Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. With very low metal content, extractables and leachables, they meet high standards to meet your regulatory requirements. These headspace vials have been specification certified for physical dimensions and autosampler compatibility.

Headspace vials are available in clear or amber glass, with round or flat bases, with beveled or square crimp seals, or with screw threads. Headspace vials, septum and caps can be purchased separately in various quantities or together as convenience kits to suit your laboratory needs.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

Aijiren Tech Headspace Vials are available as screw or crimp neck vials with flat or round bottoms, with clear or amber glass. Headspace closures are available in pre-assembled caps with septums or can be ordered individually. Pressure release, seal with lining, and seal with magnetic lining is also optional.

The round-bottomed headspace vial distributes the internal pressure generated at high temperatures on the entire glass surface, and the beveled edge has a firm edge that can be pressed into the septum to achieve a more effective seal. The flat-bottomed sample bottle has a long neck and is suitable for use with headspace automatic sampling instruments

Aijiren, as a supplier of chromatography consumables, provides headspace vials and sealing plugs. Aijiren s headspace vials and caps are carefully designed to prevent sample contamination and ensure accurate analysis. They come in various sizes and glass types. Optional crimping or threaded vials.

The 20mm Crimp Cap is often used with Headspace Vial. It is tightly sealed and suitable for long-term storage of samples. The cap with center hole can be cut by septa, which is convenient for automatic sampling needle sampling.

Suitable for 11mm 2ml Crimp Neck Vials & 20mm Headspace GC Vials
Caps Material: Aluminum
Use Together with PTFE/Silicone Septa or Rubber Stopper
Color: Metal Silver
Vial Septa & Rubber Stopper and Crimpers are also Provided

PTFE-fused septa are suitable to overcome the degradation, which happens due to prolonged high temperatures, commonly observed in silicone rubber septa. The degradation results in baseline drift and additional peaks. It is generally fixed with the PTFE face towards the column packing.

Aijiren’s Headspace Caps often use metal material aluminum, which is soft and convenient for Hand Crimper and Decrimper for sealing. Not only that, the Septa produced by Aijiren is also made of high-quality silicone and ptfe, and is pressed with an exclusive process. This kind of septa is not easy to deform, break, and fall off, and it can also ensure the tightness of the vial.

A headspace vial is used in the process of top – gas chromatography. The material of Headspace Vials is low extractable Borosilicate glass with low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance and high chemical stability. Headspace Vials suitable for headspace analysis of volatile solids and gases.

Crimp Caps squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The crimp cap vial requires crimping tools to carry out the sealing process.

The 20mm Crimp Top Caps produced by Aijiren have a diameter of 20mm and a center hole with a diameter of 9.5mm. The color is the silver color of aluminum itself, which is very modern and beautiful. The matched septa are all 20*3mm, and the double-sided synthetic septa ensures the sealing.

A solid disk of PTFE offers superior chemical inertness against the most aggressive solvents. The thin membrane allows for easy penetration by most needles. PTFE septa are not resealable. They should be used with relatively short cycle times or single injection methods.

20ml,22.5ⅹ75mm, DM18
Material: USP1, Borosilicate Glass
Box packaged tpo minimize sample bottle damage.
Manufactured under strict quality, which ensures dimensional consistency from lot-to-lot
Suitable for headspace analysis of volatile solids and gases.
Store volatile samples to prevent sample evaporation
High temperature resistance and corrosion resistance
Mainly used in gas chromatography analysis for headspace analysis.

Headspace vial manufactured from Borosilicate glass by Aijiren. Headspace vial can be available in 6ml – 20ml. Clear or Amber can be choose. Crimp Thread Headspace Vials use a 1.25 mm average wall thickness, which offers more reliability when internal pressures build. Our Headspace Vials meet or exceed OEM standards.

Grey PTFE/Moulded Butyl Septa & Grey PTFE/Pharma-fix Butyl Septa for 20mm crimp vials, Size: 20*3mm, 100pcs/pk

Aijiren provides one of the widest selections of Caps, Closures, and Lids available. Select from a wide variety of metal and phenolic, and polypropylene plastic bottle caps, vial lids, and other closures with an array of lining systems to fit your application and container. We also feature dispensing caps, hole caps, septa, tube caps and vial caps.

A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

Torticollis headspace sample vial, 10mL or 20mL volume, flat-bottomed or round-bottomed 20mm crimp top vial cap to ensure consistent safety sealing.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

The Crimp Top headspace vials are made of borosilicate hydrochloric acid. It has a transparent and amber color and can withstand a temperature range of -60 to 200 degrees Celsius. Generally speaking, the volume of the headspace vial is 10-20ml, and the characteristic is 22.5*46/75mm. The performance is acid resistance, alkali resistance and high temperature resistance. Packaging usually adopts inner packaging shrink plastic box.

The butyl septa on the PTFE surface can be used in the headspace sample bottle to evaluate the injection activity and the penetration efficiency of methyl bromide on the activated carbon. The septum can be used to seal the vial during liquid sample collection for unmodified benzene analysis using HPLC method

Aijiren Tech crimp top headspace vials are available in a flat or round bottom style, with clear or amber glass. Headspace closures are available in pre-assembled caps with septums or can be ordered individually. Pressure release, seal with lining, and seal with magnetic lining are also optional.

Headspace vials are laboratory vials for headspace analysis that are temperature and corrosion resistant. With very low metal content, extractables and leachables, they meet high standards to meet your regulatory requirements. These headspace vials have been specification certified for physical dimensions and autosampler compatibilit