The Crimp top Vial provided by Aijiren is suitable for Water’s Autosampler. The diameter of the Crimp top vial is 40% wider than the ordinary Vial, which is convenient for the in and out of the automatic injection needle. Aluminum Cap has good airtightness, non-volatile samples, and can be stored for a long time, making it your best choice for storing samples.
Aijiren focus on improving the safety and integrity of our samples. Aijiren provide innovative 9mm thread caps and 9mm 2ml Hplc Screw Vials to ensure consistent productivity in all separation processes. These vials are the best choice for the latest autosampler. Standard open screw vials are made of borosilicate glass with a maximum filling volume of 2ml.
The Aijiren sample vials are highly sealed to effectively avoid sample evaporation. Vials and corresponding 11 mm aluminum caps can be easily and quickly combined with jaw capping tools. Vials can withstand heat and pressure and can also be used for chemical reactions. It can be used as an anhydrous and anaerobic reactive vial, especially for white open caps and thick PTFE/silicon septum vials.
There are three types of 2ml HPLC Vials produced by Aijiren, Screw, Snap and Crimp Top. These three types of Vials can be used for autosamplers, but different bottlenecks are used with different types of machines, but these three types of vials The maximum capacity is 2ml, and you can choose vias with label area on the bottle.
Caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate and is great for nail polish remover and higher concentration acids & alkalis. Good for non-oil products filled at room temperature. Because this lining system is paperless, your samples will not be contaminated with fiber or paper particles from the closure. Available in Phenolic caps.
Approximately 40% larger than a normal small neck The increase of the target area makes sample preparation easier Large diameter is specially designed for automatic samplers such as Waters The large-mouth design reduces the probability of bending and damage of the sample needle during the needle sampling process
The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.
Amber Borosilicate Glass ND9mm Screw Neck Vial 11.6*32mm With Writing Spot 9mm Blue Short Screw PP Cap with 6mm Centre Hole Pre-slit / non-slit PTFE Silicone Septa Septa Size: 9*1mm
1.5/2ml autosampler vial refers to a type of sample container commonly used in analytical chemistry and laboratory settings. The vial has a total volume capacity of 1.5 to 2 milliliters (ml). Autosampler vials are designed to be compatible with automated liquid handling systems, such as autosamplers, which are used to inject samples into analytical instruments for analysis. The vial typically consists of a cylindrical glass or plastic body with a narrow opening at the top. It is sealed with a cap or septum to prevent sample contamination and evaporation.
8-425 2ml Autosampler Vials from Aijiren is 12*32mm,It is 40% wider than the ordinary vial opening, thus ensuring that the syringe of the autosampler can pierce the bottle smoothly without errors. 8-425 2ml autosampler vials neck Suitable for Shimadzu autosampler and other rotating or robotic arm samplers.
Aijiren is a supplier of 2ml 9mm Screw HPLC Vials. Our factory specializes in the production of vials for chromatography. We use good raw materials to make vials and sell them at a cheap price while ensuring quality. The 2ml 9mm Screw HPLC Vials provided by Aijiren can be added with a writing area, which is convenient for customers to mark samples during experiments and to distinguish samples. Aijiren’s 2ml 9mm Screw HPLC Vials also accept logo customization. If the customer needs, we can print the customer’s brand logo on the vial. We provide customized services to facilitate customer needs. If you need 2ml 9mm Screw HPLC Vials or customized service, please contact us.
As HPLC autosampler vial manufacturer, Aijiren supply 2ml clear crimp top hplc autosampelr vial in wholesale price. The price of 2ml clear crimp top hplc autosampler vial is the same to Amber autosampler vial. Before you buy it, Aijiren can supply free sample to test. Aijirne is a global supplier of analytical field and lab supplies with high quality, good service and favorable price. About 2ml clear crimp top hplc autosampler vail and septa , cap, you can ask Aijiren business manager. Welcome to inquiry.
Aijiren’s 10-425 screw vial is made of borosilicate hydrochloric acid glass, which has the characteristics of high temperature resistance and corrosion resistance, 10-425 screw vial is very compatible with the automatic sampler with a mechanical arm.
Use Aijiren 11 mm Glass Crimp Top Vials with aluminum crimp seal closures. These high-quality 11 mm glass vials are 2 mL, 12 x 32 mm and fit most brands of autosamplers. Made of superior quality 33 expansion borosilicate clear (Type 1, Class A), they meet all requirements of US, EU, JPN Pharmacopia. Choose from Aijiren brands.
2ml Autosampler HPLC Screw glass vials are small containers used in high-performance liquid chromatography (HPLC) analysis. They are designed specifically for use in autosamplers, which are instruments used to inject samples into the HPLC system automatically. These vials are made of high-quality glass that is resistant to the solvents and chemicals commonly used in HPLC analysis. The vials have a capacity of 5 milliliters, which is the maximum volume of sample they can hold. The vials are typically clear or amber in color, with clear vials allowing for visual inspection of the sample, while amber vials provide protection against light-sensitive samples.
PTFE (polytetrafluoroethylene) silicon vials, also known as PTFE-lined silicon vials, are specialized containers commonly used in pharmaceutical and laboratory settings. These vials are designed to provide a high level of chemical resistance and inertness, making them suitable for storing and transporting sensitive or reactive substances.TFE silicon vials are commonly used for storing and transporting pharmaceutical drugs, particularly those that are sensitive to interactions with container materials.
4ml 13-425 hplc vial with screw cap is belong to HPLC autosampler vials. The classification of HPLC autosampler vials is generally done based on the diameter of the vial body, vial height, and thread finish. Clear glass and amber glass present similar inertness. 4ml 13-425 hplc vial with screw cap is compatible to SHIMADZU instrument. Autosampler needle pierces through the cap during injection and withdraws the required amounts of analyte from the sample vial.
crimp vial is compatible with all 2mL vial autosamplers, 2mL, 11.6x32mm.11X1mm Teflon/silicone septa, 11mm crimp top sample vials and micro-inner tubes, vapor/liquid vials
Save time in sample preprocessing and reduce the risk of contamination with the Ajiren 9-425 screw sample vial convenience kit. Each kit includes 100 glass sample vials and 100 threaded thread caps with septum. Two reusable compartment trays keep matching supplies together while protecting vials and closures.
11mm Gc Snap Top Caps With Ptfe Silicone Septa For 2ml Snap Vials , Find Complete Details about 11mm Gc Snap Top Caps With Ptfe Silicone Septa For 2ml Snap Vials,Auto Sampler Vial,Hplc Vial,Snap Vial from Supplier or Manufacturer-Jiangyin Allpro Polymer Technology Co., Ltd.
All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.
Snap Top 2ml HPLC Vials can accommodate 250uL Micro-inserts,The specifications of Micro-insert are 29*5.7mm, 31*5.7mm, and 31*6mm. You can choose Micro-insert according to your needs. This is more helpful for HPLC analysis of precious samples, which can save samples without causing waste.
Padded 2ml snap top Autosampler vials are widely used in experiments. The pads are made from PTFE and high quality silicone rubber or ultra-high purity silicone as raw materials. Make sure the gasket is non-toxic. Using an adhesive-free adhesive process, PTFE film and silicone rubber or silicone adhere and maintain a composite post-interval Teflon layer contact reagent with good properties, good chemical inertity of the two materials.
Thread: 9mm short thread Type: Closed top or 6mm center hole Key models:
SC9196: Red cap + white PTFE/red silicone
SC9198: Yellow cap + white PTFE/red silicone
SGSC9291: Metal-reinforced blue cap
SC9291-C: Clear cap + red PTFE/white silicone
If the reagents you test are invaluable and the capacity of the 2ml vials is too large, you can use the Ajiren 8-425 2ml autosampler vial in different types of microinse inserts. There are three types of microinse inserts. 29* 5mm 150uL micro inserts, mandolin interior and polymer feet, 150uL conical bottom micro inserts and 250uL flat-bottom microinserts. All three micro inserts can be adapted to 8-425 2ml autosampler vials.
Features: 1) 8mm screw vials can be used with all common autosamplers 2) Standard narrow neck design for GC and HPLC 3) 8mm wide opening that is easy to drill holes
If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.
1.5ml/2ml Screw neck HPLC clear vials are a type of vial used in high-performance liquid chromatography (HPLC) applications. HPLC clear vials are made from clear glass, typically borosilicate glass, which offers excellent visibility and chemical resistance. The clear glass allows for easy visual inspection of the sample and facilitates accurate volume measurements. These vials are specifically designed to meet the requirements of HPLC applications, which often involve sensitive and precise analyses. Screw neck HPLC clear vials are a type of vial used in high-performance liquid chromatography (HPLC) applications.
