The Aijiren 15x45mm vials have a 13-425 GPI thread and can hold up to 4ml of sample. Use the 13 x 425 caps with septa for use as sample vials and with diffusion caps for wash vials. With closed top screw seals, these vials can also be used as storage vials.

The PP cap will puncture with far less force than needed to puncture a PTFE/Silicone septa, thus minimizing instrument wear and tear as well as downtime. The septa are not resealable and are intended for single use.

Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersability of materials, allowing you an unhindered view of the solution. Our vials come in 2 ml. Each pack contains 100 glass vials, along with 100 caps lined with septa.

Features of the Crimp Top Sample Vial
Rigorous quality assurance ensures consistency of dimensions between lots
Optional ceramic writing spot with fill mark
Full warranty compatibility certification with autosampler

1. Septa and slit septa are available.
2. Normal Available cap color is Black, other special colors can be also produced.
3. Pre-assembled caps and septa are convenient and minimize contamination from handling.
4. Phenolic caps can be autoclaved.

Autosampler vials can be used to inject samples from an autosampler. Autosampler vials are available in a variety of sizes, with 2 mL vials being the most common size. During the injection process, the autosampler needle pierces the cap and extracts the desired amount of analyte from the vial. There are different types of vials for chromatography applications.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

The crimp vials produced by Aijiren are made of transparent or amber type 1 borosilicate glass or polypropylene. Requires crimper and lid opener. Very suitable for long-term storage. Deactivation and MS authentication can also be used.

High recovery vials are optimal for manual and automated compound or biological sample applications. High Recovery Vials allow maximum sample extraction without need for separate inserts

The automatic sample vial is produced from high-quality raw materials. It has high-temperature resistance and corrosion resistance. Controlled manufacturing environment quality and service have won the trust of customers.

The 4ml 13-425 Screw Thread Autosampler Vial prioritizes safety and security in sample handling. The borosilicate glass material is non-reactive, ensuring the integrity of the sample and preventing any unwanted interactions.

Suit for: 9mm Short Thread Vials
Caps Material: polypropylene
Cap Diameter: 9mm
Cap Features: 6mm Centre Hole or Closed Top
Septa Material: PTFE / Silicone
Septa Feature: Pre-slit I or X
Septa diameter: 9mm
Septa Thickness: 1mm

Autosampler vial, also known as a sample vial or injection vial, is a small container used for storing and handling samples in automated sampling systems.These vials are designed to fit into autosamplers, which are instruments used in analytical chemistry to automatically inject samples into analytical instruments such as gas chromatographs (GC) or liquid chromatographs (LC).
Autosampler vials play a critical role in automated sample handling and injection processes. They provide a secure and convenient way to store samples, protect them from contamination, and facilitate the precise and reproducible injection of samples into analytical instruments.

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap, sample vial has Transparent, amber, transparent with scale writing, and amber with scale writing are available for selection, suitable for various models of autosamplers such as Aijiren, Waters, Varian and Shimadzu.

Chromatography sample vial is a glass vial used by automatic samplers and headspace samplers such as liquid chromatography, gas chromatography, mass spectrometry, etc. for chromatographic automatic sampling. Its basic requirements are accurate volume, ability to withstand a certain pressure, good sealing performance, and no adsorption to samples.

Clear Glass Screw Thread Vials are 2mL, 12x32mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.

The micro insert is designed to ensure precise and accurate sample dispensing. Its tapered bottom allows for smooth and controlled sample aspiration and injection, minimizing the risk of sample loss and improving the reproducibility of your HPLC analysis. Achieve precise results with confidence using our Lab Use Micro Insert.

Vials are manufactured in clear type 1 class A or amber type 1 class B borosicate glass. 10-425 screw fasteners and 10mm septum must be used. See Assembly Caps and Septum Limited volume micro-insert for wide opening 10-425 vial.

Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand. A audible click ensures a secure seal has been formed and that the cap is correctly aligned. Precision-formed neck improves autosampler handling.

 9mm Screw conical micro-vial for lab chromatography experiment, the micro-vial size is 11.6x32mm.  High quality glass vial for HPLC/GC analysis. 0.3 ml clear or amber  glass micro insert fixed in 2ml glass vial.

Micro-insert, also known as a micro-insert vial or microvial insert, is a small glass or plastic container that is used in chromatography and analytical techniques to enable smaller sample volumes to be analyzed in standard-sized vials.
Micro-inserts are designed to fit inside standard-sized sample vials, which are typically larger in size. They are used when the available sample volume is limited or when the sample concentration is low. By using a micro-insert, the sample volume can be reduced, allowing for more efficient analysis and minimizing the risk of sample loss or evaporation.

Aijiren is a company that has been engaged in the production of HPLC vial with Cap for more than ten years, and we are also a supplier, selling our HPLC Vial with Cap at the factory price.
HPLC 2ml Vial is mainly made of two glasses, Clear glass and amber glass present similar inertness. Amber glass is used for avoiding exposure of sensitive samples from UV light. The markings on the vials are useful for sample identification information. The HPLC vials can be suitable employed to inject samples from an autosampler. They come in variety of sized, 2mL vials being ubiquitously used.

Aijiren’s hottest 8-425 2ml Screw HPLC Vial with Cap have been introduced. Aijiren uses high-quality raw materials to make 8-425 2ml Screw Vial with Cap. Customer satisfaction and praise have made Aijiren one of the largest laboratory consumables producers in southern China. First, Aijiren will stick original intention to ensure the quality of 8-425 2ml vial.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Amber glass vials are available in 2ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

2ml sample vial s equipped with a silver aluminum cap that has an ND11 (Narrow Diameter 11mm) size that cap is designed to fit the vial securely and provide a seal to prevent leakage or contamination.
The silver aluminum caps are designed to provide a secure closure for the vial, ensuring that the sample inside remains sealed and protected from contamination or leakage.
Overall, the combination of a 2ml sample vial with silver aluminum caps provides a reliable and convenient solution for storing and preserving small liquid samples in a laboratory or industrial environment.