PVDF-L 0.45 Syringe Filter

PTFE: is perfect for the filtration of gaseous or organic solvent-based samples and highly corrosive substances. Hydrophobic so provides chemical resistance to aggressive media and excellent temperature stability allowing an extended sampling range. If used with aqueous samples, the membrane usually requires pre-wetting (normally by using a small amount of alcohol). Can also be used to prevent moisture passing through air vents. pH range ~1-14.

PTFE is a hydrophobic membrane that is chemically resistant to almost all solvents. It can be used with corrosive media, such as strong acids, alcohols, alkalis, and aromatics. The unit is readily available, allowing simple, fast and reliable HPLC or GC analysis of ultra-clean small-volume samples. PTFE filters can also be used to prevent moisture from passing through the vents.

PES syringe filter membrane has the characteristics of high mechanical strength, it can handle high temperature liquid, and has a large flow rate (better than PTFE), and low protein binding force. With these functions, PES syringe filters can provide excellent performance for biological samples and culture media. The usable pH range is about 3-14.

Due to the high hydrophobicity of the PVDF membrane, it needs to be immersed in ethanol, methanol or other suitable solutions for activation. This product is only for scientific research by professionals, and must not be used for clinical diagnosis or treatment, or used for food or medicine, and must not be stored in ordinary residences. For your safety and health, please wear lab coats and disposable gloves for operation.

Disposable non-sterile syringe filter devices are designed to provide fast and efficient filtration, premium quality and economy. The membrane could be PTEF, PVDF, PES, Nylon, MES, PP, CA, and can be suitable for different situations.

Due to the high hydrophobicity of the PVDF membrane, it needs to be soaked in an appropriate solution such as ethanol before use to achieve the purpose of activation and make the membrane easier to bind proteins. This product is compatible with many dyes, such as Ponceau-S red, Coomassie brilliantblue, Sypro ruby, Transillumination, Toluidine blue, CPTS, Colloidal gold, India inkAmido black. Among them, after dyeing with dyes such as Ponceau and CPTS, the dyes can be washed off and the film can be used for further analysis; while dyes such as Coomassie Brilliant Blue, India ink, and amide black are irreversible, the film cannot be used after dyeing. For further analysis.

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. t. In HPLC analysis and IC analysis, syringe filters can be used to filter sample solutions, which is an important step in sample pretreatment.

Nylon has excellent flow characteristics, extremely low extractable level and mechanical stability, and can provide the best combination of physical parameters to meet the most stringent analysis requirements of 13mm, 25mm and 33mm diameters. Nylon’s natural hydrophilicity, high protein binding capacity and high dirt adsorption capacity are natural advantages.

These syringe filters feature a user-friendly design, allowing for convenient and hassle-free filtration. They are compatible with standard luer lock syringes, enabling simple attachment and detachment. The filters come pre-sterilized and individually packaged, ensuring convenience and minimizing the risk of contamination.

You can choose a PTFE needle-punched filter to improve the filtration efficiency in any area. They provide high-performance filtration through an application-centric design and can be used in various industries that process organic samples.

In order to filter the particles correctly, you need to find the right size filter. You should choose the diameter of the filter carefully. They usually have sizes of 13mm, 25mm and 30mm. Each of these has a different ability to hold particles. According to the sample size, you can choose the appropriate filter diameter. For example, a diameter of 13 mm can be used for 1-10 ml samples. Similarly, 25 mm PVDF syringe filters can be used for sample volumes of 10-100 ml. Their retention is less than 100 ml.

Our Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings.

Aijiren’s membrane materials are supplied by the best names in the industry and the ISO9000 certified manufacturing is carried out to the highest standards, in certified clean room conditions, using the latest manufacturing technology to ensure a high quality, consistent product. All the syringe filters are HPLC certified.

Cellulose acetate is a very low protein binding membrane that is ideal for aqueous based samples and biological samples. It is a lower protein binder than either polyethersulphone or PVDF membranes, but has a lower chemical resistance than regenerated cellulose (RC). CA is a strong membrane mechanically and hydrophilic.

Syringe filter is a small, disposable device used for filtration purposes in laboratories and other scientific settings. It consists of a plastic housing with a membrane filter at one end and a female luer lock or male luer slip connection at the other end, allowing it to be attached to a syringe.
The purpose of a syringe filter is to remove impurities, particulates, or unwanted substances from a liquid sample before it is injected or analyzed. The membrane filter within the syringe filter acts as a barrier, selectively allowing only certain particles or molecules to pass through while retaining larger particles.

Our expert staff is available via live chat and email to help you decide on the best membrane filter for your needs. Email us, and our helpful customer representatives will respond promptly—in just one business day or sooner. And if you still need help deciding on the right product, we’ll ship you a sample to ensure you receive the best membrane filter for your needs.

Polypropylene (PP) is recommended for one time use only with low vapor transmission. Polypropylene is a rigid plastic that is translucent. At room temperature, polypropylene exhibits excellent chemical resistance to acids, alcohols, and bases. Polypropylene is compatible with acetone, ethyl acetate, methanol, isobutyl alcohol, methanol, and methyl ethyl ketone. Polypropylene is incompatible with cyclohexane, ethers, dichlorobenzene, pentanes, methylene chloride, and trichlorobenzene.

In chromatographic experiments, the sample is placed on the chromatographic column for analysis after the sampler is injected. However, the inner core of the sampler and the chromatographic column is relatively thin. If there are large particles in the sample, it may cause the device to block , Need to use Syringe Filter for preliminary sample filtration treatment.

Components of PTFE Syringe Filters These syringe filters usually have hydrophobic PTFE filter media and are placed in glass fiber reinforced polypropylene. In order to obtain a higher filtering effect, there are two types of outlets, one is a male Luer sliding outlet, and the other is a female Luer lock inlet.

PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing.

When using vents, these syringe filters can prevent moisture from passing through. Usable pH range: 1-14. PTFE can be applied to: filtering organic solvents with strong chemical corrosiveness, filtering strong acid solvents, filtering alkali solvents, compatible with gaseous samples, and can handle high-temperature liquids.

Syringe filter is a quick, convenient and reliable filter tool used routinely in the laboratory.Because they don’t need to change the membrane and filter cleaning, it’s eliminating the complex and time-consuming preparation. It is widely used in the sample pre filtration, removal of particles, aseptic filtration of liquids and gases. It is the preferred method to filter small samples before loading into HPLC and GC ,and it is often used with disposable syringe.

PTFE Syringe Filters are universal filters that are inert to a wide variety of aggressive solvents and strong acids and bases. These syringe filters can also be exposed to high temperatures and are an excellent choice for HPLC sample preparation. We offer PTFE syringe filters in both their hydrophobic and hydrophilic states.

Aijiren PP syringe filter
Product Model: 25mm,0.22um Sterilization Independent Packaging
Application: sterilize and filter the aqueous solution
Operating temperature: 45¡ãC
Inlet pressure: bar (psi): 5.2 (75)
Wettability: hydrophilic
Filter membrane diameter: 25mm
Membrane aperture: 0.22um

Aijiren Tech Aijiren Syringe Filters are a comprehensive range of non-sterile disposable syringe filters for reliable sample preparation. Reproducible membrane quality and automated manufacturing processes ensure particulates are removed from each and every sample, extending analytical column lifetime and minimising injection port or valve damage.

UHPLC Precolumn Filter
• Economical protection against microparticles.
• Extend UHPLC column lifetime.
• Negligible effect on column performance.
• Universal fit—easily connects directly to any brand column.
• Leak tight to 15,000 psi (1,034 bar).
• Does not contribute to system backpressure.
• Does not contribute to band broadening.