Green 33mm PTFE Syringe Filter

Our syringe filters are made from high-purity polytetrafluoroethylene (PTFE) membrane for superior performance and durability. PTFE is an ideal material for HPLC applications with excellent chemical compatibility, low protein binding, and minimal analyte adsorption. This ensures sample integrity for accurate, reproducible results.

Disposable syringe filter devices are designed to provide fast and efficient filtration, premium quality and economy. The membrane could be PTEF, PVDF, PES, Nylon, MES, PP, CA, and can be suitable for different situations.

Syringe filter is a small, disposable device used for filtering liquids or gases.It consists of a plastic housing with a membrane filter at one end and a female luer lock or luer slip connection at the other end, which allows it to be attached to a syringe or other fluid delivery system.
Syringe filters are commonly used in laboratory and research settings to remove particles, microorganisms, or other impurities from samples before analysis or further processing. The membrane filter in a syringe filter acts as a barrier, allowing only the desired components of the sample to pass through while retaining any larger particles or contaminants.
The choice of membrane material depends on the nature of the sample and the substances to be filtered.

Our Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings.

Syringe filtration is a crucial technique in laboratory settings, playing a vital role in sample preparation for various analytical methods.

The PVDF Syringe Filter produced by Aijiren is made of high-quality raw materials. The filter membrane is very suitable for sample preparation and reagent filtration. Aijiren believes that the PVDF Syringe Filter can be integrated with water-based reagents, and the hydrophilicity ensures that the PVDF Syringe Filter can filter water-based reagents. success.

The 0.22um 0.45um Lab Use Reusable Syringe Filter With Printing finds application in diverse laboratory settings. It is suitable for pharmaceutical research, biotechnology, environmental analysis, food testing, and other scientific research fields.

Cellulose acetate is a very low protein binding membrane that is ideal for aqueous based samples and biological samples. It is a lower protein binder than either polyethersulphone or PVDF membranes, but has a lower chemical resistance than regenerated cellulose (RC). CA is a strong membrane mechanically and hydrophilic.

Polyethersulfone (PES):?Hydrophilic, stable in low pH, have low levels of extractables, and exhibit low protein binding, making them suitable for many aqueous and organic solvents. PES membranes allow higher liquid flow than PTFE. Temperature resistant. pH range ~3-14 (sometimes quoted as 1-14).

PTFE Syringe Filter is resistant to almost all corrosive chemicals, which makes PTFE syringe filters an ideal choice. However, the disadvantage of natural hydrophobic PTFE is that after many chemicals are diluted with water, the aqueous solution cannot pass through. Need to be wetted with water in advance.

UHPLC Precolumn Filter
• Economical protection against microparticles.
• Extend UHPLC column lifetime.
• Negligible effect on column performance.
• Universal fit—easily connects directly to any brand column.
• Leak tight to 15,000 psi (1,034 bar).
• Does not contribute to system backpressure.
• Does not contribute to band broadening.

PES syringe filter has the characteristics of hydrophilicity, low protein binding, high flow rate and good chemical stability. In addition, it also contributes to oxidation stability, high heat and low concentration of extractable elements. Aijiren’s PES syringe filters are ideal for ion chromatography, tissue culture filtration, protein, nucleic acid and high temperature liquid filtration. It helps you get accurate results in sensitive analysis of ionic analytes.

The Aijiren Tech Syringe Filter is a comprehensive non-sterile disposable syringe filter for reliable sample preparation. Reproducible membrane quality and automated manufacturing processes ensure particles are removed from all samples, extending the life of analytical columns and minimizing injection port and valve damage.

Polyvinylidene difluoride (PVDF):?designed for high tensile strength, high solvent resistance, and low protein binding, making them suitable for biomedical filtration, sterilization filtration, and HPLC sample preparation. pH range ~1-14.

Choice PES Syringe Filters Specifications
Membrane: HPLC certified
Maximum operating temperature: 100 ¡ãC
Housing: Medical grade, virgin polypropylene
Autoclave: Sterilize by dry heat at 121 ¡ãC for 15 minutes

They are also very useful in the protection of vacuum pump pipelines and have the qualities of high absorption and retention capacity. Due to their advantages, these syringes can be used in laboratory situations as well as industrial applications.

PVDF syringe filters have excellent chemical compatibility, mechanical strength and low extractability. In these filters, the maximum allowable housing pressure is 150 psi. It improves the filtering speed. These filters have high temperature resistance due to their materials. They have excellent flow rate and temperature stability.

Nylon membrane has high strong mechanical strength, chemical stability, can be tolerated by most organic solvents, extremely low in extractables, good thermal stability (up to 50¡ãC), natural hydrophilic and the majority of water solution filter characteristics. It more often applied to the common organic solvent HPLC mobile phase filtering.

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. Therefore, samples and solvents must be pre-filtered to remove particulate contaminants and protect the instrument.
In addition, chromatography commonly used in environmental analysis requires that no inorganic contaminants be introduced during sample pretreatment.

This nylon membrane can be used for alkaline blotting and fixation, but if fixing methods such as baking and ultraviolet rays are used, higher nucleic acid detection sensitivity can be obtained. Since the nylon membrane is a hydrophilic membrane, it does not need to be immersed in ethanol, methanol and other solutions for activation. This product is only for scientific research by professionals, and must not be used for clinical diagnosis or treatment, or used for food or medicine, and must not be stored in ordinary residences. For your safety and health, please wear lab coats and disposable gloves for operation.

Nylon has excellent flow characteristics, extremely low extractable level and mechanical stability, and can provide the best combination of physical parameters to meet the most stringent analysis requirements of 13mm, 25mm and 33mm diameters. Nylon’s natural hydrophilicity, high protein binding capacity and high dirt adsorption capacity are natural advantages.

Disposable syringe filters are widely used in labs for quick and efficient filtering, material purification or even sterilization for solutions <250mL, to avoid setting ups of Buchner filters or similar.

Syringe filter is a disposable filter unit designed to remove impurities from liquids or gases using a syringe as the fluid delivery system.
It consists of a plastic housing with an inlet and an outlet, and a filter membrane positioned between them.
The filter membrane is often made of materials such as polypropylene, polytetrafluoroethylene (PTFE), or nylon.
To use a syringe filter, the liquid or gas to be filtered is drawn into a syringe, and then the syringe is attached to the inlet of the syringe filter.

PTFE Syringe Filters consist of a polytetrafluoroethylene (PTFE) membrane and a polypropylene overmolded housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes.

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. Therefore, samples and solvents must be pre-filtered to remove particulate contaminants and protect the instrument.

Polypropylene (PP) is recommended for one time use only with low vapor transmission. Polypropylene is a rigid plastic that is translucent. At room temperature, polypropylene exhibits excellent chemical resistance to acids, alcohols, and bases. Polypropylene is compatible with acetone, ethyl acetate, methanol, isobutyl alcohol, methanol, and methyl ethyl ketone. Polypropylene is incompatible with cyclohexane, ethers, dichlorobenzene, pentanes, methylene chloride, and trichlorobenzene.

Our Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 25mm formats in virgin polypropylene housings.

In order to filter the particles correctly, you need to find the right size filter. You should choose the diameter of the filter carefully. They usually have sizes of 13mm, 25mm and 30mm. Each of these has a different ability to hold particles. According to the sample size, you can choose the appropriate filter diameter. For example, a diameter of 13 mm can be used for 1-10 ml samples. Similarly, 25 mm PVDF syringe filters can be used for sample volumes of 10-100 ml. Their retention is less than 100 ml.