Our 9 mm Wide Mouth Vials and Closures are our recommended screw thread vials. These vials are autosampler compatible and offer a 40% larger opening than 8-425 thread vials, simplifying pipetting and other routine functions. Aijiren Tech offers 9 mm screw thread vials in clear and amber glass, as well as polymeric options and mass spec quality glass.

Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications.  Screw Glass vial for autosampler instrument is made of borosilicate glass. Different vial mouth designs meet different actual needs. 

2ml snap autosampler is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass, and attach a writable label for sample identification.

The vial cap is made of high-quality polypropylene, and the septum is made of the highest-quality materials. The precise manufacturing tolerances and the controllable manufacturing environment ensure the high efficiency of product functions.

Due to the large amount of glass used in the vial neck, the snap seal vial is hard to break when the cap is removed. The neck finish of the snap seal is compatible with crimps and/or snap seals and does not require any special tools to remove the cap. These viars are recommended for short-term sample storage and non-volatile samples because seals are not as secure as crimp or thread seals.

Chromatographic autosampler vials are glass vials used for chromatographic autosampling in liquid chromatographs, gas chromatographs, mass spectrometers and other autosamplers and headspace samplers. Generally consists of a complete set of vial, cap and gasket. Its basic requirements are accurate volume, can withstand a certain pressure, good sealing performance, no adsorption effect on the sample.

Precision threaded sample bottles: 9mm threaded bottle mouth achieves leak-proof seal and extremely low bottle breakage rate when screwing on the cap.

Standard 8-425 screw neck autosampler vials (11.6x32mm) engineered from USP Type I borosilicate glass. Designed for precise sample containment in HPLC and GC analytical workflows, compatible with major brand autosamplers.

10-425 Wide-opening vials provide an increased target area for easier sample preparation and to reduce the chance of bent or broken needles during sampling,10-425 Vials are manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B borosilicate glass.

2ml Autosampler Vials 8-425 neck finish represents a hplc vials &gc vials, the vials a diameter of 8mm over the outside of the threads and a thread style of 425, vials has clear and amber, screw cap in lab most of the 2ml vials are 12x32mm.

Convenient 1.5mL/2.0mL 11mm snap ring autosampler vials (12x32mm) made from USP Type I borosilicate glass. Easy push-on snap design speeds up sample prep while maintaining excellent seal integrity.

The function of crimping top sample vials, Strict quality assurance provides dimensional consistency between batches, Optional ceramic write points with filling marks, Certified and fully compatible with autosampler.

The Lab Use 1mL Shell Vial is a compact and convenient tool designed for laboratory sample handling. With a 1mL capacity, these shell vials are ideal for storing and transporting small liquid samples. They are made of high-quality glass, ensuring excellent chemical resistance and visibility for easy sample inspection.

Black PP material with leak-proof closed-top design. Septa-free structure prevents sample contamination. Fits standard 4ml vials.

The micro insert is designed to ensure precise and accurate sample dispensing. Its tapered bottom allows for smooth and controlled sample aspiration and injection, minimizing the risk of sample loss and improving the reproducibility of your HPLC analysis. Achieve precise results with confidence using our Lab Use Micro Insert.

Chromatography vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling. Its basic requirements are accurate volume, ability to withstand a certain pressure, good sealing performance, and no adsorption to samples.

The transparent glass threaded sample bottle is 2mL, 12x32mm, and has an advanced sample bottle sealing system. The screw vial can prevent the septum from being pressed in, and can provide a stop point for the bottle cap to prevent over-tightening or over-tightening, and it can provide the best and consistent seal every time.

Approximately 40% larger than a normal small neck
The increase of the target area makes sample preparation easier
Large diameter is specially designed for automatic samplers such as Waters
The large-mouth design reduces the probability of bending and damage of the sample needle during the needle sampling process

2ml 9mm Screw Top Autosampler Vials are cleaned and packaged in a certified Class 10,000 clean room according to a designed process, developed to eliminate chromatographic errors associated with vials. For Chromatography vials, 2ml 9mm Screw Top Autosampler Vials is the most commonly vial in laboratories. 2ml 9mm Screw Top Autosampler Vials are more leak-tight and easy for the experimenter to operate.

2ml Snap Top HPLC Vial is made of Type 1 borosilicate glass. Comparing with 9mm screw vial, this 2ml Snap Top HPLC Vial mouth is wider opening. So 2ml Snap Top HPLC Vial is easier to fill and provides a larger target area for the autosampler needle. That means, the 2ml Snap Top HPLC Vial can protect the needle.

The 9mm high recycling vial is a new vial specially designed by Aijiren for precious samples in the laboratory. Many times the autosampler will leave sample residue in the vial when it is injecting samples. If the sample is precious, this residue is undoubtedly a waste. High-recovery vials can avoid this problem.

Capacity: 1.5mL
Thread: 8-425 ND8
Dimensions: Neck height 11.6mm × Total height 32mm
Featured Models:

V847-S: Silanized amber bottle with writing area

V827: Clear bottle with writing area

V817: Clear standard bottle

The Aijiren sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw-capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

The 150ul, 250ul, and 300ul Micro Inserts for HPLC Autosampler Vials are essential accessories designed to enhance the functionality of HPLC sample vials. These micro inserts are made of high-quality materials, such as borosilicate glass, providing excellent chemical resistance and minimizing sample contamination.

Aijiren strongly recommends to use only ready-made sealing caps, whose lining matches the bottle cap completely, and has been automatically inserted under strict sanitary conditions.

It is wider than the ordinary Cap, and the Aluminum Cap has good sealing performance. The 5.5mm Center Hole is also convenient for the automatic injection needle in and out. It works very well with Hand Crimper.