China Lab sample filter membrane syringe filter Price

Syringe filtration is a crucial technique in laboratory settings, playing a vital role in sample preparation for various analytical methods.

Our syringe filters are made from high-purity polytetrafluoroethylene (PTFE) membrane for superior performance and durability. PTFE is an ideal material for HPLC applications with excellent chemical compatibility, low protein binding, and minimal analyte adsorption. This ensures sample integrity for accurate, reproducible results.

Among the many medium types of Syringe Filters produced by Aijiren, Polypropylene Syringe Filter is a special one. Because Polypropylene is often used to make the shell of Syringe Filter, there are fewer types of membranes made of Polypropylene. Aijiren finally decided to use this material to produce Syringe Filter after studying the production materials of many different manufacturers and the usage of different customers.

The PTFE Syringe Filter in the picture has an aperture of 0.22, an outer diameter of 25mm, and a purple color. Aijiren also offers many other colors of Syringe Filter, such as yellow, pink, blue, green, etc. Customers can choose according to their preferences . The Syringe Filter produced by Aijiren can be equipped with many different types of filter membranes, which can be selected according to the reagents that customers need to filter.

The MCE membrane filter provides researchers with the lowest combined filter. Due to their extremely low binding characteristics, these filters provide higher throughput than competing products and reduce filter replacement when filtering protein solutions.

In HPLC analysis, the particle size of the chromatographic column packing is small and easily blocked by contaminant particles. Therefore, samples and solvents must be pre-filtered to remove particulate contaminants and protect the instrument.

PTFE (polytetrafluoroethylene) performance: suitable for water system and various organic solvents, resistant to all solvents, low solubility. It has the characteristics of air permeability and water impermeability, large air flux, high particle retention rate, good temperature resistance, resistance to strong acids, alkalis, organic solvents and oxidants, resistance to aging, non-stickiness, non-flammability, non-toxicity, and biocompatibility. Its related products are widely used in chemical, pharmaceutical, environmental protection, electronics, food, energy and other fields

A syringe filter is a quick, convenient and reliable filter tool used routinely in the laboratory. Because they don’t need to change the membrane and filter cleaning, it’s eliminating the complex and time-consuming preparation.  

Aijiren Syringe Filter is a comprehensive range of non-sterile disposable syringe filters for reliable sample pre-treatment. Reproducible membrane quality and automated manufacturing processes ensure particles are removed from all samples, extending the life of analytical columns and minimizing injection port and valve damage. The Aijiren syringe filter is available in 0.22um and 0.45um porosity, 4, 13, 25 and 30mm diameters.

13 mm Syringe Filters: For sample volumes

The PTFE syringe filter is tritium-free and has a two-way membrane support and Luer lock inlet/outlet and a safe and suitable syringe. The membrane type and pore size are printed on each filter for easy identification. All Aijiren syringe filters are 100% integrity tested and comply with ISO 9002 standards. The sterilizing filter is sterilized with gamma rays. And detect no pyrogen, no cytotoxicity.

Aijiren’s Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings.

When using vents, these syringe filters can prevent moisture from passing through. Usable pH range: 1-14. PTFE can be applied to: filtering organic solvents with strong chemical corrosiveness, filtering strong acid solvents, filtering alkali solvents, compatible with gaseous samples, and can handle high-temperature liquids.

In order to filter the particles correctly, you need to find the right size filter. You should choose the diameter of the filter carefully. They usually have sizes of 13mm, 25mm and 30mm. Each of these has a different ability to hold particles. According to the sample size, you can choose the appropriate filter diameter. For example, a diameter of 13 mm can be used for 1-10 ml samples. Similarly, 25 mm PVDF syringe filters can be used for sample volumes of 10-100 ml. Their retention is less than 100 ml.

As an important tool for filtering reagents, the Nylon syringe filter plays a very important role, especially in chromatographic consumables. A slightly larger impurity particle in the reagent may cause clogging of the instrument.

PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing.

Nylon has excellent flow characteristics, extremely low extractable level and mechanical stability, and can provide the best combination of physical parameters to meet the most stringent analysis requirements of 13mm, 25mm and 33mm diameters. Nylon’s natural hydrophilicity, high protein binding capacity and high dirt adsorption capacity are natural advantages.

Membrane: HPLC-certified PVDF
Use with: Alcohols, weak acids, proteins, peptides and other biomolecules
Don¡¯t use with: ?Some strong acids, bases, esters, ethers or ketones.?
Sterilization: Syringe filters can be sterilized by autoclave at 125¡ã for 15 minutes.?
Applications: General biological filtration, filtration of samples for high protein recovery.?

The advantages of Syringe Filter: The low extractable membrane and shell ensure that no filter contaminants are added to your samples. Aijiren performs performance tests under actual HPLC conditions. The integrated 1mm borosilicate glass prefilter (30mm device) ensures higher confidence in samples with high solids content.

Aijiren Syringe Filters is a comprehensive range of non-sterile disposable syringe filters for reliable sample preparation. Reproducible membrane quality and automated manufacturing processes ensure particulates are removed from each and every sample, extending analytical column lifetime and minimising injection port or valve damage.

A syringe filter (or wheel filter) is a single-use, membrane-based device used for the removal of particulate impurities from small (≤ 100 mL) liquid samples. Selected based upon the desired end application, disposable syringe filters are commonly used in labs for fast and efficient filtering, material purification, or even sterilization.

 In HPLC analysis and IC analysis, syringe filters can be used to filter sample solutions, which is an important step in sample pretreatment.

Low protein binding rate: These filters have a low protein binding rate. When the sample is less bound, its fluidity increases, and it also has better diffusion properties. Samples purified with PES filters can produce better results by tolerating slight changes in their density-related properties.

These syringe filters feature a user-friendly design that allows for easy and efficient filtration. They are compatible with standard luer-lock syringes, providing a secure and leak-free connection. The nylon membrane has a small pore size, typically ranging from 0.2μm to 0.45μm, enabling efficient removal of contaminants while retaining the desired analytes. The filters provide high flow rates and low protein binding, making them suitable for a variety of sample types.

Aijiren¡¯s PP syringe filter uses a hydrophobic polypropylene membrane, which has stable physical and chemical properties, good compatibility, low protein adsorption, and is suitable for filtration of aqueous solutions and most solvents. Commonly used to filter biological samples, solvents, deionized water and reduce biological load, the hydrophobic PP filter membrane is particularly good for gas filtration. The product was sterilized by dry heat at 121¡ãC for 15 minutes.

The Aijiren Tech Syringe Filter is a comprehensive non-sterile disposable syringe filter for reliable sample preparation. Reproducible membrane quality and automated manufacturing processes ensure particles are removed from all samples, extending the life of analytical columns and minimizing injection port and valve damage.

Aijiren Tech’s syringe filters are a complete range of non-sterile disposable syringe filters for reliable sample preparation. Repeatable membrane quality and automated production processes ensure that particles are removed from each sample, extend the service life of the analytical column, and minimize damage to the inlet or valve.