Lab Borosili3.3 Glass liquid chemical Duran reagent bottle with Scale 50ml

Reagent bottle, also called media bottle, 50 ml, clear glass, screw cap GL 32, including screw cap/glass pouring ring, PP material
The blue cap reagent bottle adheres to the brand’s consistent high-quality manufacturing requirements, and the internal structure of the glass is extremely stable, so it has excellent mechanical and chemical properties. Because of its low coefficient of thermal expansion, it can better withstand rapid thermal changes. It is a good choice to replace expensive imported reagent bottles.

Reagent bottles are made of borosilicate glass or soda lime glass with stoppers or caps to prevent spillage of contents or contamination from external environments. Reagent bottles are ideal for storing powders and liquids. Amber or red reagent bottles protect the photosensitive contents from UV, visible and infrared radiation.

With a large enough change in temperature, the neck of the bottle can actually crack if it shrinks too tight around the stopper. Additionally, if hot liquid is poured in the bottle, the liquid will form an air-tight seal between the stopper and bottle and as the liquid and steam in the bottle cool and shrink, the stopper will be pulled down into the bottle neck.? This is the same principle that makes the center of a canning jar lid pop down until the seal is released.

Constructed from borosilicate glass or soda-lime glass, reagent bottles feature stoppers or caps, which protect the contents from spilling or outside environmental contamination. Reagent bottles are excellent for storing powders and liquids.

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, borosilicate or related substances with special caps on top. They are intended to hold chemicals in liquid or powder form for laboratory use and are stored in cabinets or on shelves. Some reagent bottles are amber (photochemical), brown or red to protect photosensitive compounds from visible, ultraviolet and infrared radiation that may alter them; when the side of the bottle is marked to indicate the approximate (usually with a 10% error) amount of liquid for a given level in the container, these bottles are called “graduated “. A reagent bottle is a type of laboratory glassware.

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, plastic, borosilicate or related substances, and topped by special caps or stoppers. They are intended to contain chemicals in liquid or powder form for laboratories and stored in cabinets or on shelves.

Features of reagent bottle: permanent white enamel marking point, GL 45 thread, no lining, autoclaving (140¡ãC), borosilicate glass, polypropylene cover, technical parameters. The reagent bottle produced by Aijiren is chemically resistant, conforms to ISO and SGS standards, has a heat resistance of +500 ¡æ, and has good thermal shock performance. It is an ideal container for high-temperature substances and can be used for high-temperature sterilization.

Features:
1. It is made of borosilicate 3.3 glass, which has the properties of chemical resistance, heat resistance and impact resistance. The unique design of the pouring ring at the mouth of the bottle avoids dripping during use.
2. For the convenience of use, reagent bottles with a capacity of 100ml and above all adopt uniform and replaceable screw caps and pouring rings.
3. The bottle body, bottle cap and pouring ring can be sterilized by high temperature and high pressure.
4. Suitable for sample collection for various liquid particle size testing, containing high-clean reagents, standard materials, and standard samples
5. Threaded bottle cap with good sealing performance, which can effectively isolate external magazines, dust and moisture
6. The specifications are clearly marked and the volume scale is obvious