Factory price 1.5ml autosampler gc vial for chromatography

The 8-425 Aijiren 2ml autosampler vial is 12* 32mm wider than normal vial openings, so autosampler syringes can drill holes in the autosampler vial smoothly without error. 8-425 2ml autosampler vial neck PerkinElmer autosampler and other rotations or suitable for robotic arm samplers.

Caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate and is great for nail polish remover and higher concentration acids & alkalis. Good for non-oil products filled at room temperature. Because this lining system is paperless, your samples will not be contaminated with fiber or paper particles from the closure. Available in Phenolic caps.

High quality Aijiren 9mm 2ml Screw vial for chromatography analysis, amber glass makes it compatible with sunscreen samples. The 0.3 ml clear glass micro-insert can be fixed in a 9mm 2ml HPLC Screw Vial, and the size of the inserted vial is 6*29mm. The conical bottom vial can save samples during the injection process. 9 mm wide open screw top cap for better needle injection.

2ml UPLC (Ultra-Performance Liquid Chromatography) glass vial refers to a specific type of vial used in analytical chemistry for storing and handling liquid samples in UPLC systems. UPLC is a high-pressure liquid chromatography technique that allows for fast and efficient separation of compounds in a liquid sample.
These vials are specifically designed to withstand the high pressures and temperatures often encountered in UPLC systems. They are typically equipped with a screw cap or a snap-on cap to provide a secure seal and prevent leakage or contamination of the sample.

1.5ml autosampler GC vial is a type of vial specifically designed for automatic sample injection in gas chromatography (GC) systems. These vials are typically made of glass or plastic and are used to contain liquid or solid samples that will be analyzed using a gas chromatograph.
Autosampler vials are designed to be compatible with automatic sample handling systems, allowing for efficient and precise sample introduction into the GC instrument.

“Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass
Aijiren Vials have a standard graduated write-on patch for easy filling and identification
Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals
Snap caps or aluminum seals ensure a secure seal for samples”

Padded 2ml snap top Autosampler vials are widely used in experiments. The pads are made from PTFE and high quality silicone rubber or ultra-high purity silicone as raw materials. Make sure the gasket is non-toxic. Using an adhesive-free adhesive process, PTFE film and silicone rubber or silicone adhere and maintain a composite post-interval Teflon layer contact reagent with good properties, good chemical inertity of the two materials.

2 ml HPLC borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis. Borosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.When working with water samples in HPLC, borosilicate glass vials are a suitable choice due to their resistance to water and other polar solvents.

Chromatography autosampler vials are widely used in chromatography, chemistry, medical and other fields. Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications. Different vial mouth designs meet different actual needs.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Neck Type: Screw, Snap / Crimp
Neck Diameter: 8-425, 9mm, 10-425, 11mm
Color: Clear / Amber
Graduated: with or without
Material: Borosilicate Glass

Aijiren’s 10-425 screw vial is made of borosilicate hydrochloric acid glass, which has the characteristics of high temperature resistance and corrosion resistance, 10-425 screw vial is very compatible with the automatic sampler with a mechanical arm.

Save time in sample preprocessing and reduce the risk of contamination with the Ajiren 9-425 screw sample vial convenience kit. Each kit includes 100 glass sample vials and 100 threaded thread caps with septum. Two reusable compartment trays keep matching supplies together while protecting vials and closures.

Aijiren 13-425 glass vials with screw cap are customized products based on your experimental requirements for vial types, writing areas, logos and other individual parameters. Aijiren 13-425 glass vials with screw cap is fully compatible with SHIMADZU autosamplers. Compared to crimp top vials, 13-425 glass vial with screw cap can easily tighten the lid without the help of a tool. Polypropylene threaded cap with PTFE septa, can form a good seal on the vial, improve work efficiency.

Snap caps provide a secure seal that minimizes evaporation, even with volatile samples. Snap caps are often more convenient than crimp caps as they can easily be applied and removed by hand. An audible click ensures a secure seal has been formed and that the cap is correctly aligned. Snap/crimp vials can be closed with either snap caps or crimp caps.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

The 2ml 9mm HPLC Autosampler Vials also offers a variety of closures, including crimp/snap or threaded closures. Screw-type closures can also be of different sizes identified by the outer diameter of the vials. If you use an autosampler, choose the 2ml 9mm HPLC Autosampler Vials for your specific equipment brand. 2ml 9mm HPLC Autosampler Vials work with Aijiren autosamplers.

1.5/2ml autosampler vial refers to a type of sample container commonly used in analytical chemistry and laboratory settings.
The vial has a total volume capacity of 1.5 to 2 milliliters (ml).
Autosampler vials are designed to be compatible with automated liquid handling systems, such as autosamplers, which are used to inject samples into analytical instruments for analysis.
The vial typically consists of a cylindrical glass or plastic body with a narrow opening at the top.
It is sealed with a cap or septum to prevent sample contamination and evaporation.

• Widely used in HPLC applications, universally usable vials for almost autosamplers, include the one with robotic handing.
• Snap vials can be closed with either snap caps or crimp caps.
• Snap caps can be easy as push-on, pull-off by hand.
• Clear glass vials–made from USP Type I, Class A, 33Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51Borosilicate Glass.

Aijiren 2ml 11mm Snap Ring HPLC Vials has a standard scale and writing area for easy filling and identification. 2ml 11mm Sanp Ring HPLC vial can be matched with most autosamplers on the market, such as Aijiren, Thermo Fisher, Shimadzu and other well-known brands.

Aijiren focus on improving the safety and integrity of our samples. Aijiren provide innovative 9mm thread caps and 9mm 2ml Hplc Screw Vials to ensure consistent productivity in all separation processes. These vials are the best choice for the latest autosampler. Standard open screw vials are made of borosilicate glass with a maximum filling volume of 2ml.

2ml Amber Snap Autosampler Vial is mainly used in lab chromatography analysis. This 2ml Amber Snap Autosampler Vial has some features: 1.Extremely high inertness: The inertness of the sample vial can reduce the peak variability of the analyte. 2. Consistent performance: Each batch of the sample vial has consistent performance, which saves you more time for troubleshooting and re-running samples.

Aijiren Crimp Top vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, it has a flat bottoming function and compatibility with automatic sampling equipment.

Aijiren focus on improving the safety and integrity of our samples. Aijiren provide innovative 10mm thread caps and 10mm 2ml Hplc Screw Vials to ensure consistent productivity in all separation processes. These vials are the best choice for the latest autosampler. Standard open screw vials are made of borosilicate glass with a maximum filling volume of 2ml.

9mm Closures are formed by the combination of Cap and Septa. Screw Neck guarantees the tightness of 9mm Closures. Generally speaking, one end of PTFE faces the sample surface, because PTFE is highly inert and difficult to react with chemicals. Aijiren also supports separate orders for Cap and Septa.

1.5ml 9mm Screw Neck Vial for automatic samplers is made of low metal type 33 and 51 COE borate glass to prevent sample instability or leaching. By selecting the cap and pad, we provide the best sealing solution for the sample.

11mm Snap Top Closures are made of PP. The translucent Cap design allows users to see the fixed card slot. The inside of the Snap Cap has 4 protrusions for fixing in the lateral groove of the Vial Neck.

All Aijiren vials are ideal for autosamplers and offer excellent chemical compatibility and ultra-cleanliness. Crimp Top Sample Vials are the most commonly used gas sampling vials on the market today. Sample vials with a capacity of 2ml, particularly suitable for laboratory use. At the same time, some vial bottoms are designed at the bottom of the bay, so the bottom is flat and compatible with automatic sampling equipment.