20mm Crimp Top Headspace Vials for GC

Headspace vials can withstand the higher temperatures and internal pressures required for volatile gas analysis. With very low metal content, extractables and leachables, they meet high standards to meet your regulatory requirements. These headspace vials are specification-certified for physical dimensions and autosampler compatibility.

10 ml 20 ml headspace vial is a specialized type of vial used in gas chromatography (GC) analysis for the analysis of volatile compounds.
It is designed to hold a sample in the headspace, which is the gas phase above the liquid or solid sample.
Head space vials analysis of gases present in head space sample vials,Laboratory bottles for head space analysis are called head space vials.
To get accurate results,We also have certain requirements for sample bottles and septa.

Headspace vials are a type of sample container used in analytical chemistry, specifically for headspace analysis. Headspace analysis involves the analysis of volatile compounds present in the gas phase above a sample. These volatile compounds are typically of interest in applications such as gas chromatography (GC) or gas chromatography-mass spectrometry (GC-MS).
Headspace vials are designed to hold the sample and create a sealed environment for the vapor phase above the sample. The vials are typically made of glass, although plastic vials are also available. The vials have a specific volume capacity, which can range from a few milliliters to several tens of milliliters, depending on the application.

The Crimpe Top headspace vials produced by Aijiren are usually made of Aluminum. A special model is SBC201202, which uses double-sided Septa made of PTFE/Silicone and Crimp Top blue Magnetic Aluminum Cap with 8mm center hole.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

Metal caps offer the widest range of temperature tolerances and are very resistant to fracture from impact. Metal caps are great for gas chromatography applications. A metal closure is manufactured from either steel (coated with anti-corrosive coating of either chromeplate or tinplate) or aluminum.

10ml 20ml Headspace GC vials are a type of sample vial used in gas chromatography (GC) analysis.
They are specifically designed for the analysis of volatile and semi-volatile compounds present in a sample.
Headspace analysis involves the extraction of volatile compounds from a solid or liquid sample into the gas phase for injection into a GC instrument.
20mm aluminum caps and septa are commonly used in chromatography applications, including gas chromatography (GC) and high-performance liquid chromatography (HPLC). They are used to seal sample vials and ensure a gas-tight or liquid-tight seal.

Headspace vials are common consumables generally used in gas phase experiments. Headspace samples are typically prepared in vials containing sample, diluting solvent, matrix modifier, and headspace.

Headspace Crimpe Vials are available in volumes from 6 mL to 20 mL. We offer Headspace Crimpe Vials with a flat top or a beveled top, and are available with either a flat bottom or a rounded bottom Headspace Crimpe Vials for your application.

Aijiren Tech’s headspace vials are manufactured to provide uniform glass thickness, thereby ensuring uniform heat distribution, thereby achieving consistent sampling reliability. All Aijiren Tech headspace vials meet the manufacturer’s specifications. AijirenTech sample bottles are available in 6ml, 10ml, and 20ml types, with screw and crimping types.

Use: Liquid Medicine
Capacity: 20ml
Sample: Provided Freely
Logo: Acceptable Customer’s Logo
Payment terms: T/T Wes

Crimp Caps squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The crimp cap vial requires crimping tools to carry out the sealing process.

A solid disk of PTFE offers superior chemical inertness against the most aggressive solvents. The thin membrane allows for easy penetration by most needles. PTFE septa are not resealable. They should be used with relatively short cycle times or single injection methods.

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

Headspace vial manufactured from Borosilicate glass by Aijiren. Headspace vial can be available in 6ml – 20ml. Clear or Amber can be choose. Crimp Thread Headspace Vials use a 1.25 mm average wall thickness, which offers more reliability when internal pressures build. Our Headspace Vials meet or exceed OEM standards.

Why Choose Aijiren’s 20mm Crimp Top Headspace Vials
Quality – You can expect our Headspace Vials product to be of the highest quality because they must pass the most stringent Quality Assurance tests before they arrive at your door.
Reliability – You can rest assured that the Headspace Vials you purchase will reliably perform the jobs for which they are designed.

Aluminum Caps for 20mm Crimp-top Vial
9.5mm Centre Hole
Septa: PTFE/ Silicone
Septa Size: 20*3mm

Aijiren Tech headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability. All Aijiren Tech headspace vials meet or exceed OEM instrument manufacturer’s specifications.Aijiren Tech vials are available in 20ml versions with Screw and Crimp type.

20ml,22.5ⅹ75mm, DM18
Material: USP1, Borosilicate Glass
Box packaged tpo minimize sample bottle damage.
Manufactured under strict quality, which ensures dimensional consistency from lot-to-lot
Suitable for headspace analysis of volatile solids and gases.
Store volatile samples to prevent sample evaporation
High temperature resistance and corrosion resistance
Mainly used in gas chromatography analysis for headspace analysis.

A headspace vial is used in the process of top – gas chromatography. The material of Headspace Vials is low extractable Borosilicate glass with low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance and high chemical stability. Headspace Vials suitable for headspace analysis of volatile solids and gases.

The 20mm Crimp Cap is often used with Headspace Vial. It is tightly sealed and suitable for long-term storage of samples. The cap with center hole can be cut by septa, which is convenient for automatic sampling needle sampling.

The 20mm Caps with Septa are specifically designed for secure sealing and precise analysis of headspace samples in laboratory settings. These caps have a 20mm diameter, ensuring a tight and reliable fit on crimp headspace vials. The septa, made of high-quality materials, provide excellent sample integrity by preventing contamination and evaporation during storage and analysis.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. The material of Headspace Vials is low extractable Borosilicate glass with low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance and high chemical stability.

The butyl septa on the PTFE surface can be used in the headspace sample bottle to evaluate the injection activity and the penetration efficiency of methyl bromide on the activated carbon. The septum can be used to seal the vial during liquid sample collection for unmodified benzene analysis using HPLC method

Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.