Caps and stoppers for reagent bottles should be selected carefully, as their material or lining may interact negatively with the contents of the bottle.
Measure laboratory media using the Aijiren? Reagent Borosilicate Glass Bottle with Cap. It conforms to ISO R1115 and DIN 168, is chemically resistant and can be repeatedly sterilized to 140¡ãC.
With a large enough change in temperature, the neck of the bottle can actually crack if it shrinks too tight around the stopper. Additionally, if hot liquid is poured in the bottle, the liquid will form an air-tight seal between the stopper and bottle and as the liquid and steam in the bottle cool and shrink, the stopper will be pulled down into the bottle neck.? This is the same principle that makes the center of a canning jar lid pop down until the seal is released.
Features of reagent bottle: permanent white enamel marking point, GL 45 thread, no lining, autoclaving (140¡ãC), borosilicate glass, polypropylene cover, technical parameters. The reagent bottle produced by Aijiren is chemically resistant, conforms to ISO and SGS standards, has a heat resistance of +500 ¡æ, and has good thermal shock performance. It is an ideal container for high-temperature substances and can be used for high-temperature sterilization.
Reagent bottle also called media bottle, widely used in laboratory
Material: Borosilicate Glass
Cap type: GL32 Screw Cap
All hybex bottles have permanent, white enamel graduations for volume measurement and a white identification box for marking or coding. All hybex media bottles include a drip-free sealing ring as well as a standard blue polypropylene (GL45) sealing cap. Bottles are also available with green, purple, white and yellow caps, or in an assortment pack containing two of each color.
A low coefficient of thermal expansion (3.3), provides temperature resistance that is far superior to that of standard lab glass (or soda lime glass). Aijiren glass can withstand temperatures from -70 to 500°C, permitting repeated use in freezers, microwaves, autoclaves and dry heat sterilization chambers.
The blue cap reagent bottle produced by Aijiren, with graduations, with O-shaped anti-drip ring; low thermal expansion coefficient, can be repeatedly autoclaved; 100ml / 250ml / 500ml / 1L multiple specifications optional, chemical resistance, high temperature and high pressure , No dripping. Borosilicate 3.3 glass material, in line with USP EP first-class glass.
Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, borosilicate or related substances with special caps on top. They are intended to hold chemicals in liquid or powder form for laboratory use and are stored in cabinets or on shelves. Some reagent bottles are amber (photochemical), brown or red to protect photosensitive compounds from visible, ultraviolet and infrared radiation that may alter them; when the side of the bottle is marked to indicate the approximate (usually with a 10% error) amount of liquid for a given level in the container, these bottles are called “graduated “. A reagent bottle is a type of laboratory glassware.
All Aijiren reagent bottles have a permanent white enamel scale for volume measurement; with a white identification box for marking or coding. Includes anti-drip sealing ring and standard blue polypropylene (GL45) sealing cap.
The reagent bottle, also called the culture medium bottle or graduated bottle, is a container made of glass, borosilicate or related substances and covered with a special cap or stopper. They are intended to be used in the laboratory for chemicals in liquid or powder form and are stored in cabinets or shelves.
1. It is made of borosilicate 3.3 glass, which has the properties of chemical resistance, heat resistance and impact resistance. The unique design of the pouring ring at the mouth of the bottle avoids dripping during use.
2. For the convenience of use, reagent bottles with a capacity of 100ml and above all adopt uniform and replaceable screw caps and pouring rings.
3. The bottle body, bottle cap and pouring ring can be sterilized by high temperature and high pressure.
4. Suitable for sample collection for various liquid particle size testing, containing high-clean reagents, standard materials, and standard samples
5. Threaded bottle cap with good sealing performance, which can effectively isolate external magazines, dust and moisture
6. The specifications are clearly marked and the volume scale is obvious