Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance.

A  headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

All 20mm Headspace Crimp Vials may appear to be created equal, but quality and performance make the difference when analyzing vital samples. Aijiren 20mm Headspace Crimp Vials are cleaned and packaged in a certified Class 10,000 clean room according to a designed process, developed to eliminate chromatographic errors associated with vials.

The Crimpe Top headspace vials produced by Aijiren are usually made of Aluminum. A special model is SBC201202, which uses double-sided Septa made of PTFE/Silicone and Crimp Top blue Magnetic Aluminum Cap with 8mm center hole.

A solid disk of PTFE offers superior chemical inertness against the most aggressive solvents. The thin membrane allows for easy penetration by most needles. PTFE septa are not resealable. They should be used with relatively short cycle times or single injection methods.

Headspace vials are available in clear or amber glass, with round or flat bases, with beveled or square crimp seals, or with screw threads. Headspace vials, septum and caps can be purchased separately in various quantities or together as convenience kits to suit your laboratory needs.

Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. With very low metal content, extractables and leachables, they meet high standards to meet your regulatory requirements. These headspace vials have been specification certified for physical dimensions and autosampler compatibility.

The round-bottomed headspace vial distributes the internal pressure generated at high temperatures on the entire glass surface, and the beveled edge has a firm edge that can be pressed into the septum to achieve a more effective seal. The flat-bottomed sample bottle has a long neck and is suitable for use with headspace automatic sampling instruments

Headspace Vials and Closures from Aijiren. Aijiren Technologies headspace vials and closures are engineered to prevent sample contamination and ensure accurate analysis. They are available in a range of sizes and glass types. Choice of crimp or screw top vials; Bevelled top for maximum level of seal security.

The material of the headspace sample vials is low-extraction borosilicate glass, which is characterized by low expansion, high temperature resistance, high strength, high hardness, high light transmission and high chemical stability. Headspace vials are suitable for headspace analysis of volatile solids and gases. 20mm crimp headspace vial is widely used in Headspace and GC, GCMS application.

Headspace vial manufactured from Borosilicate glass by Aijiren. Headspace vial can be available in 6ml – 20ml. Clear or Amber can be choose. Crimp Thread Headspace Vials use a 1.25 mm average wall thickness, which offers more reliability when internal pressures build. Our Headspace Vials meet or exceed OEM standards.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process;

Torticollis headspace sample vial, 10mL or 20mL volume, flat-bottomed or round-bottomed 20mm crimp top vial cap to ensure consistent safety sealing.

ND20 Crimp-top headspace refers to a specific type of headspace vial closure system used in gas chromatography (GC) for the analysis of volatile compounds.
ND20 headspace analysis can be performed using different techniques, such as static headspace, dynamic headspace, and purge and trap.
Each technique has its own advantages and is suitable for specific sample types and analyte properties.

Suitable for 11mm 2ml Crimp Neck Vials & 20mm Headspace GC Vials
Caps Material: Aluminum
Use Together with PTFE/Silicone Septa or Rubber Stopper
Color: Metal Silver
Vial Septa & Rubber Stopper and Crimpers are also Provided

Headspace vials are laboratory vials for headspace analysis that are temperature and corrosion resistant. With very low metal content, extractables and leachables, they meet high standards to meet your regulatory requirements. These headspace vials have been specification certified for physical dimensions and autosampler compatibilit

Aijiren Headspace Vials feature rounded shoulders and bottoms, allowing for even heating and safer operation at higher pressures. The newly designed top provides a tighter seal with your septa. Vials are manufactured from Type I borosilicate glass and accept 20 mm aluminum seals.

The headspace sample vials produced by Aijiren can be made of clear or amber glass, with round or flat bases, crimp seals with beveled or square edges, or surface treatments with threads. The headspace bottle, septum and cap can be purchased separately or together as a convenience kit to meet the needs of your laboratory.

Headspace vials are a type of sample container used in analytical chemistry, specifically for headspace analysis. Headspace analysis involves the analysis of volatile compounds present in the gas phase above a sample. These volatile compounds are typically of interest in applications such as gas chromatography (GC) or gas chromatography-mass spectrometry (GC-MS).
Headspace vials are designed to hold the sample and create a sealed environment for the vapor phase above the sample. The vials are typically made of glass, although plastic vials are also available. The vials have a specific volume capacity, which can range from a few milliliters to several tens of milliliters, depending on the application.

Headspace vials have different capacity specifications, including 6ml, 10ml, 20ml, etc. Use a standard sample vial to ensure sufficient headspace. Usually, the reserved volume should be at least 50% of the sample volume.

Aijiren Tech’s headspace vials are manufactured to provide uniform glass thickness, thereby ensuring uniform heat distribution, thereby achieving consistent sampling reliability. All Aijiren Tech headspace vials meet the manufacturer’s specifications. AijirenTech sample bottles are available in 6ml, 10ml, and 20ml types, with screw and crimping types.

Use: Liquid Medicine
Capacity: 20ml
Sample: Provided Freely
Logo: Acceptable Customer’s Logo
Payment terms: T/T Wes

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

20mm crimp-top headspace borosilicate glass vial is a specific type of vial used in headspace analysis, a technique commonly employed in gas chromatography (GC). These vials are designed to store and analyze samples for volatile compounds.
Headspace analysis involves the sampling and analysis of the vapor phase above a sample, typically done to analyze volatile compounds that can be released from solid or liquid samples.
The headspace vials are specifically designed to withstand the increased pressure and temperature conditions associated with this technique.It’s important to note that Headspace vials may also be available with other closure mechanisms, such as screw caps or magnetic caps.

Aijiren Tech headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability. All Aijiren Tech headspace vials meet or exceed OEM instrument manufacturer’s specifications.Aijiren Tech vials are available in 20ml versions with Screw and Crimp type.

The butyl septa on the PTFE surface can be used in the headspace sample bottle to evaluate the injection activity and the penetration efficiency of methyl bromide on the activated carbon. The septum can be used to seal the vial during liquid sample collection for unmodified benzene analysis using HPLC method