in the laboratory. Since they do not require membrane replacement and filter cleaning, complicated and time-consuming preparations are eliminated. It is widely used for sample prefiltration, particle removal, aseptic filtration of liquids and gases.

Ideal for use with aqueous and organic solvents, Nylon Syringe Filters are an excellent choice for filtering high-performance liquid chromatography samples. Nylon syringe filters are durable, tear resistant and wet evenly.
PES (Polyethersulfone ) syringe filter is natural hydrophilic which makes is an ideal choice (highly recommended) for aqueous solutions and alcohols. It’s not necessary to treat the filter membrane surface with wetting agents.

Aijiren¡¯s PP syringe filter uses a hydrophobic polypropylene membrane, which has stable physical and chemical properties, good compatibility, low protein adsorption, and is suitable for filtration of aqueous solutions and most solvents. Commonly used to filter biological samples, solvents, deionized water and reduce biological load, the hydrophobic PP filter membrane is particularly good for gas filtration. The product was sterilized by dry heat at 121¡ãC for 15 minutes.

The syringe filters are designed for easy and efficient filtration of liquids and gases. They feature a syringe-like structure with an inlet and outlet, allowing for direct attachment to a syringe or other fluid delivery systems. The filters remove particulates, microorganisms, and unwanted substances, ensuring clean and clarified samples for analysis.

Our Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings.

A syringe filter is a disposable filtration device that is attached to a syringe for the purpose of filtering or clarifying liquid samples.
It consists of a plastic housing with a membrane filter that allows for the removal of particles or contaminants from the sample as it passes through the filter.
Syringe filters are widely used in research laboratories, quality control laboratories, pharmaceutical industries, biotechnology companies, and other applications where the filtration of liquid samples is necessary.

Adding a syringe filtration step before the sample injection not only helps to ensure more consistent and reliable results. It also helps protect delicate instruments and extend column life.

The syringe filter has the following characteristics:
1. Convenient, readily available, easy to operate, economical and practical.
2. Reliable bacteria retention efficiency ensures the filtering and sterilization effect.
3. Larger effective membrane filtration area: 1.09cm2.
4. High flow rate, high throughput, dead volume no more than 10¦Ìl.
5. Very low protein adsorption.
6. Pass HPLC dissolution test.

In chromatographic experiments, the sample is placed on the chromatographic column for analysis after the sampler is injected. However, the inner core of the sampler and the chromatographic column is relatively thin. If there are large particles in the sample, it may cause the device to block , Need to use Syringe Filter for preliminary sample filtration treatment.