100ml250ml 500ml Dopak sample bottle sealing PTFE, Rubber, EPDM, septum for Petroleum liquids

The 2ml crimp auto sample vial is easy to fill because it is a sample vial with a wide opening. Fits most autosamplers especially for Aijiren. The 2ml crimp autosampler vial supports a 11.6x32mm vial format. High quality 33 extended borosilicate transparent glass type 1, class A or 51A amber glass. Uniformly flat bottom to ensure safety with inserts. You can choose a 2ml crimp autosample vial with or without a tick mark.

These vials are manufactured with high precision and quality control standards to ensure consistent performance. They undergo rigorous processes to eliminate defects and ensure batch-to-batch uniformity. The use of high-quality materials and advanced manufacturing techniques guarantees reliable and reproducible results in HPLC analysis.

Reagent bottle, also called media bottle, 50 ml, clear glass, screw cap GL 32, including screw cap/glass pouring ring, PP material
The blue cap reagent bottle adheres to the brand’s consistent high-quality manufacturing requirements, and the internal structure of the glass is extremely stable, so it has excellent mechanical and chemical properties. Because of its low coefficient of thermal expansion, it can better withstand rapid thermal changes. It is a good choice to replace expensive imported reagent bottles.

Hydrophilic nylon membranes have extremely low levels of extractables and contain no wetting agents. They offer good chemical resistance and are ideal for aqueous and most organic samples. Filters are Triton-free and have a bidirectional membrane support and luer lock inlet/outlet for a secure fit to the syringe. Membrane type and pore size are printed on each filter for easy identification. All Cole-Parmer syringe filters are 100% integrity tested and manufactured in accordance with ISO 9002 standards. Sterile filters are sterilized by gamma radiation. They are certified nonpyrogenic, noncytotoxic, and are blister packed.

2ml crimp hplc vials vary depending on the filling volume. Distinguish between a standard 2ml crimp hplc vial and a micro vial with a shape that reduces the volume or outer volume. Alternatively, of course, you can use inserts to reduce the capacity in the vial and create ideal conditions for removing samples.

The 2ml crimp hplc vial with insert is larger than the 9mm screw sample vial and has a wider mouth. The 2ml crimp hplc vial features an opening about 40% wider than the standard opening vial. Large openings reduce the risk of autosampler needle bending during sampling.

Polypropylene Screw Micro Vials can be used in most standard gas and liquid chromatography autosamplers. These lightweight, economical vials are made of durable polypropylene with good chemical resistance. The conical interior ensures maximum recovery of contents without the hassle of removable inserts.

Hydrophobic PTFE (Polytetrafluoroethylene) syringe filters are suitable for gaseous and organic solutions, with excellent performance for high corrosive samples. It is possible for an extended sampling range using hydrophobic PTFE filters for wider chemical resistance to aggressive substances and outstanding temperature stability. A PTFE syringe filter is an ideal choice for filtering and de-gassing chromatography solvents.

The chromatographic direct range of 20mm crimped top-space sample vials and caps are available in 20ml amber and transparent colors, 10ml and 6ml with a variety of flat-bottom and round-bottom shapes, suitable for autosamplers of many brands on the market. Our 20mm crimp cap with silicone/PTFE Septa is compatible with all autosamplers.

FTU sample bottles are packed in corrugated trays with partitions. The transparent vial is certified by ISO and SGS. The short sample vial is characterized by small size, higher stability, and reduced dead volume above the sample, so it is very suitable for compound storage. The black phenolic screw cap is attached to the vial. The vials and caps can be autoclaved.

If the reagents you test are invaluable and the capacity of the 2ml vials is too large, you can use the Ajiren 8-425 2ml autosampler vial in different types of microinse inserts. There are three types of microinse inserts. 29* 5mm 150uL micro inserts, mandolin interior and polymer feet, 150uL conical bottom micro inserts and 250uL flat-bottom microinserts. All three micro inserts can be adapted to 8-425 2ml autosampler vials.

The 10ml precision threaded headspace vial is used for the screw-top vial and magnetic screw cap of the CTC and TriPlus autosampler. It is convenient to use and does not require any additional tools such as cappers and decappers.

Reagent bottle is a type of laboratory glassware used for storing and dispensing chemical reagents. It is designed to hold relatively small amounts of liquid reagents and is typically made of glass, although plastic reagent bottles are also available.
Reagent bottles have several distinctive features. They usually have a narrow neck and a wide base, which provides stability and prevents tipping. The neck of the bottle is often equipped with a screw cap or a ground glass stopper to provide a secure seal and prevent the evaporation or contamination of the reagent. The cap or stopper may also have a liner or seal to enhance the closure.

The 9mm Screw Closures produced by Aijiren have many advantages such as high quality, strong adaptability, resistance to cracking, high temperature resistance, chemical resistance, etc. Since 9mm Screw Closures have many different styles and materials, the demand for 9mm Screw Closures is very high. High and diversified options also allow customers multiple choices.

Autoclavable PP screw cap and pouring ring
PP pouring ring designed for drip-free operation
Clear scales and large marking area
These complete bottles are autoclavable and sterilizable
These bottles are highly mechanically durable and chemically resistant

Aijiren is a factory-type enterprise specializing in the production of Autosampler Vial. Aijiren has its own production line that can mass-produce and automate production. Aijiren¡¯s 9mm Autosampler Vial has always been the most popular and the highest-selling product. The flat brown is also a popular choice for customers.

Looking for reliable GL45 laboratory glass reagent bottle supplier? Explore our range of 50ml, 100ml, 500ml, and 1000ml bottles for your lab needs. Quality guaranteed!

Clear Glass Vial Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal.

Aijiren¡¯s PP syringe filter uses a hydrophobic polypropylene membrane, which has stable physical and chemical properties, good compatibility, low protein adsorption, and is suitable for filtration of aqueous solutions and most solvents. Commonly used to filter biological samples, solvents, deionized water and reduce biological load, the hydrophobic PP filter membrane is particularly good for gas filtration. The product was sterilized by dry heat at 121¡ãC for 15 minutes.

4ml wash vials for autosampler
with 13-425 screw caps and septum
Clear and amber borosilicone glass for choose

The blue cap reagent bottle produced by Aijiren, with graduations, with O-shaped anti-drip ring; low thermal expansion coefficient, can be repeatedly autoclaved; 100ml / 250ml / 500ml / 1L multiple specifications optional, chemical resistance, high temperature and high pressure , No dripping. Borosilicate 3.3 glass material, in line with USP EP first-class glass.