2ml Snap Top HPLC Vial and Pad on Sale

Transparent, Type 1 Class A or Amber, Type 1 Class B, Aijiren viale made of borosicate glass
The Aijiren Viale has a standard calibrated write patch that is easy to fill and identify.
Snap caps used in Aijiren vial systems are a convenient replacement for aluminum seals.
Snap caps or aluminum seals ensure safe sealing of samples

11mm Snap caps provide a secure seal, minimizing evaporation even with volatile samples, the audible click ensures that a secure seal has been formed and the cap is properly applied. Snap caps have septa pre-assembled, Snap caps are compatible with Aijiren Vials and other snap-ring style vials.

Hplc Vials Septum
Red PTFE White Silicone Septum
Septum Size: 11*1mm

Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand. A audible click ensures a secure seal has been formed and that the cap is correctly aligned. Precision-formed neck improves autosampler handling.

Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short term storage. Deactivation, MS Certification is also available.

11mm Gc Snap Top Caps With Ptfe Silicone Septa For 2ml Snap Vials , Find Complete Details about 11mm Gc Snap Top Caps With Ptfe Silicone Septa For 2ml Snap Vials,Auto Sampler Vial,Hplc Vial,Snap Vial from Supplier or Manufacturer-Jiangyin Allpro Polymer Technology Co., Ltd.

Polypropylene Snap Micro Vials can be used in most standard gas and liquid chromatography autosamplers. The conical interior ensures maximum retrieval of contents without the hassle of using removable liners.

Due to the large amount of glass used in the vial neck, the snap seal vial is hard to break when the cap is removed. The neck finish of the snap seal is compatible with crimps and/or snap seals and does not require any special tools to remove the cap. These viars are recommended for short-term sample storage and non-volatile samples because seals are not as secure as crimp or thread seals.

2ml Snap Top HPLC Vial is made of Type 1 borosilicate glass. Comparing with 9mm screw vial, this 2ml Snap Top HPLC Vial mouth is wider opening. So 2ml Snap Top HPLC Vial is easier to fill and provides a larger target area for the autosampler needle. That means, the 2ml Snap Top HPLC Vial can protect the needle.

Snap vial is manufactured from Type 1 borosalicate glass (Class A, 33 extended borosicate glass) and is available from transparent or scarlet, or polypropylene. Snap vial accepts both aluminum snap seal and polyethylene snap cap. Ideal for short-term storage. De-activation and MS authentication are also available.

11mm Snap Top Closures are made of PP. The translucent Cap design allows users to see the fixed card slot. The inside of the Snap Cap has 4 protrusions for fixing in the lateral groove of the Vial Neck.

The 2ml snap autosampler vial is often used in conjunction with the automatic sampler. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass with a writable label for sample identification.

2ml snap autosampler is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass, and attach a writable label for sample identification.

The vial cap is made of high-quality polypropylene, and the septum is made of the highest-quality materials. The precise manufacturing tolerances and the controllable manufacturing environment ensure the high efficiency of product functions.

  The 11mm snap vial is specially designed and produced to ensure that it is sealed and matched with Aijiren instruments without failure. Strictly monitor the standard operating procedures of the production process to meet the requirements of stable quality and full traceability.

Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass£¬Aijiren Vials have a standard graduated write-on patch for easy filling and identification£¬Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals£¬Snap caps or aluminum seals ensure a secure seal for samples

Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short-term storage. Deactivation, MS Certification is also available.

The snap vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp or snap seals and no special tools are required to remove the cap. These vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

The snap-on vials produced by Aijiren are made of Type 1 borosilicate glass (Grade A, 33 expanded borosilicate glass), with transparent or amber color, or made of polypropylene. The snap vial can accept either aluminum snap seal or polyethylene snap cap. Very suitable for short-term storage.

• Widely used in HPLC applications, universally usable vials for almost autosamplers, include the one with robotic handing.
• Snap vials can be closed with either snap caps or crimp caps.
• Snap caps can be easy as push-on, pull-off by hand.
• Clear glass vials–made from USP Type I, Class A, 33Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51Borosilicate Glass.

Snap seal vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Aijiren produces 11mm snap top closures to provide more sealing for Snap Top Vial. 11mm snap neck vial is a kind of Autosampler Vial, which is a popular product of Aijiren. Aijiren’s Autosampler Vial is a star product, and 11mm snap top closures are even more full. Attention, Aijiren promised to use better raw materials, better machinery and equipment to ensure unified production.

The sample vial and caps have strict size standards and can be matched with various models of autosamplers such as Aijiren, Waters, Varian, and Shimadzu.

Snap Cap vials Wide-mouth vials are easy to fill and provide a larger target area for the autosampler needle. Suitable for most autosamplers, it can hold 12x32mm sample bottle format, high-quality 33 expanded borosilicate transparent glass type 1 (type A) or 51A amber glass uniform, flat bottom ensures that Vial can stand stably on the desktop.

Snap caps provide a secure seal that minimizes evaporation, even with volatile samples. Snap caps are often more convenient than crimp caps as they can easily be applied and removed by hand. An audible click ensures a secure seal has been formed and that the cap is correctly aligned. Snap/crimp vials can be closed with either snap caps or crimp caps.

11mm Crimp Neck Conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. 2ml clear glass vial with 0.3ml intergrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical.