13mm Glass Autosampler Vials from Aijiren

The Aijiren 15x45mm vial has a 13-425 GPI thread that can hold up to 4ml of samples. Use a 13 x 425 cap with a septum when using it as a sample vial, or a diffusion cap for a cleaning vial. Sealed screw seals allow these vials to also be used as storage vials.

4ml wash vials for autosampler
with 13-425 screw caps and septum
Clear and amber borosilicone glass for choose

Aijiren Sample Storage Vial is usually used for environmental analysis. Clear Glass Vial can better see the state of the sample. Amber Glass Vial can withstand ultraviolet light and protect the chemical components in the sample that are sensitive to ultraviolet light.

Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

Glass autosampler vial, 4ml, 15mm x 45mm, used with 13-425 screw caps.
Ideal for general laboratory use and sample storage.
Chemically inert caps suitable for most chromatography and storage applications.
Top grade PTFE/silicone septa used for cleanliness.

The 4ml screw neck glass vial produced by Aijiren is often used in Autosampler. The 4ml 13mm opening is convenient for automatic injection needle injection. The Cap has a center hole. PTFE and Silicone are compounded on both sides to ensure that one side of PTFE faces the reagent inside Vias, ensuring that the stability of the reagent is not destroyed.

4ml 13-425 hplc vial with screw cap is belong to HPLC autosampler vials. The classification of HPLC autosampler vials is generally done based on the diameter of the vial body, vial height, and thread finish. Clear glass and amber glass present similar inertness. 4ml 13-425 hplc vial with screw cap is compatible to SHIMADZU instrument. Autosampler needle pierces through the cap during injection and withdraws the required amounts of analyte from the sample vial.

The 13-425 HPLC Vial produced by Aijiren can be applied to the Autosampler with a 13mm diameter automatic grabbing arm. The 13-425 Screw thread is also easier to grab and not fall off. It is a high-quality choice for HPLC experimental analysis.

4 mL screw top vials, also called waste vial or wash vial, usually used to wash the needle of autosamplers. Our 4ml Vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements.
The specifications are international common standards, which are fully compatible with the autosamplers of Aijiren, Worcester, Shimadzu and Thermo Fisher. The product is clean, dust-free packaging, no additional cleaning is required, and it can be used directly on the machine

Aijiren’s 4ml 13-425 Vial for HPLC is a popular product. Aijiren uses high-quality borosilicate glass to make Via, good PP plastic to make the lid, Silicone’s Septa, these excellent accessories combine to become Aijiren 4ml 13-425 screw vial.

4ml Screw Vials is also called Wash Vial for Cleaning the Needles
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: HPLC and GC system
Volume: 4ml (standard volume)
Dimensions: 15 x 45mm
Neck Diameter: 13mm
13mm Black Screw PP Cap with 8.5mm Centre Hole or Closed-top
PTFE/Silicone Septa, 13*1.5mm
Qty/Pack: 100pcs/pack

4ml 13-425 HPLC vial with cap is used for chromatography system. In the experimental system, the automatic sample system has the high-tech innovation ability, can improve the productivity of the chemical laboratory, and achieve excellent results in efficiency, safety and replicability. Therefore, 4ml 13-425 HPLC vial is also of great concern.

The 13-425 vial provided by Aijiren are all made of borosilicate hydrochloric acid glass, which is extremely inert and difficult to react with chemical reagents, which can effectively ensure the accuracy of the experimental results.

4ml 13-425 screw thread Vial Made of Clear, Type 1 Class A or Amber, Type 1 Class B borosilicate glass,Requires the use of 13-425 closures and 13mm septa. For storage purposes also available with closed top screw seals, Available as closed or open top screw seals with13-425 thread.

Aijiren 13-425 glass vials with screw cap are customized products based on your experimental requirements for vial types, writing areas, logos and other individual parameters. Aijiren 13-425 glass vials with screw cap is fully compatible with SHIMADZU autosamplers. Compared to crimp top vials, 13-425 glass vial with screw cap can easily tighten the lid without the help of a tool. Polypropylene threaded cap with PTFE septa, can form a good seal on the vial, improve work efficiency.

Aijiren is a supplier of 13-425 Screw Neck Vial. Our factory specializes in the production of 13-425 Screw Neck Vial for chromatography. We use good raw materials to make 13-425 Screw Neck Vial and sell them at a cheap price while ensuring quality. Aijiren’s high quality and low price have satisfied many customers.

1. The glass adopts high-quality borosilicate glass tube, with low free ion content, low expansion coefficient and very high chemical resistance.
2. The unique thread design can ensure the consistency of the seal.
3. Strict quality assurance provides dimensional consistency between batches.
4. It is suitable for autosampler of Aijiren, Shimadzu, Waters, CTC/Leap and other companies.

Red PTFE / white silicon separator + black cap without holes, 15x45mm vial for 4ml screw top vial has 13-425 GPI thread, can hold up to 4ml samples. Use a 13 x 425 cap with a septum when using it as a sample vial, or a diffusion cap for a cleaning vial. Sealed screw seals allow these vials to also be used as storage vials.