Micro Insert suit for 2ml HPLC Vials

The crimp vial produced by Aijiren has a standard 11.6x32mm shape and is compatible with 11mm aluminum sealing caps. The Aluminum Cap is 11mm in diameter and has a 5.5mm center hole, which is convenient for sampling with automatic injection needles. In addition, the Septa matched with crimp vial can also be pre-slit to facilitate the automatic injection needle to pierce the septa.

IV250 vial insert
Conical Bottom
31*5.7mm
suit for 9mm, 10mm, 11mm vials

And the nylon membrane syringe filter produced by Aijiren can be used for alkaline blotting and fixation. If fixing methods such as baking and ultraviolet light are used, higher nucleic acid detection sensitivity can be obtained. Since the nylon membrane is a hydrophilic membrane, it does not need to be immersed in a solution such as ethanol or methanol for activation. The nylon syringe filter produced by Aijiren is only for professionals to use for scientific research, not for food.

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap, sample vial has Transparent, amber, transparent with scale writing, and amber with scale writing are available for selection, suitable for various models of autosamplers such as Aijiren, Waters, Varian and Shimadzu.

HPLC autosampler vials  are generally categorized by vial diameter, vial height, and thread finish. Clear glass and amber glass have similar inert properties. Amber glass is used to protect sensitive samples from UV light. Markings on the vials provide sample identification information.

Aijiren not only produces Vial for HPLC and GC, but also Sample Storage Vials for storing samples. Aijiren’s Sample Storage Vials are divided into amber and clear vials. Amber vial can protect the sample from ultraviolet rays.

The Aijiren 15x45mm vial has a 13-425 GPI thread that can hold up to 4ml of samples. Use a 13 x 425 cap with a septum when using it as a sample vial, or a diffusion cap for a cleaning vial. Sealed screw seals allow these vials to also be used as storage vials.

The Head Crimper is suitable for use with standard laboratory vials and aluminum cap seals. The 20mm Manual Flip-Top Crimper is designed for crimping flip-top caps.

Aijiren is a factory specializing in the production of Autosampler Vials. The factory has a professional production building for the production of Autosampler Vials. Aijiren has produced Autosampler Vials for 20 years and sold them to more than 200 countries and regions around the world, which shows Aijiren Rich experience in the production of Autosampler Vials, and a wide brand effect.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial.

Due to their artificially reduced cap height screw caps don’t have a standardized thread design. Therefore, it is recommendable only to use vials and closures from one source of supply, in order to ensure a harmonious and tight matching of both components

The automatic vial is made of high quality raw materials. It has high temperature resistance and corrosion resistance. The septum of the autosample vials is made of high quality materials to ensure proper functioning and is widely used in multiple injection or longer injection cycle designs as well as gas and liquid chromatographs.

The Sample Cell Vial produced by Aijiren is made of high-quality borosilicate hydrochloric acid glass, which can not change shape at high temperature, and is inert and does not chemically react with reagents. The Black PP Screw Cap is also made of high temperature resistant material, and has good sealing performance, which can effectively ensure that the reagent will not spill.

Micro Insert with Mandrel Interior & Polymer Feet
Volume: 150ul, 250ul
Suit for 2ml screw neck vials and 2ml crimp neck vials

Use Aijiren?11 mm Glass Crimp Top Vials with aluminum crimp seal closures. These high-quality 11 mm glass vials are 2 mL, 12 x 32 mm and fit most brands of autosamplers. Made of superior quality 33 expansion borosilicate clear (Type 1, Class A), they meet all requirements of US, EU, JPN Pharmacopia. Choose from Aijiren brands.

Glass autosampler vial, 4ml, 15mm x 45mm, with 13-425 screw cap.
Ideal for general laboratory use and sample storage.
Chemically inert caps suitable for most chromatography and storage applications
The finest PTFE/silicon septum used for cleanliness

Aijiren’s 9mm Screw Thread Vial has a specification of 11.6*32mm. You can choose 5.0type and 7.0type, and you can also choose clear and amber colors, or you can choose with or without label area. Aijiren provides customized services. Customers can customize logo printing.

13 mm 0.22 um syringe filters come in various sizes, pore sizes, and materials to suit different applications. It is important to select the appropriate filter based on the type of sample, the desired filtration efficiency, and the compatibility of the filter material with the solvent or solution being filtered.Syringe filters can remove particulate matter, debris, aggregates, colloids, bacteria, and other contaminants that may interfere with the analysis.

Headspace Vials and Closures from Aijiren. Aijiren Technologies headspace vials and closures are engineered to prevent sample contamination and ensure accurate analysis. They are available in a range of sizes and glass types. Choice of crimp or screw top vials; Bevelled top for maximum level of seal security.

High-quality silica gel guarantees good sealing performance, PTFE guarantees the corrosion resistance of the product, 2ml, 11.6x32mm sample vial, 9x1mm Teflon/silicone septa, 9mm polypropylene screw cap.

The 1.5ml HPLC Autosampler Sample Vial offers a precise volume capacity, allowing for accurate sample measurements and analysis. The vial’s capacity is specifically designed to accommodate the exact sample volume required for HPLC analysis, ensuring minimal waste and optimal use of samples.

When selecting a vial septum, septum compatibility with the sample and solvent or chemical resistance are the main considerations. Except for poor sealing, others are not suitable for multiple injections or storage. For layered septa, such as PTFE/silicone, chemicals with sample/solvent, so the chemical resistance of silicone should be considered when using these septa.

4ml wash vials for autosampler
with 13-425 screw caps and septum
Clear and amber borosilicone glass for choose