9mm Screw Top Amber Glass High Recycling Vials

9mm Closures are formed by the combination of Cap and Septa. Screw Neck guarantees the tightness of 9mm Closures. Generally speaking, one end of PTFE faces the sample surface, because PTFE is highly inert and difficult to react with chemicals. Aijiren also supports separate orders for Cap and Septa.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process

Polypropylene screw cap with septum – Polypropylene screw cap with precision fit septum provides anti-evaporation seal. Two layers include silicone and PTFE. Silicone septum for multiple injections. PTFE lining screw cap for organic samples. The screw cap provides an inert airtight seal and holes directly into the sample with a needle.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections.

The staff in the picture is disassembling the assembled 9mm Screw Neck Cap with Septa. These are 9mm Screw Neck Closures randomly selected from different machines. Since Aijiren produces more machines, many samples need to be checked. Solution to check whether Septa and Cap are damaged, if they are not sturdy, Septa may fall off or fall off easily. Aijiren’s strict quality inspection guarantees the quality of the product.

Aijiren understands that 2ml HPLC vial are as important as chromatography columns or instruments. As a result, Aijiren 2ml HPLC sample vial are designed to meet the highest standards you can expect. So 2ml HPLC vial can be exported to 32 countries.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

The Autosampler Vial produced by Aijiren is often used in autosamplers. Whether it is Aijiren or other brands of autosamplers, Aijiren Autosampler Vial can be perfectly adapted. It is precisely because of this that Aijiren Autosampler Vial can be so well-known and become A well-known manufacturer of chromatography consumables in the world.

Caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate and is great for nail polish remover and higher concentration acids & alkalis. Good for non-oil products filled at room temperature. Because this lining system is paperless, your samples will not be contaminated with fiber or paper particles from the closure. Available in Phenolic caps.

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap, sample vial has Transparent, amber, transparent with scale writing, and amber with scale writing are available for selection, suitable for various models of autosamplers such as Aijiren, Waters, Varian and Shimadzu.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

Product name: 1.5/2ml sample vial plastic PP material

Packing: vial, boxed (100 pcs/box)/caps and septa  bag (100 pcs/pack)
Size: Vial (11.6*32mm) / Gasket (Φ9*1mm)
Material: Vial (PP) / Gasket (Teflon / Silicone) / Cap (Polypropylene)
Gasket performance: acid resistance, alkali resistance, temperature resistance, anti-sticking

Aijiren strongly recommends to use only ready-made sealing caps, whose lining matches the bottle cap completely, and has been automatically inserted under strict sanitary conditions.

Polypropylene caps are known for good impact strength, cost effectiveness, and pliability. They can be remelted after they are formed. Aijiren Polypropylene cap is widely used in chromatography analysis.

The transparent glass threaded sample bottle is 2mL, 12x32mm, and has an advanced sample bottle sealing system. The screw vial can prevent the septum from being pressed in, and can provide a stop point for the bottle cap to prevent over-tightening or over-tightening, and it can provide the best and consistent seal every time.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

The steep conical High recovery interior bottom provides exceptional downward drainage while allowing maximum retrieval of contents by syringe. High recovery Vials are perfect for specialty pharma, biotech, pharmaceutical and diagnostics packaging applications.

Vial Closure Size: 9mm
Vial Volume (Metric) 1.5mL
Volume (Metric) Working 1.3mL
Material: Glass
Color: Amber
Height (Metric) 32mm
Outside Diameter (Metric) 12mm
Residual Volume: <4μL

blue screw cap for 9mm screw vials
with pre-slit septa white silicone blue PTFE
size: 9mm*1mm
package: 100pcs/pack

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.

9-425 short thread vials with screw caps wholesale, the best supplier in China
Aijiren provides chromatography vials, caps, vial inserts, syringe filters for hplc, glass reagent bottles, etc
Suitable for most autosampler use in the market

Aijiren focus on improving the safety and integrity of our samples. Aijiren provide innovative 9mm thread caps and 9mm 2ml Hplc Screw Vials to ensure consistent productivity in all separation processes. These vials are the best choice for the latest autosampler. Standard open screw vials are made of borosilicate glass with a maximum filling volume of 2ml.

Aijiren’s 9mm Screw Neck Autosampler Vial is one of Aijiren’s most popular products. The screw neck and 2ml capacity are very compatible with the specifications of the autosampler, especially Aijiren’s 100pcs/pack, which is very convenient for customers to use. It is well received, has strong stability and is not easily affected by other reagents.

Aijiren’s 2ml Glass Vials can be applied in a wide range of fields. Many projects that require chromatographic analysis need to use 2ml Glass Vials, such as environmental analysis, soil analysis, pharmaceutical analysis, food analysis, etc. The aim of Aijiren is to provide high-quality chromatographic consumables for customers of chromatography.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.