2ml PP clear short thread sample bottle with tape scale

GL45 Screw 100ml Reagent Bottle is a type of laboratory glassware commonly used for storing and dispensing chemicals or reagents in scientific and research settings.
It is designed with a standard GL45 screw cap, which ensures a secure seal and prevents any leakage or contamination of the contents.
he bottle is made of high-quality borosilicate glass, which is resistant to thermal shock, chemical reactions, and corrosion.
This makes it suitable for a wide range of applications, including the storage of acids, bases, solvents, and various other liquid reagents.

Aijiren’s 2ML Crimp Top HPLC Vial can be used with Micro-Insert to hold a small amount of samples to be tested, or precious samples. Put the sample into the Micro-insert, put the Micro-insert into the 2ml Crimp Autosampler Vial, fix the Cap with Crimper, and then put it into the Autosampler for testing.

Aijiren is committed to ensuring the safety and integrity of the analyzed samples. Aijiren provides an innovative 10mm 2ml Hplc screw Vials to ensure that all experimental data during the separation process are consistent. 10-425 Screw Vials are the best choice for the latest autosamplers. The standard opening vial is made of borosilicate glass and has a maximum filling volume of 2ml.

Aijiren¡¯s PP syringe filter uses a hydrophobic polypropylene membrane, which has stable physical and chemical properties, good compatibility, low protein adsorption, and is suitable for filtration of aqueous solutions and most solvents. Commonly used to filter biological samples, solvents, deionized water and reduce biological load, the hydrophobic PP filter membrane is particularly good for gas filtration. The product was sterilized by dry heat at 121¡ãC for 15 minutes.

Aijiren Sample Storage Vial is usually used for environmental analysis. Clear Glass Vial can better see the state of the sample. Amber Glass Vial can withstand ultraviolet light and protect the chemical components in the sample that are sensitive to ultraviolet light.

15-425 Screw storage vials are suitable for the packaging of various pharmaceutical intermediates, high value-added chemicals, chemical reagents, biological reagents, cosmetics, essences and oils, etc. It is suitable for long-term storage and transportation for products, and has excellent sealing performance.

Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersability of materials, allowing you an unhindered view of the solution. Our vials come in 2 ml. Each pack contains 100 glass vials, along with 100 caps lined with septa.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Amber glass vials are available in 4ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

Aijiren prepared a product booth at the exhibition to showcase Aijiren’s products, and show Aijiren’s product types and product quality to customers and buyers. Aijiren packed several products into packaging bags, which involved different types of products. Both closures and vias are products of Aijiren. Aijiren is committed to helping customers conduct convenient chromatography experiments.

20mm Crimp Caps squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The crimp cap vial requires crimping tools to carry out the sealing process.

These screw neck vials feature a 4ml capacity, providing ample space for storing liquid or solid samples. The screw neck design allows for easy and secure sealing, preventing leakage and contamination. The vials have a wide opening, facilitating convenient sample loading and retrieval.

The screw caps produced by Aijiren can have an opening for the autosampler and standard additions, or they can have a solid top for storing samples. A polypropylene cap and film are also available. These pierceable screw caps are designed for one-time use, and because there are no caps and seals to assemble, the sample preparation time is reduced.

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.

13 mm 0.22 um syringe filters come in various sizes, pore sizes, and materials to suit different applications. It is important to select the appropriate filter based on the type of sample, the desired filtration efficiency, and the compatibility of the filter material with the solvent or solution being filtered.Syringe filters can remove particulate matter, debris, aggregates, colloids, bacteria, and other contaminants that may interfere with the analysis.

The Silicone/PTFE Septa produced by Aijiren uses high-quality raw materials and an exclusive compounding process. This process does not require any adhesives to compound Septa and Silicone to achieve no cracking, no falling off, and a perfect fit for autosampler vial and antosampler.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

The glass of the reagent bottle has a low thermal expansion coefficient and can be autoclaved repeatedly (resistance to 140¡ãC). With scale and white enamel marking area, it is sturdy and durable. Comply with ISO GL 45 screw standard, compatible with ISO R115 and DIN 168 standards. Polypropylene (PP) external thread cap with O-shaped anti-drip ring, replaceable.

The Aijiren sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

2 ml borosilicate glass vials are commonly used for storing water and other liquids. Borosilicate glass is known for its high resistance to thermal shock, meaning it can withstand rapid temperature changes without cracking or breaking. It is also highly resistant to chemical corrosion, making it suitable for storing a wide range of substances, including water.Borosilicate glass vials are available in clear or amber colors.Borosilicate glass vials are available in clear or amber colors

Headspace Vials Available from Aijiren Tech. Headspace vials are available in volumes from 6 mL to 20 mL in clear glass. Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

crimp vial is compatible with all 2mL vial autosamplers, 2mL, 11.6x32mm.11X1mm Teflon/silicone septa, 11mm crimp top sample vials and micro-inner tubes, vapor/liquid vials

Aijiren’s 4ml HPLC Vial is made of borosilicate hydrochloric acid glass with high inertness. Amber glass can protect light-sensitive samples from the influence of sunlight. The vial made of this glass can also avoid corrosion by chemical reagents.

The Aijiren Tech Syringe Filter is a comprehensive non-sterile disposable syringe filter for reliable sample preparation. Reproducible membrane quality and automated manufacturing processes ensure particles are removed from all samples, extending the life of analytical columns and minimizing injection port and valve damage.