1ml 8mm PE Plug Clear Shell Vial

HPLC autosampler vials  are generally categorized by vial diameter, vial height, and thread finish. Clear glass and amber glass have similar inert properties. Amber glass is used to protect sensitive samples from UV light. Markings on the vials provide sample identification information.

9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic are samplers
2ml 12*32mm clear borosilicate glass vial,with a write-in patch; high quality polypropylene caps, ptfe / silicone septa can be pre-slit to easy needle penetration

The Aijiren sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

The Aijiren 15x45mm vials have a 13-425 GPI thread and can hold up to 4ml of sample. Use the 13 x 425 caps with septa for use as sample vials and with diffusion caps for wash vials. With closed top screw seals, these vials can also be used as storage vials.

Aijiren vials combine the robustness of a Glass vial with the benefits of a glass micro-insert. The glass micro-insert is firmly seated in the cone of the vial and its edges slightly exceed the rim of the vial, ensuring that the septum seals tightly to the glass.

2ml Autosampler Vials 8-425 Neck surface finish is representative of hplc vials &GC vials, vials have a screwed outer diameter of 8 mm, thread style 425, vials are available in clear and amber, threaded caps in Lab most 2ml vials are 11.6x32mm

Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

11mm Natural Snap-top PE Caps, 6mm Centre Hole
White PTFE/Red Silicone Septa 11*1mm
for 11mm Glass Snap Top Vials

PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

The 9mm high recycling vial is a new vial specially designed by Aijiren for precious samples in the laboratory. Many times the autosampler will leave sample residue in the vial when it is injecting samples. If the sample is precious, this residue is undoubtedly a waste. High-recovery vials can avoid this problem.

Micro-insert, also known as a micro-insert vial or microvial insert, is a small glass or plastic container that is used in chromatography and analytical techniques to enable smaller sample volumes to be analyzed in standard-sized vials.
Micro-inserts are designed to fit inside standard-sized sample vials, which are typically larger in size. They are used when the available sample volume is limited or when the sample concentration is low. By using a micro-insert, the sample volume can be reduced, allowing for more efficient analysis and minimizing the risk of sample loss or evaporation.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.

HPLC autosampler vials are generally categorized based on vial diameter, vial height, and thread finish. Clear glass and amber glass have similar inert properties. Amber glass is used to protect sensitive samples from UV light. Markings on the vials help provide sample identification information. Autosampler vials can be used to inject samples from an autosampler.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Glass vials are available in 2 ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

2ml Snap Top HPLC Vial is made of Type 1 borosilicate glass. Comparing with 9mm screw vial, this 2ml Snap Top HPLC Vial mouth is wider opening. So 2ml Snap Top HPLC Vial is easier to fill and provides a larger target area for the autosampler needle. That means, the 2ml Snap Top HPLC Vial can protect the needle.

Aijiren understands that 2ml HPLC vial are as important as chromatography columns or instruments. As a result, Aijiren 2ml HPLC sample vial are designed to meet the highest standards you can expect. So 2ml HPLC vial can be exported to 32 countries.

Glass autosampler vial, 4ml, 15mm x 45mm, used with 13-425 screw caps.
Ideal for general laboratory use and sample storage.
Chemically inert caps suitable for most chromatography and storage applications.
Top grade PTFE/silicone septa used for cleanliness.

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

The automatic vial is made of high quality raw materials. It has high temperature resistance and corrosion resistance. The septum of the autosample vials is made of high quality materials to ensure proper function and is widely used in multiple injection or longer injection cycle designs as well as gas and liquid chromatographs.  

The Aijiren sample vial is sealed and effectively avoids sample evaporation. The 11 mm aluminum cap corresponding to the vial can be easily and quickly combined with the jaw capping tool. Vials can withstand heat and pressure and can also be used for chemical reactions. It can be used as an anesthermal and oxygen-free reaction viale, especially for white open caps and thick PTFE/silicon septum viars.

11mm Snap Top Closures are made of PP. The translucent Cap design allows users to see the fixed card slot. The inside of the Snap Cap has 4 protrusions for fixing in the lateral groove of the Vial Neck.

Neck Type: Screw, Snap / Crimp
Neck Diameter: 8-425, 9mm, 10-425, 11mm
Color: Clear / Amber
Graduated: with or without
Material: Borosilicate Glass