12*32mm Amber Glass Vial

Polypropylene caps are known for good impact strength, cost effectiveness, and pliability. They can be remelted after they are formed. Aijiren Polypropylene cap is widely used in chromatography analysis.

These vials are a good choice for the latest autosamplers. With an emphasis on improving sample security and integrity, we offer innovative 9mm closures and 9mm screw top vials for consistent productivity across all separations.
Standard opening screwed viars are manufactured from borosicate glass and the maximum filling volume is 2 ml.

1.5ml 9mm Screw Neck Vial for automatic samplers is made of low metal type 33 and 51 COE borate glass to prevent sample instability or leaching. By selecting the cap and pad, we provide the best sealing solution for the sample.

The Autosampler Vial produced by Aijiren is often used in autosamplers. Whether it is Aijiren or other brands of autosamplers, Aijiren Autosampler Vial can be perfectly adapted. It is precisely because of this that Aijiren Autosampler Vial can be so well-known and become A well-known manufacturer of chromatography consumables in the world.

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials for consistent productivity on every separation.
Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml.

The 9mm high recycling vial is a new vial specially designed by Aijiren for precious samples in the laboratory. Many times the autosampler will leave sample residue in the vial when it is injecting samples. If the sample is precious, this residue is undoubtedly a waste. High-recovery vials can avoid this problem.

9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic are samplers
2ml 12*32mm clear borosilicate glass vial,with a write-in patch; high quality polypropylene caps, ptfe / silicone septa can be pre-slit to easy needle penetration

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap, sample vial has Transparent, amber, transparent with scale writing, and amber with scale writing are available for selection, suitable for various models of autosamplers such as Aijiren, Waters, Varian and Shimadzu.

Screw thread vials and caps provide low evaporation, reusability, less hand injury during manipulation than crimp seals and require no special tools. All screw threads vials and caps are differentiated by their thread finish as defined by the Glass Packaging Institute, GPI. For screw thread vials, a two part number is assigned. For example, 8-425 neck finish represents a vial with a diameter of 8 mm across the outside of the threads and a thread style of 425. Screw thread vials and caps are more expensive than crimp seals.

Caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate and is great for nail polish remover and higher concentration acids & alkalis. Good for non-oil products filled at room temperature. Because this lining system is paperless, your samples will not be contaminated with fiber or paper particles from the closure. Available in Phenolic caps.

Aijiren is a supplier of 2ml 9mm Screw HPLC Vials. Our factory specializes in the production of vials for chromatography. We use good raw materials to make vials and sell them at a cheap price while ensuring quality.
The 2ml 9mm Screw HPLC Vials provided by Aijiren can be added with a writing area, which is convenient for customers to mark
samples during experiments and to distinguish samples. Aijiren’s 2ml 9mm Screw HPLC Vials also accept logo customization. If
the customer needs, we can print the customer’s brand logo on the vial. We provide customized services to facilitate customer needs. If you need 2ml 9mm Screw HPLC Vials or customized service, please contact us.

The steep conical High recovery interior bottom provides exceptional downward drainage while allowing maximum retrieval of contents by syringe. High recovery Vials are perfect for specialty pharma, biotech, pharmaceutical and diagnostics packaging applications.

1.5 ml vials from Aijiren Technology, Inc with high quality and favorable price. Zhejiang Aijiren is a manufacturer of Laboratory consumables. We supply autosampler vials, septa and caps at factory price. 9mm Short Thread Vials ND9 can be used for GC and HPLC.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

The non-pre-slit septas help to reduce carryover from vial to vial because the resealing characteristics of the septum act as a squeegee to wipe solution from the outside of the needle. Typically, a non-slit septum exhibits resealing capabilities for a limited number of needle punctures but for long-term storage in the vial, using a new non-punctured septum is best practice.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Glass Screw Vials ND9mm for HPLC, Clear & Amber, with /without Patch
High Recovery Glass Screw Vials ND9mm, Clear & Amber, with /without Patch
0.3ml Glass Screw Vial integrated with Micro-insert, Base Bonded, Clear & Amber, with /without Patch
PP Screw Vials ND9mm, Clear & Amber
0.3ml PP short Screw Micro Vials, Clear & Amber

2ml 9mm Screw Top Autosampler Vials are cleaned and packaged in a certified Class 10,000 clean room according to a designed process, developed to eliminate chromatographic errors associated with vials. For Chromatography vials, 2ml 9mm Screw Top Autosampler Vials is the most commonly vial in laboratories. 2ml 9mm Screw Top Autosampler Vials are more leak-tight and easy for the experimenter to operate.

Screw thread closures?N9?(9mm)?2ml vials and closures?are?universally suitable?on most autosamplers,?convenient?in handling and available in a broad?selection of different cap colors and septum materials. They?fulfill all requirements with regard to?tightness?and?analytical?purity?for GC as well as for HPLC. Due to the relatively thin?septa penetration is safe and easy.

9mm screw autosampler vial is widely used in laboratory chromatographyanalysis. Aijiren as one of largest chromatography consumable supplier, supplies 9mm screw HPLC vial in wholesale price. This 9mm screw vial package can reduce screw vial mouth touch to prevent contamination of sample. At the same time, the package box can be used as a vial rock, it is save the cost. Welcome to inquiry us about chromatography consumable.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap

The transparent glass threaded sample bottle is 2mL, 12x32mm, and has an advanced sample bottle sealing system. The screw vial can prevent the septum from being pressed in, and can provide a stop point for the bottle cap to prevent over-tightening or over-tightening, and it can provide the best and consistent seal every time.