High temperature resistant GC inlet port Septa for Gas Chromatography system

Type: One-piece magnetic threaded seal cap
Thread: 18mm diameter
Center hole: 8mm (standard) or closed top
Separator type:
・Blue PTFE/white silicone (SACA001)
・Red PTFE/white silicone (SACA002-II)
・White PTFE/blue silicone – SPME only (SACA003-1)
・Gray PTFE/red butyl (SACA004)
Cap: Metal magnetic base

This table summarizes the full range of AIJIREN screw-cap headspace vials—available in 6mL, 10mL, and 20mL capacities, clear or amber glass, and with flat and round bottom options. Equipped with Type 5 or Type 7 septa and aluminum cap assemblies, they ensure leak-proof sampling. Suitable for high-throughput GC/HPLC and autosamplers.

18mm Screw Top Headspace Vial optional capacity is 10ml 20ml, the specifications are: 22.5*46mm, 22.5*75.5mm, providing headspace vials in both colorless and brown colors. The 20ml GC analysis headspace vials series strictly controls the HPLC vials mouth to improve the sealing performance. The precision molding bottleneck improves the processing capacity of the autosampler.

These 20mm molded septa and grey butyl stoppers provide stable sealing performance for laboratory vials. Their 3mm thick structure ensures reliable needle penetration, low extractables and clean sample protection. Suitable for routine analysis, sample preparation and storage applications.

Headspace Vials Available from Aijiren Tech. Headspace vials are available in volumes from 6 mL to 20 mL in clear glass. Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

Headspace vials are laboratory vials used for headspace analysis and are characterized by high temperature and corrosion resistance.

Headspace vials are used in headspace gas chromatography processes. They are suitable for headspace analysis of volatile solids and gases.

The 10ml precision threaded headspace vial is used for the screw-top vial and magnetic screw cap of the CTC and TriPlus autosampler. It is convenient to use and does not require any additional tools such as cappers and decappers.

Aijiren’s headspace vials are available in 20ml and 10ml, and the glass color can also be clear or amber. The headspace vial is often used in gas chromatography, where the gas in the reagent is volatilized by heating for detection.

Capacity: 10ml
Temperature: -60—200℃
Material: Borosilicate glass
Color: amber
Specification: 22.5*46mm
Packing: 100 pcs/pack, inner packing shrink plastic box

SPME Vials, 18mm Screw Thread Vial
Cap: 18mm Magnetic Precision Screw Metal Caps, 8mm Centre Hole
Septa: White PTFE/Blue Transparent Silicone Septa

High-performance 10mL and 20mL 18mm screw thread headspace vials (ND18) with rounded bottom design, crafted from USP Type I borosilicate glass. Provides secure, pressure-resistant sealing without crimping tools, compatible with Agilent, CTC, and Shimadzu autosamplers.

Aijiren’s 20mL 18mm Screw Thread Headspace Vial is very popular. It is favored by our customers for its high quality and cheap price. Aijiren is a manufacturer of 20mL 18mm Screw Thread Headspace Vial, so we bring our customers to the factory price.Buy 20mL 18mm Screw Thread Headspace Vial,Choose Aijiren.

Aijiren Tech headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability. All Aijiren Tech headspace vials meet or exceed OEM instrument manufacturer’s specifications.Aijiren Tech vials are available in 6ml, 10ml, 20ml versions with Screw type.

20ml precision thread headspace vial, 75×22.5mm, clear glass, borosilicate glass, round bottom
18mm combination seal: magnetic univerisal screw cap, silver, centre hole, ptfe/silicone or ptfe/butyl septa

Aijiren Tech headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability. All Aijiren Tech headspace vials meet or exceed OEM instrument manufacturer’s specifications.Aijiren Tech vials are available in 6ml, 10ml, 20ml versions with Screw and Crimp type.

Headspace Vials and Closures from Aijiren. Aijiren Technologies headspace vials and closures are engineered to prevent sample contamination and ensure accurate analysis. They are available in a range of sizes and glass types. Choice of 10ml or 20ml vials; Bevelled top for maximum level of seal security.

Finally, the gas in the vial enters the gas phase detection. Top space gas analysis with the help of a headspace vial helps automate quality control or sample selection. Using modern instruments, through highly reproducible samples, the entire experiment can be prepared for analysis in an accurate manner.

Headspace vials and closures must form a tight seal for accurate analysis with reproducible results. Available in clear or amber Type I borosilicate glass with crimp or screw thread finishes. The vials are used to heat the sample until the concentration of the liquid and gas phases are in equilibrium. A sample is then taken from the gas phase (headspace) for analysis.

More convenient, consistent, and safer sealing process compared to crimping (better reproducibility). No risk of inaccurate or inconsistent crimping results. Due to thinner septa suitable for SPME as well as for Headspace. Often used on CTC Combi PAL and identically constructed autosamplers as well as on Perkin Elmer instruments.
Aijiren supply ND18 screw headspace vial in wholesale price, welcome to inquiry. You can also find Aijiren by those channel.

Suitable for 11mm 2ml Crimp Neck Vials & 20mm Headspace GC Vials
Caps Material: Aluminum
Use Together with PTFE/Silicone Septa or Rubber Stopper
Color: Metal Silver
Vial Septa & Rubber Stopper and Crimpers are also Provided

Transparent crimp top headspace vial with aluminum crimp cap and ptfe silicone septum
volume: 10ml or 20ml, diameter: 20mm neck diameter

The material of the headspace sample vials is low-extraction borosilicate glass, which is characterized by low expansion, high temperature resistance, high strength, high hardness, high light transmission and high chemical stability. Headspace vials are suitable for headspace analysis of volatile solids and gases. 20mm crimp headspace vial is widely used in Headspace and GC, GCMS application.

The material of Headspace Vials is low extractable Borosilicate glass with low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance and high chemical stability. Headspace Vials suitable for headspace analysis of volatile solids and gases.

Headspace vials are available in clear or amber glass with a round or flat base, with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

Suitable for: 18mm screw top headspace vials
Cap material: magnetic metal
Cap features: 8mm center hole
Color: Metallic Silver
Septa material: PTFE / silicone
Septa size: 17.5*1.5mm
Package: 100pcs/pack

Aijiren Tech crimp top headspace vials are available in a flat or round bottom style, with clear or amber glass. Headspace closures are available in pre-assembled caps with septums or can be ordered individually. Pressure release, seal with lining, and seal with magnetic lining are also optional.

The 20mm septum is made of PTFE/silicone fusion, which has excellent inertness and can be used for multiple injections. The thickness is 3mm, and PTFE is about 0.08mm. The cap of the clamp-top empty bottle is made of metal aluminum

Aijiren is a supplier of laboratory consumables, focusing on the production of 10mL 18mm Screw Thread Headspace Vial for GC. Aijiren has more than ten years of experience in making 10mL 18mm Screw Thread Headspace Vial and is a well-known brand among Chinese laboratory consumable suppliers. Aijiren strives to provide quality service to every customer.