Hot sale used for lab supplier 0.22 um 25 mm HPLC Syringe Filter

Aijiren manufactures a Syringe Filter that comes in a number of different membranes, PTFE membranes are hydrophilic and inert and fit many different types of agents, the details below contain the chemicals compatible with the PTFE Syringe Filter. In addition, the article number and specific specifications of Aijiren PTFE have been clearly described. If you have any needs, please leave a comment below for inquiry.

We provide the protection of PTFE and the resealing ability of silicone with our septa and seals to fit our autosampler crimp top vials. This seal includes a two sided PTFE septa with silicone in the center. Caps are made of high quality polypropylene, Caps have the profile of a crimp or snap closure for compatibility with robotic autosamplers, Pre-assembled septa reduces the chance of contamination during sample preparation, while saving sample preparation time in the lab.

Autosampler Vials, Caps and Closures Aijiren 20 mm Headspace Glass Vials Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish.

If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.

The 18mm screw thread 10ml gc vial produced by Aijiren has a specification of 22.5*46mm, and the glass is borosilicate glass, all of which are 5.0 type. The round bottom design prevents reagents from remaining on the bottom of the 18mm screw thread 10ml gc vial. Amber glass can protect samples sensitive to light.

Laboratory glass headspace vials are specialized vials used in chromatographic techniques such as High-Performance Liquid Chromatography (HPLC) and Gas Chromatography (GC) for the analysis of volatile compounds.Headspace analysis involves the extraction and analysis of volatile compounds present in the headspace (the gas phase) above a sample.

The PTFE layer of Aijiren’s 20mm PTFE Septa composite diaphragm is in contact with the reagent. It is chemically inert, resistant to acids, alkalis, temperature and adhesion. Even at high temperatures, it cannot work with concentrated acids, alkalis or strong oxidants. At the same time, the elasticity of the silicone rubber or silicone layer can ensure the sealing performance; Aijiren abides by strict production management to ensure the quality of the product. The product is clean and can be used directly without washing.

The 4ml hplc vials produced by Aijiren are known for their high quality and strong stability. The opening of the 4ml hplc vial is 13mm. The screw Neck thread is very convenient for Cap sealing. Caps can choose to have a center hole or no center hole, and a center hole is available. Convenient for sampling with automatic injection needle, 13-425 without center hole is suitable for sealing samples.

COD testing is a good better indicator of organic pollutants in industrial wastewater containing cyanides and heavy metals. COD testing affords rapid response to changing conditions before critical problems develop. 

4 ml HPLC borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis. Borosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.

Aijiren produces 2ml autosampler vial, headspace vial, sample storage vial, etc., in two colors, clear and amber. Amber has a light-shielding function, which can isolate ultraviolet rays and protect samples. Aijiren is made of high-quality borosilicate hydrochloric acid glass, the cap is made of polypropylene, and the septa is made of silicone and ptfe to ensure the sealing and quality of the vial.

24 mm vial typically refers to a type of vial or container that has a 24 millimeter (mm) diameter. Vials are small, cylindrical containers used for various purposes, such as storing and transporting liquids or samples.
24 mm EPA vial typically refers to a specific type of vial designed for environmental analysis and sample collection.
It’s important to note that the specific characteristics of a 24mm vial, such as its shape, capacity, and compatibility, can vary depending on the intended use and manufacturer.

Screw Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. The material of Headspace Vials is low extractable Borosilicate glass with low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance and high chemical stability. Headspace Vials suitable for headspace analysis of volatile solids and gases.

Syringe filter is a disposable filter unit designed to remove impurities from liquids or gases using a syringe as the fluid delivery system.
It consists of a plastic housing with an inlet and an outlet, and a filter membrane positioned between them.
The filter membrane is often made of materials such as polypropylene, polytetrafluoroethylene (PTFE), or nylon.
To use a syringe filter, the liquid or gas to be filtered is drawn into a syringe, and then the syringe is attached to the inlet of the syringe filter.

The 0.3ml micro amber pp vials produced by Aijiren has a V-shaped liquid storage groove, which can increase the liquid level and facilitate the extraction of the automatic injection needle. It is very suitable for rare or precious samples, and the PP material is extremely inert. It will affect the chemistry of the sample, and the color of Amber can avoid ultraviolet radiation to meet the needs of sample injection.

The 2ml hplc vials provided by Aijiren are well-known around the world and are loved by consumers from all over the world. The picture shows the Singaporean customer and the staff of Aijiren to learn about the 2ml hplc vials. Aijiren’s 2ml hplc vials production plant adopts fully automated production, and 2ml hplc Vials’ machinery and equipment are also semi-automatic, ensuring consistent specifications between batches and high quality and reasonable prices.

Aijiren¡¯s PP syringe filter uses a hydrophobic polypropylene membrane, which has stable physical and chemical properties, good compatibility, low protein adsorption, and is suitable for filtration of aqueous solutions and most solvents. Commonly used to filter biological samples, solvents, deionized water and reduce biological load, the hydrophobic PP filter membrane is particularly good for gas filtration. The product was sterilized by dry heat at 121¡ãC for 15 minutes.

Brand: Aijiren
Mouthful capacity: 2.0ml
Material: made of grade 1 hydrolyzed glass
Color: brown
Whether OEM processing: Yes
Packing: 100 pcs/box, packed in PP plastic pallet box

Aijiren’s Sample Storage Vial is mostly used for environmental analysis,Sample Storage Vial is often used to store samples for experimental analysis. Aijiren uses high-quality borosilicate hydrochloric acid glass to make Sample Storage Vial to ensure that samples can be stored well without affecting the quality of the samples.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

GL45 reagent bottles often feature graduation markings on the side. These markings indicate volume measurements at regular intervals, allowing for accurate and precise dispensing or dilution of reagents. The graduation markings are typically in milliliters (ml) or liters (L), depending on the size of the bottle.

Order as individual sample storage vials and closures or as unassembled convenience kits.
Unassembled convenience kits saves time during sample preparation.

Solid-top convenience kits include matched quantities of vials and screw caps with pre-assembled septa.
Open-top convenience kits contain shrink-wrapped vials and separately packaged caps and septa in polybags.