Laboratory Bottle PTFE silicon 2 ml 11 mm Crimp vials

9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic are samplers
2ml 12*32mm clear borosilicate glass vial,with a write-in patch; high quality polypropylene caps, ptfe / silicone septa can be pre-slit to easy needle penetration

Aijiren’s hottest 8-425 2ml Screw HPLC Vial with Cap have been introduced. Aijiren uses high-quality raw materials to make 8-425 2ml Screw Vial with Cap. Customer satisfaction and praise have made Aijiren one of the largest laboratory consumables producers in southern China. First, Aijiren will stick original intention to ensure the quality of 8-425 2ml vial.

4ml 13-425 hplc vial with screw cap is belong to HPLC autosampler vials. The classification of HPLC autosampler vials is generally done based on the diameter of the vial body, vial height, and thread finish. Clear glass and amber glass present similar inertness. 4ml 13-425 hplc vial with screw cap is compatible to SHIMADZU instrument. Autosampler needle pierces through the cap during injection and withdraws the required amounts of analyte from the sample vial.

The function of crimping top sample vials, Strict quality assurance provides dimensional consistency between batches, Optional ceramic write points with filling marks, Certified and fully compatible with autosampler.

All Aijiren HPLC vials are ideal for autosamplers and offer excellent chemical compatibility and ultra-cleanliness. 2ml Crimp HPLC Vial with Cap are the most commonly used gas sampling vials on the market today. Aijiren 2ml Crimp HPLC Vials are manufactured from Type 1 borosilicate glass, available in clear or amber. Excellent for long term storage. 2ml volume sample vial especially suitable for laboratory use. At the same time, some 2ml Crimp HPLC Vial bottoms are designed at the bottom, so they have a flat bottom and are compatible with automatic sampling devices.

2ml Clear/Amber Hplc borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis.orosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.

Snap seal vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Aijiren is committed to ensuring the safety and integrity of the analyzed samples. Aijiren provides an innovative 10mm 2ml Hplc screw Vials to ensure that all experimental data during the separation process are consistent. 10-425 Screw Vials are the best choice for the latest autosamplers. The standard opening vial is made of borosilicate glass and has a maximum filling volume of 2ml.

The thread design of the 8-425 threaded sample vialcan make the septum achieve extremely strong re-tightness, so this sample vial can also be used as a storage vial, and it can also be used for autosampler. This design sample vial is mostly suitable for Shimadzu Hitachi and other Japanese enterprise instruments.

Capacity: 1.5/2ml
Temperature: -60—200℃
Material: bottle (domestic borosilicate); gasket (Teflon/silicone); lid (polypropylene)
Color: bottle (transparent/amber), cap (blue)

The non-pre-slit septas help to reduce carryover from vial to vial because the resealing characteristics of the septum act as a squeegee to wipe solution from the outside of the needle. Typically, a non-slit septum exhibits resealing capabilities for a limited number of needle punctures but for long-term storage in the vial, using a new non-punctured septum is best practice.

The 9mm screw HPLC autosampler sample vial is made of colorless borosilicate glass or amber 1 B grade borosilicate glass, which is a high-quality raw material. Excellent high temperature and corrosion resistance. Aijiren has strict control over the production environment. Aijiren 9mm screw HPLC autosampler sample vials have won the trust of customers.

2ml / 1.5ml glass crimp vials with crimp seals for hplc autosampler
Crimp the caps to the vials with the hand crimper
100pcs per pack, aluminum caps with ptfe silicone septa, 100pcs per pack

The 2ml snap HPLC vial is made of type 1 borosilicate glass. Compared to 9mm screw vials, this 2ml snap hplc vial opening is a wider opening. Therefore, the 2ml snap top HPLC vial is easy to fill and increases the target area of the autosampler needle. This means that 2ml snap-top HPLC vials can protect needles.

The 2ml snap-top HPLC vial size is 11.6x32mm and is compatible with most autosamplers such as Aijiren. 2ml HPLC vials are available in amber and transparent colors. The bottom of the vial is flat. It is convenient to put. Aijiren offers 2ml snap-top HPLC vials and pads at wholesale prices.

1.5ml Autosampler HPLC Screw glass vials are small containers used in high-performance liquid chromatography (HPLC) analysis. They are designed specifically for use in autosamplers, which are instruments used to inject samples into the HPLC system automatically.
These vials are made of high-quality glass that is resistant to the solvents and chemicals commonly used in HPLC analysis. The vials have a capacity of 1.5 milliliters, which is the maximum volume of sample they can hold. The vials are typically clear or amber in color, with clear vials allowing for visual inspection of the sample, while amber vials provide protection against light-sensitive samples.

Too much or too little resistance to the needle can damage the septum, damage the re-sealing, the needle may be clogged by the core ring of the septum material, or the autosampler may be damaged. The Used Aijiren silicone rubber/PTFE septum is designed to give moderate resistance to the autosampler needle during the injection process, so it penetrates correctly into the vial without damaging the septum or injection needle.

Aijiren’s chromatography bottle has a wide-mouth crimp cap that provides a larger target area and improves the accuracy of the autosampler needle. Can be made of clear and amber glass. The label can be written area, can help the experimenter to distinguish the sample type.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

All Aijiren 11mm Crimp HPLC Vials are ideal for autosamplers and offer excellent chemical compatibility and ultra-cleanlines.
The 11mm Crimp Vial provided by Aijiren is well sealed and suitable for storing samples. It needs to be used with Decrimper and Crimper.

4ml borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis. Borosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.When working with water samples in HPLC, borosilicate glass vials are a suitable choice due to their resistance to water and other polar solvents.

2ml lab autosampler vial is a small container typically used in laboratory settings to store and transport samples for analysis.
Autosampler vials are designed to be compatible with automatic sampling systems or instruments known as autosamplers.
The capacity of a 2ml autosampler vial refers to its volume, and it can hold up to 2 milliliters (2 ml) of liquid or sample.
These vials are commonly made of glass or high-quality plastic materials such as polypropylene or polymethylpentene (PMP).
The choice of material depends on the specific application and compatibility requirements.

Aijiren 2ml crimp top certified vials for autosamplers are made of Type 33 and Type 51 COE borosilicate glass with low metal content to prevent sample instability or leaching. By choosing our bottle caps and septa, you can provide the best sealing solution for your samples.

2ml amber snap autosampler vial is equipped with PP snap cap. Snap cap can be easy to take away. 2ml amber snap autosampler vial can be matched with various color of caps. 2ml amber snap autosampler vial caps bring more convenience to your inventory management.
2ml amber snap autosampler vial for lab chromatography analysis is also equipped with PTFE/Silicone Septa. This 2ml amber snap vial septa can total seal the vial. Aijiren has continued to improve septa to actively reduce leaching, chipping, blocking, pushing, stiffening, and adsorption issues.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Glass vials are available in 2 ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

Neck Type: Screw, Snap / Crimp
Neck Diameter: 8-425, 9mm, 10-425, 11mm
Color: Clear / Amber
Graduated: with or without
Material: Borosilicate Glass

Brand: Aijiren
Mouthful capacity: 2.0ml
Material: made of grade 1 hydrolyzed glass
Color: brown
Whether OEM processing: Yes
Packing: 100 pcs/box, packed in PP plastic pallet box

2 ml borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis.Borosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.When working with water samples in HPLC, borosilicate glass vials are a suitable choice due to their resistance to water and other polar solvents.

2ml Autosampler HPLC Screw glass vials are small containers used in high-performance liquid chromatography (HPLC) analysis. They are designed specifically for use in autosamplers, which are instruments used to inject samples into the HPLC system automatically.
These vials are made of high-quality glass that is resistant to the solvents and chemicals commonly used in HPLC analysis. The vials have a capacity of 5 milliliters, which is the maximum volume of sample they can hold. The vials are typically clear or amber in color, with clear vials allowing for visual inspection of the sample, while amber vials provide protection against light-sensitive samples.

2ml 9mm sample vial with screw cap is easy to seal. You can seal the screw cap, easily, without any tools. 2ml 9mm sample vial with screw cap’s size is 22.5x46mm. Choose the 2ml sample vial with cap for your PERKIN ELMER autosampler.