Ptfe silicone septum for vial caps
Size: can be customized
Can be pre-slit for needle easy to puncture
Crimp Caps squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The crimp cap vial requires crimping tools to carry out the sealing process.
9mm screw autosampler vial is widely used in laboratory chromatographyanalysis. Aijiren as one of largest chromatography consumable supplier, supplies 9mm screw HPLC vial in wholesale price. This 9mm screw vial package can reduce screw vial mouth touch to prevent contamination of sample. At the same time, the package box can be used as a vial rock, it is save the cost. Welcome to inquiry us about chromatography consumable.
9mm screw autosampler vial is widely used in laboratory chromatography analysis. Aijiren as one of largest chromatography consumable supplier, supplies 9mm screw HPLC vial in wholesale price. This 9mm screw vial package can reduce screw vial mouth touch to prevent contamination of sample. At the same time, the package box can be used as a vial rock, it is save the cost. Welcome to inquiry us about chromatography consumable.
Testing water for Total Organic Carbon (TOC) is no longer exclusive to the environmental industry. With the latest USP methods, TOC is now a concern for any industry using Purified Water and Water for Injection. Aijiren Low Level TOC Vials are specially cleaned and packaged to reduce TOC to the lowest levels possible, assuring a low background for your testing.
Aijiren’s FTU Glass Vial with Screw Neck always use for Water Analysis, Labs often use FTU Vial to hold samples. There are 20ml and 30ml vials. The flat-bottomed design enables the vial to be stably placed on the storage cabinets and shelves in the laboratory. The FTU only has transparent glass, which can be intuitive. To see the changes of reagents in the vial, you can also choose the vial with a scale with a 10ml mark.
In the sample application of choosing the appropriate syringe filter and syringe, draw your sample into the syringe and place the filter on the syringe. If you are using a leur lock filter, make sure you have properly secured the filter into the syringe tip .Push a few drops through the filter with the syringe filter facing up and “top”. Place the filter in the overturned collection container and push the sample through the syringe filter by applying gentle positive pressure. The syringe filter to be cleared and the maximum To maximize sample throughput, remove the filter from the syringe and draw air into the syringe. Then reinstall the filter and push the plunger to force some air through the filter.
Material: Brosilicate Glass/1st hydrolytic class glass
Neck: 9mm Screw neck
Color: Amber and Clear
Septa: Pre-Slit, PTFE/Silicone
OEM & ODM Custom Service
Snap vial is manufactured from Type 1 borosalicate glass (Class A, 33 extended borosicate glass) and is available from transparent or scarlet, or polypropylene. Snap vial accepts both aluminum snap seal and polyethylene snap cap. Ideal for short-term storage. De-activation and MS authentication are also available.
Aijiren’s 9mm hplc vials are very suitable for Autosampler, especially Aijiren’s machines, because Aijiren’s 9mm hplc vials have a long neck to facilitate the grasping of instruments, and the bottom is flat and easy to place in the sampling area, and the accuracy of the thread is guaranteed Improved the sealing performance of 9mm hplc vials. In addition, Aijiren’s Cap and Septa have types that are convenient for Autosampler to puncture. Cap has a center hole, and Septa is very convenient for puncture.
These caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. Great for everything from liquids, to soaps, to macro-invertebrates.
The screw cap vial is easy to handle. Tightening the lid with your hand and a mechanical arm will exert mechanical force, which will squeeze the septum between the glass vial and the lid. The screw cap forms an excellent seal and mechanically fixes the septum in place during the piercing process. No tools are required for assembly.
9 mm screw top vial, 32×11.6 mm, clear glass, high recovery, borosilicate glass
1.5ml vial with 30ul reservoir for sample concentration and injection, no transfer to micro insert
If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.
Aijiren sample vials have excellent sealing performance, which can effectively avoid sample evaporation. The sample bottle and corresponding 11 mm aluminum cap can be easily combined with the crimp cap tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for sample bottles with white open caps and thick PTFE/silicone septa, they can be used as anhydrous and oxygen-free reaction bottles.
The size of 10ml Aluminum Crimp Caps with Headspace Vial produced by Aijiren is 22.5*46mm, and the glass types are divided into 5.0type and 7.0type. Since the headspace vial is suitable for gas chromatography, the tightness requirements of the vial are relatively high. Aijiren uses Aluminum Cap with Crimper and Decrimper to seal the vial.
Aijiren’s chromatography bottle has a wide-mouth crimp cap that provides a larger target area and improves the accuracy of the autosampler needle. Can be made of clear and amber glass. The label can be written area, can help the experimenter to distinguish the sample type.
Aijiren is a factory specializing in the production of Autosampler Vials, with professional production machinery and equipment and large-scale production factories. It is precisely because of such a strong production base that Aijiren can guarantee the production of large quantities of products. Aijiren has a considerable number of products in stock. The operation of multiple production lines also ensures the timeliness of customer orders.
Manufactured in state of the art moulding facility using high purity virgin polypropylene.
PP Material confirming to US FDA 21 CFR.
Used for storage of PCR reagents, enzymes and other diagnostics and biochemical reagents or sample.