Laboratory Bottle PTFE Silicone white/Blue Rubber Septa Cap

Starburst center design polyethylene SepCap makes it easy to penetrate syringe needles
Convenient vial kit includes the same number of vials and caps
Polyspring inserts are automatically adjusted to provide cushions for needle contact
Microsampling vials allow maximum sample extraction without the need for separate inserts

Bottles and screw caps can be autoclaved / sterilized. Made from borosilicate glass helps prevent changes in ph levels and maintain content purity. Non-slip coating allows for greater ease and stability when handling wet or dry. 45mm white polypropylene unlined screw cap comes attached to bottle to help maintain cleanliness. Pvc-based plastisol coats exterior of bottle retaining contents if bottle is accidentally broken.

2ml Crimp HPLC Vial requires a relatively inexpensive painted aluminum crimp cap. When properly assembled, it will become the best seal for long-term storage. 2ml Crimp HPLC Vial with Cap needs to be used with crimper and cap opener. The crimp cap cannot be reused, it can only be used once.

All Aijiren bottles have permanent white enamel scales for volume measurement; white identification boxes for marking or coding.
All Aijiren media bottles include non-drip sealing rings and standard blue polypropylene (GL45) sealing caps.

How to choose a precise syringe filter: Aijiren disposable syringe filters come in many types. There are mainly two series, one is hydrophilic and the other is hydrophobic series. The syringe filter has two diameters: 13mm and 25mm. The pore size of the filter membrane is 0.22, 0.45um. Membrane materials include: RC, nylon, PVDF, PTFE, etc. It is important for customers to choose the right membrane.

Aijiren 13-425 glass vials with screw cap are customized products based on your experimental requirements for vial types, writing areas, logos and other individual parameters. Aijiren 13-425 glass vials with screw cap is fully compatible with SHIMADZU autosamplers. Compared to crimp top vials, 13-425 glass vial with screw cap can easily tighten the lid without the help of a tool. Polypropylene threaded cap with PTFE septa, can form a good seal on the vial, improve work efficiency.

2 ml clear crimp neck vial is a type of vial commonly used in laboratory settings for storing and handling liquid samples or reagents.Clean the vials thoroughly before use to avoid contamination, and use a crimping tool to apply the cap or closure securely.

Aijiren Storage vial is an ideal device for general laboratory use and storage of diverse samples due to excellent sealability and chemical tolerance.
Besides, chemically inert caps are a good choice for most chromatography and storage applications. Top grade PTFE or Silicone septa are adopted to ensure cleaning production and consistent quality of sample vials.
The flat bottom profile can keep stable standing, and reduced sprinkle. Borosilicate glass is used as main material to enhance corrosion and temperature resistance. Superior quality with a favorable price is worthy of your order and more and cheaper.

A crimping tool is required to seal caps. Several types of hand crimpers are available including the adjustable precision crimpers that Chromatographic Specialties offers.

It is wider than the ordinary Cap, and the Aluminum Cap has good sealing performance. The 5.5mm Center Hole is also convenient for the automatic injection needle in and out. It works very well with Hand Crimper.

4 mL HPLC vial refers to a specific type of vial used in High-Performance Liquid Chromatography (HPLC) systems. HPLC vials are small containers made of glass or sometimes plastic, designed to hold samples that will be analyzed using HPLC techniques.
In the case of a 4 mL HPLC vial, it means that the vial has a maximum capacity of 4 milliliters (4 mL) of liquid sample. These vials typically have a narrow opening at the top, which can be sealed with a cap or septum to prevent sample evaporation or contamination.

Aijiren finds the right size filter in order to ensure that customers can filter the particles correctly. It is recommended that you choose the diameter of the filter carefully. Aijiren produces usually sizes of 13 mm and 25 mm. Each of them has a different ability to hold particles. According to the sample size, the appropriate filter diameter can be selected. For example, a diameter of 13 mm can be used for samples of 1-10 ml. Similarly, 25 mm PVDF syringe filters can be used for sample volumes of 10-100 ml. Their retention is less than 100 ml.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

A syringe filter is a quick, convenient and reliable filter tool used routinely in the laboratory. Because they don’t need to change the membrane and filter cleaning, it’s eliminating the complex and time-consuming preparation.  

The compatibility or chemical resistance of 20mm Grey Butyl Septa with samples and solvents can be consulted by Aijiren’s salesperson. Butyl’s tightness makes 20mm Grey Butyl Septa suitable for multiple injections or storage. The 20mm Grey Butyl Septa has a thickness of 3mm, which has good sealing properties and facilitates the puncture of the autosampler needle. It is not thick enough to affect the puncture. PTFE is the most inert resistance of the septum, and Aijiren’s bonding process makes Septa not easy to fall off.

Micro volume vial inserts, when used in conjunction wit […]

24mm Silicone/PTFE Septa is matched with 24mm screw neck cap, suitable for 24mm screw sample storage vial. Aijiren has an exclusive production technology that can compound PTFE and Silicone without adding any adhesives, so Aijiren’s Septa is soft and not easily deformed.

During Aijiren’s production process, more production is used as a backup. Autosampler Vial with part of the margin is packaged in a carton for packaging. Aijiren’s factory can provide Autosampler Vial, Headspace Vial, COD Test Tube, Syirnge Filter and other different products. Production, so Aijiren has great advantages in exporting products. These advantages have created Aijiren and made Aijiren a well-known supplier of chromatography consumables in China.

Aijiren Tech headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability. All Aijiren Tech headspace vials meet or exceed OEM instrument manufacturer’s specifications.Aijiren Tech vials are available in 6ml, 10ml, 20ml versions with Screw type.

Aijiren’s 9mm Screw Cap is made of high-quality PP material, and the color can be customized according to customer needs. You can also choose whether to have a center hole. If you need to perform automatic sampling, it is recommended to use a Cap with a center hole to facilitate automatic injection needles sampling.