9mm Screw Caps for 9mm HPLC Vials

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

Polypropylene screw cap with septum – Polypropylene screw cap with precision fit septum provides anti-evaporation seal. Two layers include silicone and PTFE. Silicone septum for multiple injections. PTFE lining screw cap for organic samples. The screw cap provides an inert airtight seal and holes directly into the sample with a needle.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

9mm screw autosampler vial is widely used in laboratory chromatographyanalysis. Aijiren as one of largest chromatography consumable supplier, supplies 9mm screw HPLC vial in wholesale price. This 9mm screw vial package can reduce screw vial mouth touch to prevent contamination of sample. At the same time, the package box can be used as a vial rock, it is save the cost. Welcome to inquiry us about chromatography consumable.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative 9mm closures and 9mm screw top vials for consistent productivity on every separation.
Standard opening screw-thread vials are manufactured from borosilicate glass and have a maximum fill volume of 2 ml.

The 9mm high recycling vial is a new vial specially designed by Aijiren for precious samples in the laboratory. Many times the autosampler will leave sample residue in the vial when it is injecting samples. If the sample is precious, this residue is undoubtedly a waste. High-recovery vials can avoid this problem.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

These vials are a good choice for the latest autosamplers. With an emphasis on improving sample security and integrity, we offer innovative 9mm closures and 9mm screw top vials for consistent productivity across all separations.
Standard opening screwed viars are manufactured from borosicate glass and the maximum filling volume is 2 ml.

9-425 short thread vials with screw caps wholesale, the best supplier in China
Aijiren provides chromatography vials, caps, vial inserts, syringe filters for hplc, glass reagent bottles, etc
Suitable for most autosampler use in the market

The aijiren chromatography sample vial is made of borosilicate glass and meets ASTM TYPE I ClassA and USP TYPE I standards.
There are four types: colorless and amber vial, handwriting area and no handwriting area.

screw vials are also available in different sizes, and the cap is made of PP for sealing. The glass vial has a maximum capacity of 2ml and has a screw cap. The insert can be used with any autosampler and fits standard or wide-mouth vials.

The 9mm hplc vials produced by Aijiren can be used in many places and scenarios. The GC System is just one of them. More often, the 9mm hplc vials produced by Aijiren are used in different Autosamplers. Its compatibility is a major part of its popularity. the reason. Aijiren’s 9mm hplc vials is one of the most popular products.

The non-pre-slit septas help to reduce carryover from vial to vial because the resealing characteristics of the septum act as a squeegee to wipe solution from the outside of the needle. Typically, a non-slit septum exhibits resealing capabilities for a limited number of needle punctures but for long-term storage in the vial, using a new non-punctured septum is best practice.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process

Aijiren understands that 2ml HPLC vial are as important as chromatography columns or instruments. As a result, Aijiren 2ml HPLC sample vial are designed to meet the highest standards you can expect. So 2ml HPLC vial can be exported to 32 countries.

Product name: 1.5/2ml sample vial plastic PP material

Packing: vial, boxed (100 pcs/box)/caps and septa  bag (100 pcs/pack)
Size: Vial (11.6*32mm) / Gasket (Φ9*1mm)
Material: Vial (PP) / Gasket (Teflon / Silicone) / Cap (Polypropylene)
Gasket performance: acid resistance, alkali resistance, temperature resistance, anti-sticking

Aijiren is a supplier of 2ml 9mm Screw HPLC Vials. Our factory specializes in the production of vials for chromatography. We use good raw materials to make vials and sell them at a cheap price while ensuring quality.
The 2ml 9mm Screw HPLC Vials provided by Aijiren can be added with a writing area, which is convenient for customers to mark
samples during experiments and to distinguish samples. Aijiren’s 2ml 9mm Screw HPLC Vials also accept logo customization. If
the customer needs, we can print the customer’s brand logo on the vial. We provide customized services to facilitate customer needs. If you need 2ml 9mm Screw HPLC Vials or customized service, please contact us.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Glass Screw Vials ND9mm for HPLC, Clear & Amber, with /without Patch
High Recovery Glass Screw Vials ND9mm, Clear & Amber, with /without Patch
0.3ml Glass Screw Vial integrated with Micro-insert, Base Bonded, Clear & Amber, with /without Patch
PP Screw Vials ND9mm, Clear & Amber
0.3ml PP short Screw Micro Vials, Clear & Amber

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.