1.5ml Snap Top Autosampler Vials for PERKINELMER

The 4ml 13mm Screw Thread Vials often feature clear graduated markings on the side, allowing for accurate measurement and dispensing of samples. These graduations provide researchers with a visual reference for precise volume control, minimizing errors in sample preparation and analysis.

The manufacturer’s lot number for each component of this product is tracked until all procedures are completed at which time a final lot number is assigned and documented. A randomly selected collection of vials from each completed lot are submitted to an independent validation laboratory for quality control purposes to confirm that the TOC vials comply with the quality specification. The vial, closure and dust cover undergo comply with stringent quality standards and specifications.

“1.3ml Clear 9mm Screw Autosampler Vials” specifies the volume, transparency, opening size, and closure mechanism of the vials.
These vials are commonly used in laboratory settings for the storage and analysis of liquid samples using autosampler systems.
Refers to a specific type of laboratory vial commonly used in analytical chemistry.
9mm Screw Autosampler Vials are a type of laboratory vial commonly used in analytical chemistry for sample storage and analysis.
Laboratory high receovery V bottom clear autosampler vial conform to USP Type 1 and ASTM E 438 Type 1, Class A requirements.

Aijiren’s syringe filter with nylon membrane is compatible with a variety of solvents and is very suitable for rapid filtration of most aqueous and organic solutions. Therefore, when the mixture of the sample aqueous solution and the organic solvent passes through the membrane, the fine droplets of the extraction solvent gather and separate from the sample aqueous solution. The nilong syringe filter produced by Aijiren is environmentally friendly and has no centrifugal effect. By filtering the receptor phase, it can provide a higher sample purification rate.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

Hand Decrimper, also called hand decapper, is used to open crimp caps. Simple and economical manual decapper for two different cap sizes (ND11 and ND20). Suitable for aluminum and bimetal caps, not for magnetic caps.

Using these bottles for sample storage can reduce ion leaching while ensuring that the sample maintains a consistent pH during its lifetime. Thermo Scientific™ National™ and Thermo Scientific™ Chromacol™ sample storage screw-top bottles are made of high-quality 33 expanded borosilicate transparent (type 1, type A) glass or 51A amber (type 1, type B) glass. The storage bottle has a capacity range of 40 mL.

The aijiren chromatography sample vial is made of borosilicate glass and meets ASTM TYPE I ClassA and USP TYPE I standards.
There are four types: colorless and amber vial, handwriting area and no handwriting area.

The vial caps of the storage series are made of the main quality polypropylene, which combines innovation with time-saving convenience. The chemically inert vial cap produced by this method truly combines the septum and the plastic cap at the molecular level, which can avoid excessive evaporation and keep the sample vial properly sealed.

The syringe filter has the following characteristics:
1. Convenient, readily available, easy to operate, economical and practical.
2. Reliable bacteria retention efficiency ensures the filtering and sterilization effect.
3. Larger effective membrane filtration area: 1.09cm2.
4. High flow rate, high throughput, dead volume no more than 10¦Ìl.
5. Very low protein adsorption.
6. Pass HPLC dissolution test.

Amber Glass 8-425 is often used to contain light-sensitive samples. The high-quality borosilicate hydrochloric acid glass used by Aijiren ensures that 8-425 Glass Vial has strong high temperature and low temperature resistance, strong corrosion resistance, and can guarantee maximum damage A chemical reaction occurs with the sample. Aijiren provides logo customization service, you can customize your exclusive logo in the Write-on Area area.

11mm Natural Snap-top PE Caps, 6mm Centre Hole
White PTFE/Red Silicone Septa 11*1mm
for 11mm Glass Snap Top Vials

Aijiren Storage Vial Stores your samples in these vials to eliminate leaching of ions while maintaining a consistent pH for the life of your sample. Storage vials range from 20mL to 60 mL.

The 9mm 2ml Screw Autosampler Vial for HPLC is a vital component for precise and reliable liquid chromatography analysis. With a capacity of 2ml, these vials provide ample space for sample storage.

Aijiren Tech crimp top headspace vials are available in a flat or round bottom style, with clear or amber glass. Headspace closures are available in pre-assembled caps with septums or can be ordered individually. Pressure release, seal with lining, and seal with magnetic lining are also optional.

A 20mm GC vial decapper/vial crimper is a versatile tool used in pharmaceutical and laboratory settings for removing caps or crimping aluminum seals on 20mm GC (Gas Chromatography) vials. It combines the functionality of a decapper and a vial crimper into a single device.The combined decapper and vial crimper tool is commonly used in pharmaceutical compounding, research laboratorie

There are two types of 24mm Screw neck Cap, center hole and closed-top. The cap with center hole can be more convenient for sample injection. The closed top can store samples and has better sealing. It can have its own for 20ml-60ml. Storage range and capacity.

PES (Polyethersulfone ) syringe filter is natural hydrophilic which makes is an ideal choice (highly recommended) for aqueous solutions and alcohols. It’s not necessary to treat the filter membrane surface with wetting agents.

Aijiren has always insisted on using high-quality glass, because only the quality of the glass is high enough to be compatible with more samples and more convenient for customers to experiment. Therefore, Aijiren decided on borosilicate glass after various comparisons. This glass is not only resistant to high temperature and corrosion It is also inert and not easily broken, which is very suitable for large-capacity 60ml sample storage vial.

Snap Vials are manufactured from Type 1 borosilicate glass(Class A, 33 expansion borosilicate glass), available in clear or amber, or from Polypropylene. Snap Vials accept both an Aluminum Snap Seal as well as a Polyethylene Snap Cap. Excellent for short term storage. Deactivation, MS Certification is also available.

Cap is manufactured in the most advanced molding equipment using high-purity pure polypropylene. PP complies with US FDA 21 CFR material. Used to store PCR reagents, enzymes and other diagnostic reagents, as well as biochemical reagents or samples. The HDPE screw cover is leak-proof. Can be used at low temperatures. Amber Storagr vials can be used for light-sensitive samples.

I250, I300 Vial Inserts
250ul, 300ul Volumn
Flat Bottom
Clear Glass