250ml Glass Reagent Bottle from Aijiren on Sale

Reagent bottle is a type of laboratory glassware used for storing and dispensing chemical reagents. It is designed to hold relatively small amounts of liquid reagents and is typically made of glass, although plastic reagent bottles are also available.
Reagent bottles have several distinctive features. They usually have a narrow neck and a wide base, which provides stability and prevents tipping. The neck of the bottle is often equipped with a screw cap or a ground glass stopper to provide a secure seal and prevent the evaporation or contamination of the reagent. The cap or stopper may also have a liner or seal to enhance the closure.

Measure laboratory media using the Aijiren? Reagent Borosilicate Glass Bottle with Cap. It conforms to ISO R1115 and DIN 168, is chemically resistant and can be repeatedly sterilized to 140¡ãC.

Borosil glass reagent bottles are chemically inert and stable. With plastic pouring rings, dripping is completely eliminated. The bottles, pouring rings and caps are autoclavable and sterilizable.
Temperature fluctuations up to 30 K, maximum working temperature +140°C. Polypropylene screw cap GL 45 blue

All Aijiren reagent bottles have a permanent white enamel scale for volume measurement; with a white identification box for marking or coding. Includes anti-drip sealing ring and standard blue polypropylene (GL45) sealing cap.

The glass media bottle is made of borosilicate glass or soda lime glass and equipped with a plug or cover to prevent the contents from overflowing or being polluted by the external environment. Reagent bottles are ideal for storing powders and liquids. Amber or red media bottles can protect photosensitive contents from ultraviolet, visible and infrared radiation.

Features of reagent bottle: permanent white enamel marking point, GL 45 thread, no lining, autoclaving (140¡ãC), borosilicate glass, polypropylene cover, technical parameters. The reagent bottle produced by Aijiren is chemically resistant, conforms to ISO and SGS standards, has a heat resistance of +500 ¡æ, and has good thermal shock performance. It is an ideal container for high-temperature substances and can be used for high-temperature sterilization.

Features:
1. It is made of borosilicate 3.3 glass, which has the properties of chemical resistance, heat resistance and impact resistance. The unique design of the pouring ring at the mouth of the bottle avoids dripping during use.
2. For the convenience of use, reagent bottles with a capacity of 100ml and above all adopt uniform and replaceable screw caps and pouring rings.
3. The bottle body, bottle cap and pouring ring can be sterilized by high temperature and high pressure.
4. Suitable for sample collection for various liquid particle size testing, containing high-clean reagents, standard materials, and standard samples
5. Threaded bottle cap with good sealing performance, which can effectively isolate external magazines, dust and moisture
6. The specifications are clearly marked and the volume scale is obvious

Aijiren reagent bottles provide unrivalled uniform wall thickness distribution.
Improved mechanical stability and resistance to temperature changes
Prevents the stress that occurs in the glass and the possibility of rupture during heating and cooling
Advantages: Improve employee safety, extend the service life of experimental glassware, and protect valuable substances.

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, plastic, borosilicate or related substances, and topped by special caps or stoppers. They are intended to contain chemicals in liquid or powder form for laboratories and stored in cabinets or on shelves.

Reagent bottles that have been used in a laboratory or otherwise used to store chemicals should not be used for storing food or drinks. The bottles in our kits are always brand new but they may contain a white residue from the process of grinding the neck and stopper so they should always be washed before use.

Bottles and screw caps can be autoclaved / sterilized. Made from borosilicate glass helps prevent changes in ph levels and maintain content purity. Non-slip coating allows for greater ease and stability when handling wet or dry. 45mm white polypropylene unlined screw cap comes attached to bottle to help maintain cleanliness. Pvc-based plastisol coats exterior of bottle retaining contents if bottle is accidentally broken.

Reagent Bottle is suitable for general laboratory use, including mixing, storing or transporting culture media, chemicals or solvents. White enamel paint with chemical resistance, enhanced nicks and spots, can be autoclaved, with GL 45 threaded cap, each bottle has a replaceable clean (natural) non-drip polypropylene casting ring, from USP compliance Manufacture of type I and ASTM E438 type I, and type A requirements of 33 kinds of expansion type low extractable borosilicate glass

Reagent bottle is a type of laboratory glassware used for storing and dispensing chemical reagents. Reagents are substances that are used in chemical reactions or laboratory analysis to produce a chemical change or to detect, measure, or test other substances. Reagent bottles are specifically designed to safely contain and preserve these reagents.
Reagent bottles are typically made of glass, although plastic versions are also available for certain applications. Glass reagent bottles are preferred because they are chemically inert, meaning they do not react with most chemicals and do not contaminate the reagents being stored.

Aijiren™ Reagent Bottles, also known as Media Bottles, are manufactured from high quality borosilicate 3.3 glass with a GL45 threaded cap. With their superior chemical resistance, these bottles are ideal for storing reagents, culture media, biological fluids, and a variety of other aqueous and non-aqueous solutions.

The Aijiren reagent bottles are designed and manufactured in China.
Made of premium Borosilicate glass, these bottles offer maximum possible chemical resistance with minimal thermal expansion, making them the best choice for laboratory applications.
PP Cap and Pouring ring autoclavable to 140°C.