GL80 blue cap Borosili 3.3/Soda-lime glass reagent bottle with PP GL80 Screw Cap for Laboratory storage

Buy Aijiren Sample Storage Vial online at wholesale rates. If you have been looking for Sample Storage Vial, your search ends here as you can get the best Sample Storage Vial in China. You can purchase Sample Storage Vial of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Sample Storage Vial prices, you can be totally sure to get the best rates as Aijiren brings you genuine Sample Storage Vial rates and quality assured products. Procure Sample Storage Vial today and avail the best offers on your purchase.

The reagent bottle produced by Aijiren has a low thermal expansion coefficient (3.3), which provides far better heat resistance than standard laboratory glass (or soda lime glass). Aijiren glass can withstand temperatures from -70 to 500°C, so it can be reused in freezers, microwave ovens, autoclaves and dry heat sterilizers.

The Head Crimper is suitable for use with standard laboratory vials and aluminum cap seals. The 20mm Manual Flip-Top Crimper is designed for crimping flip-top caps.

The headspace sample bottles produced by Aijiren can be made of clear or amber glass, with round or flat bases, crimp seals with beveled or square edges, or surface treatments with threads. The headspace bottle, septum and cap can be purchased separately or together as a convenience kit to meet the needs of your laboratory.

1.5ml autosampler GC vial is a type of vial specifically designed for automatic sample injection in gas chromatography (GC) systems. These vials are typically made of glass or plastic and are used to contain liquid or solid samples that will be analyzed using a gas chromatograph.
Autosampler vials are designed to be compatible with automatic sample handling systems, allowing for efficient and precise sample introduction into the GC instrument.

TOC caps and vials are ideal for sampling and storage. The cap is lined with PTFE/silicone resin, which has excellent airtightness and chemical resistance. High temperature resistance -60 degrees Celsius -200 degrees Celsius. The TOC Vial cap is made of high-quality materials, which can eliminate sample contamination

11mm crimp vial is a FDA “white listed” materials,USP VI-certified compound. It can be resealed after multiple punctures. There is no flash or parting line. Various composite hardness testers are provided. Easy to puncture. Customized design to suit each application design. High capacity supply capacity , A wide range of sizes.

Storage glassware made of type 1, Class A, 33 extended borosicate glass or 51A orange glass
Capacity range is from 2mL to 40mL
Provides a constant pH during the sample retention period
Chemically inert caps suitable for most chromatography and storage applications
Highest quality PTFE/silicone septum used for cleanliness

Polyethylene SepCap with starburst center design eases syringe needle penetration
Convenient vial kits include equal quantities of vials and caps

EPA screw vials are a specific type of vial designed to meet the requirements set by the U.S.
Environmental Protection Agency (EPA) for environmental sample analysis.
These vials are commonly used for the collection, storage, and analysis of water, soil, and other environmental samples.
It’s important to note that the specific requirements for EPA screw vials may vary depending on the intended analysis method and regulatory guidelines

9 mm screw top vial, 32×11.6 mm, clear glass, high recovery, borosilicate glass
1.5ml vial with 30ul reservoir for sample concentration and injection, no transfer to micro insert

2ml snap autosampler vial is mainly used in lab chromatography analysis. This 2ml snap top autosampler vial has some features: 1.Extremely high inertness: The inertness of the sample vial can reduce the peak variability of the analyte. 2. Consistent performance: Each batch of the sample vial has consistent performance, which saves you more time for troubleshooting and re-running samples. You can also cooperate with Micro-insert when the sample margin is small.

With their superior chemical resistance, these bottles are ideal for storing reagents, culture media, biological fluids and a variety of other aqueous and non-aqueous solutions.

Clear bottles are ideal for display purposes and range in size from 100ml to 1000ml, the larger sizes can be used to store preserved biological specimens in the laboratory. The larger sizes also make excellent terrariums or miniature aquariums.

The butyl septa on the PTFE surface can be used in the headspace sample bottle to evaluate the injection activity and the penetration efficiency of methyl bromide on the activated carbon. The septum can be used to seal the vial during liquid sample collection for unmodified benzene analysis using HPLC method

• Dimensions: 12 x 32mm
• Total Volume: 0.4ml
• Usable Volume: 0.25ml
• Min working volume: 30µL
• Residual volume: <4µL • Neck Diameter: 9mm • Thread Type: 9-425 • Features: Fused Insert

Storage Vial is supplied by Aijiren. These vials are pre-sterilized and have a capacity of 60ml. These vials can be used for storing biological material, human and animal cells. The cap is provided with a built-in seal ring which makes the vial leakproof. The base of the vial has longitudinal grooves which gives it a non-twisting character when placed in a vial rack.

11mm Crimp Neck Vials is made of high-quality 33 expanded borosilicate 51A brown (type 1 type B) glass. Some sample bottles provide graduated writing labels for easy identification of samples. Wide neck design is easy to fill. If there is a need for small sample detection, it can be matched with micro -insert.

8mm screw Caps are made of high quality polypropylene, Caps have the profile of a crimp or snap closure for compatibility with robotic autosamplers, Pre-assembled septa reduces the chance of contamination during sample preparation, while saving sample preparation time in the lab.