Hot product 20mL laboratory glass headspace HPLC GC vial

8-425 screw caps and vials are usually used in combination with Shimadzu, Spectra-Physics, Varian and other autosamplers. The vials are made of transparent type A type 1 type A or amber type B type B clear glass, and contain Adhesive label for sample identification.

In addition, the material of Butyl determines that Septa is not easy to deform, even if it is used for a long time, it is stretched. Aijiren uses high-quality raw materials, which ensures that Butyl Septa will not break and contaminate the sample when it is penetrated by the automatic injection needle in time.

Our Screw Sample Storage Vial adheres to industry-standard specifications, ensuring compatibility with a wide range of laboratory equipment. The 15-425 thread size is commonly used, making it compatible with various autosamplers and sample handling systems. Enjoy the convenience of standardized compatibility, allowing for seamless integration into your existing laboratory setup.

Filter sterilization, that is, removing microorganisms by physical means such as screening or filter material adsorption, is a commonly used method of sterilization. The filtration method is widely used, and some materials that need to be sterilized cannot be heated, such as many vitamin solutions. In addition to being used in the production of beverages and drugs, the air is often sterilized by filtration. When we usually do microbiology experiments, the sterilized container is usually plugged with cotton at the outlet, which is actually filtering to remove microorganisms in the air, so that there is no microbial contamination in the air entering the container.

Polypropylene plastic material provides sensible alternative when glass is not viable
Conical insert supports samples of the highest purity and sensitivity
Clear color provides for an unhindered view of the solution to observe any changes
Highest quality ISO9001:2015 certification in the industry ensures most accurate analysis of samples

The advantages of nylon: 1. Toughness 2. Wear resistance 3. Smoothness 4. Light weight 5. Insect resistance 6. Anti-mold and the material is not easy to generate static electricity, deformation, pilling and ageing.

screw vials are also available in different sizes, and the cap is made of PP for sealing. The glass vial has a maximum capacity of 2ml and has a screw cap. The insert can be used with any autosampler and fits standard or wide-mouth vials.

Aijiren 18mm magnetic screw cap (silver) and silicone/PTFE septa. Cap: The magnetic 18 mm screw cap can be effectively tested on the gas chromatograph autosampler, and the standard aperture of the center hole ensures the effective injection of the autosampler. Septa uses inert PTFE and Silicone bonding, or PTFE and Butyl bonding, these can be provided to customers to choose.

Aijiren’s 9mm Screw Cap with Septa is automatically produced by machines. The same batch specifications meet the needs of customers for experiments. And mass production can also meet the orders of customers around the world, and mass orders can also be satisfied. Because of this, Aijiren’s fast shipping speed and good product quality have enabled Aijiren to become a world-renowned supplier of chromatography consumables.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One-piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one-time use and reduce sample preparation time as there is no cap and seal to assemble.

The syringe filter produced by Aijiren is the preferred method for filtering small samples before being loaded into HPLC and GC, and is usually used with disposable syringes to filter out impurities in the sample to ensure that there is no quality in the test Problems and affect the experimental results.

Chemical oxygen demand is a vital test for assessing the quality of effluents and waste waters prior to discharge. The Chemical Oxygen Demand (COD) test predicts the oxygen requirement of the effluent and is used for monitoring and control of discharges, and for assessing treatment plant performance. The impact of an effluent or waste water discharge on the receiving water is predicted by its oxygen demand. This is because the removal of oxygen from the natural water reduces its ability to sustain aquatic life. The COD test is therefore performed as routine in laboratories of water utilities and industrial companies.

6-20ml screw headspace GC vial belongs to autosampler vial; 6-20ml screw headspace GC vial was often used for Aijiren, and other autosamplers. It is easy to analysis sample element.6-20ml screw headspace GC vial is made of clear type1 class A or amber type 1 class B borosilicate glass. Aijiren produce 6-20ml screw headspace GC vial using foreign high-quality imported raw materials. It can high temperature resistance and corrosion resistance.

9 mm screw top vial, 32×11.6 mm, clear glass, high recovery, borosilicate glass
1.5ml vial with 30ul reservoir for sample concentration and injection, no transfer to micro insert

Aijiren, as a supplier of chromatography consumables, provides headspace vials and sealing plugs. Aijiren s headspace vials and caps are carefully designed to prevent sample contamination and ensure accurate analysis. They come in various sizes and glass types. Optional crimping or threaded vials.

PTFE/Silicone/PTFE septum provides excellent resistance to core rings
Wide range of autosamplers
Good quality control such as height, diameter, bottom, thickness, neck/thread, cleanliness, etc.
Consistent quality across batches

2 ml snap top autosampler borosilicate glass vials are a specific type of vials commonly used in analytical laboratories and automated sample handling systems. They are designed for convenient and secure sealing, as well as compatibility with autosamplers for efficient sample handling.

Bonded Caps & Septa effectively eliminates needle shedding and prevents septum shedding
The cover pad is integrally formed, ready to use
Pre-slit is good for needle push-through

The manual crimper is widely used for laboratory headspace sample vial crimping, designed for laboratory use with good chemical resistant surface coating. The crimper removes aluminum caps safely and quickly with a single grip.

Vials Rack for 1.5ml / 2ml Vials, Blue, 50 Holes

The picture is one of Aijiren’s production plants. It can be seen that each of Aijiren’s workshops has a large space, which can accommodate a large number of production machines and the storage of raw materials and finished products. The right side of the picture is the adhesive-free composite of Silicone and PTFE. The Septa raw materials are placed on the shelves.