Aijiren 2ml HPLC Vials for Sale

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

Aijiren provide 1mL 8x40mm Shell Vial Kit.Suitable for use over a wide temperature range, these 1ml vials are extensively tested to ensure they meet the needs of the end user. Subject to laboratory testing to ensure defined quality standards. Manufactured from the highest quality borosilicate glass.

11mm vials for GC and HPLC. Vials have a 40% larger opening than standard opening aluminum seal vials. Crimp vials are manufactured of Clear or Amber borosilicate glass.

The Aijiren sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw-capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

4ml 13-425 glass vial is finished in standard 13-425 screw, so the 13mm wide opening plastic cap is compatible with this glass vial. 13mm screw plastic cap is equipped with PTFE/silicone septa.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

HPLC autosampler vials  are generally categorized by vial diameter, vial height, and thread finish. Clear glass and amber glass have similar inert properties. Amber glass is used to protect sensitive samples from UV light. Markings on the vials provide sample identification information. Autosampler vials can be used to inject samples from an autosampler.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.
The vial cap is made of high-quality polypropylene, with precise manufacturing tolerances and a controllable manufacturing environment. The gasket is made of the highest quality PTFE/silicone to ensure the high efficiency of the function.

Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications. 2ml Autosampler Vials 8-425 Neck surface finish is representative of hplc vials &GC vials

Autosampler vials are available in a variety of sizes, with 2 mL vials being the most common size. During the injection process, the autosampler needle pierces the cap and extracts the desired amount of analyte from the vial. There are different types of vials for chromatography applications.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

  The 11mm snap vial is specially designed and produced to ensure that it is sealed and matched with Aijiren instruments without failure. Strictly monitor the standard operating procedures of the production process to meet the requirements of stable quality and full traceability.

Micro-Inserts allow for maximum sample recovery and easier sample removal when combined with autosampler vials.

Flat base inserts can accommodate more sample volume than polyspring or pulled point conical inserts.

Caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate and is great for nail polish remover and higher concentration acids & alkalis. Good for non-oil products filled at room temperature. Because this lining system is paperless, your samples will not be contaminated with fiber or paper particles from the closure. Available in Phenolic caps.

I250, I300 Vial Inserts
250ul, 300ul Volumn
Flat Bottom
Clear Glass

Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly. 

2ml Autosampler Vials 8-425 neck finish represents a hplc vials &gc vials, the vials a diameter of 8mm over the outside of the threads and a thread style of 425, vials has clear and amber, screw cap in lab most of the 2ml vials are 12x32mm.

The neck finish of 2ml Crimp Vial allows the use of standard aluminum seals. Surface treatment eliminates the need for crimping or capping. Designed for use in autosamplers. Choose from clear or amber type I borosilicate glass. The ID design combines the StepVial function, which can accurately center the limited volume of the insert on the bottleneck of the sample. A scaled marking point can be provided.

HPLC autosampler vials are generally categorized based on vial diameter, vial height, and thread finish. Clear glass and amber glass have similar inert properties. Amber glass is used to protect sensitive samples from UV light. Markings on the vials help provide sample identification information. Autosampler vials can be used to inject samples from an autosampler.

Snap Top 2ml HPLC Vials can accommodate 250uL Micro-inserts,The specifications of Micro-insert are 29*5.7mm, 31*5.7mm, and 31*6mm. You can choose Micro-insert according to your needs. This is more helpful for HPLC analysis of precious samples, which can save samples without causing waste.

Micro-insert, also known as a micro-insert vial or microvial insert, is a small glass or plastic container that is used in chromatography and analytical techniques to enable smaller sample volumes to be analyzed in standard-sized vials.
Micro-inserts are designed to fit inside standard-sized sample vials, which are typically larger in size. They are used when the available sample volume is limited or when the sample concentration is low. By using a micro-insert, the sample volume can be reduced, allowing for more efficient analysis and minimizing the risk of sample loss or evaporation.

Suitable for 11mm 2ml Crimp Neck Vials & 20mm Headspace GC Vials
Caps Material: Aluminum
Use Together with PTFE/Silicone Septa or Rubber Stopper
Color: Metal Silver
Vial Septa & Rubber Stopper and Crimpers are also Provided

Aijiren specializes in the production of Autosampler Vials, has its own production plant, and has purchased a large number of production equipment for assembly line production. At present, Aijiren has become the largest manufacturer of chromatographic consumables in southern China. Among them, Autosampler Vials is Aijiren’s most important product and the most customers. Products needed.

Transparent viale, 33-extended borosicate glass USP type I, Class A
Step-by-step write marking spot area, 0.5, 1.0, and 1.5ml
Strict quality control to ensure a consistent size of each lot of items.
Flat bottom to ensure consistent matching between the vial and the true neck 6mm of the standard glass insert.
Caps are made of high-quality polypropylene to meet accurate manufacturing tolerances
Septum is made of the highest quality materials to ensure proper functioning

The 10-425 vial was the original wide mouth to replace the 8-425 screw vial. Today, it is recommended to use a 9mm wide-mouth screw thread vial. This is because it is more versatile and compatible with autosamplers without sacrificing a wide mouth for pipette operation.

4 mL screw top vials, also called waste vial or wash vial, usually used to wash the needle of autosamplers. Our 4ml Vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements.
The specifications are international common standards, which are fully compatible with the autosamplers of Aijiren, Worcester, Shimadzu and Thermo Fisher. The product is clean, dust-free packaging, no additional cleaning is required, and it can be used directly on the machine