9mm HPLC borosilicate glass Vials kits with silicone PTFE Septa

Aijiren presses Silicone and PTFE composite into the picture, and cuts them into rectangular sheets of similar size. Because PTFE is easy to curl and deform, the raw materials in the picture are all curled. Wait for it to enter the dryer to dry the moisture. Keep it level. Aijiren uses a mechanical laser to cut Septa, and guarantees the integrity and chemical nature of Septa.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

Headspace vials are typically larger than the 2 mL volumetric flasks used in many liquid sampling systems. Headspace vials are commonly available in 10 mL and 20 mL capacities.

The V-bottom design of the high recovery vials produced by Aijiren is to minimize the residual reagents in the vial, and the automatic injection needle can be directly inserted into the bottom to suck up the reagents. It is often used in experiments where reagents are precious or in rare quantities.

HPLC vials are specially designed containers used to hold samples for injection into an HPLC instrument for analysis. These vials are made of high-quality materials such as borosilicate glass or plastic that are chemically inert and have minimal interaction with the sample.
HPLC vials are specially designed containers used to hold samples for injection into an HPLC instrument for analysis. These vials are made of high-quality materials such as borosilicate glass or plastic that are chemically inert and have minimal interaction with the sample.

Snap Cap Vials Wide opening vial is easier to fill and provides a larger target area for the autosampler needle Fit most autosamplers that accommodate the 12x32mm vial format Superior quality 33 expansion borosilicate clear glass Type 1, (Class A) or 51A amber glass Uniformly flat

Aijiren’s Vial rack is made of high-quality plastic, which is convenient for placing the hplc vial and also convenient for lab staff to label.

Aijiren’s Snap Vial uses more glass on the neck to ensure that it is not easy to break during the snapping process. The snap-on seal neck is compatible with crimping and/or snap-on seals, and the outer cover can be removed without any special tools. It is recommended to use these sample vials for short-term sample storage and non-volatile samples because they are not as tight as crimp or threaded seals.

The 9mm screw neck vial is the 9mm screw neck vial, which has the highest sales volume among Aijiren’s HPLC vials, because it can be used with most autosamplers on the market. In addition, the 9mm screw neck vial has a wide mouth and is convenient for automatic injection. Needle for pulling samples.

10ml,22.5ⅹ46mm,20ml,22.5ⅹ75mm, DM18
Material: USP1, Borosilicate Glass
Box packaged tpo minimize sample bottle damage.
Manufactured under strict quality, which ensures dimensional consistency from lot-to-lot
Suitable for headspace analysis of volatile solids and gases.
Store volatile samples to prevent sample evaporation
High temperature resistance and corrosion resistance
Mainly used in gas chromatography analysis for headspace analysis.

2ml screw HPLC borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample containment. These vials are specifically designed to meet the requirements of HPLC analysis and are made from borosilicate glass.
Borosilicate glass is chosen for its excellent properties that make it suitable for HPLC applications. It has high resistance to thermal shock, meaning it can withstand rapid changes in temperature without breaking.
This is important in HPLC, where samples are often subjected to heating and cooling cycles during the analytical process.

1.5 ml vials from Aijiren Technology, Inc with high quality and favorable price. Zhejiang Aijiren is a manufacturer of Laboratory consumables. We supply autosampler vials, septa and caps at factory price. 9mm Short Thread Vials ND9 can be used for GC and HPLC.

The snap-on sample vial is made of type 1 borosilicate glass (type A, 33 expanded borosilicate glass), transparent or amber, or made of polypropylene. The snap-on vial can accept either aluminum snap-on seals or polyethylene snap-on caps. Very suitable for short-term storage. You can also deactivate MS authentication.

The glass media bottle is made of borosilicate glass or soda lime glass and equipped with a plug or cover to prevent the contents from overflowing or being polluted by the external environment. Reagent bottles are ideal for storing powders and liquids. Amber or red media bottles can protect photosensitive contents from ultraviolet, visible and infrared radiation.

The production process of high-performance total organic carbon (TOC) sample bottles is kept clean, and the workshop and production process are guaranteed to be clean, which can reduce instrument background and ensure top-level system performance for low-level monitoring.
It is equipped with a polypropylene cap with an open top and a PTFE/silicone low-leakage gasket bonded to the cap. The level 1 vials have been assembled and quality checked before leaving the factory.

Aijiren finds the right size filter in order to ensure that customers can filter the particles correctly. It is recommended that you choose the diameter of the filter carefully. Aijiren produces usually sizes of 13 mm and 25 mm. Each of them has a different ability to hold particles. According to the sample size, the appropriate filter diameter can be selected. For example, a diameter of 13 mm can be used for samples of 1-10 ml. Similarly, 25 mm PVDF syringe filters can be used for sample volumes of 10-100 ml. Their retention is less than 100 ml.

The glass of the reagent bottle has a low thermal expansion coefficient and can be autoclaved repeatedly (resistance to 140¡ãC). With scale and white enamel marking area, it is sturdy and durable. Comply with ISO GL 45 screw standard, compatible with ISO R115 and DIN 168 standards. Polypropylene (PP) external thread cap with O-shaped anti-drip ring, replaceable.

Crimp Caps squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The crimp cap vial requires crimping tools to carry out the sealing process.

Vial micro insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro Inserts allow for maximum sample recovery and easier sample removal when combined with hplc autosampler vials.

The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Glass Screw Top Autosampler Vials, the product material is of paramount importance.

The specifications of the vials are 12 x 32 mm.
Accurate handling of bottlenecks to enable the mechanical arm to operate efficiently.
Suitable for Aijiren, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosamplers, and other rotating or robotic arm samplers.
40% larger opening than the standard narrow opening vial prevents syringe problems
The special screw design ensures a consistent seal.

Aijiren’s chromatography vial has a wide-mouth crimp cap that provides a larger target area and improves the accuracy of the autosampler needle. The crimped vials with integrated micro inserts are made of transparent glass. Septa types: PTFE/silicone, natural rubber/TEF septa, single slit septa are available. The three-layer spacer of natural rubber/red butyl/TEF combines the good physical properties of Nat. Rubber with good butyl chemistry (resealability).