PP Caps with Center Hole in 8mm

Aijiren has been producing 8-425 2ml hplc glass vial for more than ten years. During this decade, Aijiren added new factories and production lines to strictly regulate production standards and processes. Continuous improvement has made Aijiren one of the largest laboratory consumable suppliers in southern China.

Chromatographic autosampler vials are glass vials used for chromatographic autosampling in liquid chromatographs, gas chromatographs, mass spectrometers and other autosamplers and headspace samplers. Generally consists of a complete set of vial, cap and gasket. Its basic requirements are accurate volume, can withstand a certain pressure, good sealing performance, no adsorption effect on the sample.

Transparent viale, 33-extended borosicate glass USP type I, Class A
Step-by-step write marking spot area, 0.5, 1.0, and 1.5ml
Strict quality control to ensure a consistent size of each lot of items.
Flat bottom to ensure consistent matching between the vial and the true neck 6mm of the standard glass insert.
Caps are made of high-quality polypropylene to meet accurate manufacturing tolerances
Septum is made of the highest quality materials to ensure proper functioning

Aijiren’s 8-425 2ml Autosampler Vials is very popular. It is favored by our customers for its high quality and cheap price. Aijiren is a manufacturer of 8-425 2ml Vials, so we bring our customers to the factory price.Buy 8-425 vials,Choose Aijiren.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

Welcome to buy Aijiren 8-425 2ml hplc vial with cap. Aijiren has a large output and can quickly complete the mass production of 2ml hplc vial with cap after you place an order. Aijiren has long-term cooperation with freight forwarders to ensure that you get the goods as soon as possible. To purchase 2ml hplc vial with cap, please choose Aijiren.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage.

1.5ml/2ml 8-425 autosampler vial (Shimadzu chromatography sample vial) is provided by Zhejiang Aijiren Rechnology Co., Ltd., instead of imported Shimadzu sample bottle, standard GC, HPLC sample bottle, 5MM caliber, 8-425 standard Threaded port can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum. The bottle cap is made of high-quality polypropylene, and the septum is manufactured with high-quality materials to ensure the efficiency of the function.
Applicable to: Beckman, Diane, Finnigen, Gilson, LKB, Thermoelectric Thermo, Varian Varian, Shimadzu and other autosamplers.

2ml Autosampler Vials 8-425 Neck surface finish is representative of hplc vials &GC vials, vials have a screwed outer diameter of 8 mm, thread style 425, vials are available in clear and amber, threaded caps in Lab most 2ml vials are 11.6x32mm

2ml Autosampler Vials 8-425 neck finish represents a hplc vials &gc vials, the vials a diameter of 8mm over the outside of the threads and a thread style of 425, vials has clear and amber, screw cap in lab most of the 2ml vials are 12x32mm.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Aijiren’s HPLC Vial is divided into two types: clear glass and amber glass. The clarity of clear glass is more obvious. The reagent changes in the vial can be clearly seen. The amber glass can protect the sample in the vial from deterioration due to ultraviolet radiation.

8-425 thread caps and viars are often used in combination with Shimadzu, Specra-Physics, Varian, and other autosamplers
The vial is made of transparent type 1 class A or amber, type 1 class B borosicate glass and contains writing patches for sample identification.

Let me introduce the material of 8-425 2ml autosampler vials, 33 Expansion borosilicate glass USP Type I Class A made of clear vial, or 51 Expansion borosilicate glass USP Type I, Class B made of Amber vial.Our glass uses neutral borosilicate and low borosilicate, but our neutral borosilicate can reach the standard of high borosilicate, and our low borosilicate can reach the standard of neutral borosilicate. We use excellent raw materials to make 8-425 2ml autosampler vials.

If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.

The 8-425 Screw Cap with Septa for 8mm Vial offers compatibility with a wide range of laboratory applications. They are commonly used in chromatography techniques, such as High-Performance Liquid Chromatography (HPLC). These screw caps are suitable for both routine analysis and research applications, ensuring reliable and reproducible results.

The 1.5ml and 4ml HPLC Autosampler Vials are essential tools for sample storage and injection in High-Performance Liquid Chromatography (HPLC) systems. These vials are made of high-quality materials, such as borosilicate glass, ensuring excellent chemical resistance and sample integrity.

Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications. 2ml Autosampler Vials 8-425 Neck surface finish is representative of hplc vials &GC vials

Thread: Accepts 8-425 ND8
Opening: 5.5mm center hole or closed top
Key Models:

SC81181: Pre-slit white PTFE/red silicone

SC8182: Closed top cap for volatile storage

SC8183: White cap for easy visual monitoring

Standard 8-425 screw neck autosampler vials (11.6x32mm) engineered from USP Type I borosilicate glass. Designed for precise sample containment in HPLC and GC analytical workflows, compatible with major brand autosamplers.

The Screw Cap and Septa for 1.5ml HPLC Autosampler Vial are essential components for secure sealing and sample integrity in HPLC analysis. The screw cap ensures a tight and leak-proof closure, preventing any contamination or loss of samples. The septa, made of high-quality materials, provides excellent chemical resistance and ensures a reliable seal.

Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum.
8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers. The vial is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass , And attached with a writable label for sample identification.