1.5ml/2ml 11mm Snap autosampler Borosilicate Glass vial for Chromatography Analytical

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

2ml lab autosampler vial is a small container typically used in laboratory settings to store and transport samples for analysis.
Autosampler vials are designed to be compatible with automatic sampling systems or instruments known as autosamplers.
The capacity of a 2ml autosampler vial refers to its volume, and it can hold up to 2 milliliters (2 ml) of liquid or sample.
These vials are commonly made of glass or high-quality plastic materials such as polypropylene or polymethylpentene (PMP).
The choice of material depends on the specific application and compatibility requirements.

11mm Snap Top Closures are made of PP. The translucent Cap design allows users to see the fixed card slot. The inside of the Snap Cap has 4 protrusions for fixing in the lateral groove of the Vial Neck.

Aijiren is a supplier of Autosampler Vial. Aijiren has been in this industry for more than 10 years. Aijiren’s Vials are of good quality and affordable. And it is suitable for Autosampler of Waters. It can bring a lot of help to the daily experiment of the laboratory.

The 9mm screw HPLC autosampler sample vial is made of colorless borosilicate glass or amber 1 B grade borosilicate glass, which is a high-quality raw material. Excellent high temperature and corrosion resistance. Aijiren has strict control over the production environment. Aijiren 9mm screw HPLC autosampler sample vials have won the trust of customers.

2mL Amber Glass Screw Top Autosampler Vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. When choosing a 2mL Amber Glass Screw Top Autosampler Vials, the product material is of paramount importance.

These caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. Great for everything from liquids, to soaps, to macro-invertebrates.

HPLC vials are specially designed containers used to hold samples for injection into an HPLC instrument for analysis. These vials are made of high-quality materials such as borosilicate glass or plastic that are chemically inert and have minimal interaction with the sample.
HPLC vials are specially designed containers used to hold samples for injection into an HPLC instrument for analysis. These vials are made of high-quality materials such as borosilicate glass or plastic that are chemically inert and have minimal interaction with the sample.

Features: 32*11.6mm vial; 11*1mm Teflon/silicone septa; 11mm white open PP cover. It can be used on various autosamplers.

2ml / 1.5ml glass crimp vials with crimp seals for hplc autosampler
Crimp the caps to the vials with the hand crimper
100pcs per pack, aluminum caps with ptfe silicone septa, 100pcs per pack

Aijiren 2ml 11mm Snap Ring HPLC Vials has a standard scale and writing area for easy filling and identification. 2ml 11mm Sanp Ring HPLC vial can be matched with most autosamplers on the market, such as Aijiren, Thermo Fisher, Shimadzu and other well-known brands.

Chromatography autosampler vials are widely used in chromatography, chemistry, medical and other fields. Autosampler vials are generally made of hydrolytic glass or borosilicate, with various specifications. Different vial mouth designs meet different actual needs.

2ml screw autosampler vial refers to a specific type of vial used in laboratories for the storage and analysis of samples. It is designed to be compatible with autosamplers, which are automated instruments used for sample handling and injection into analytical instruments such as gas chromatographs (GC) and liquid chromatographs (LC).
The “2ml” refers to the vial’s nominal volume, which is 2 milliliters. This volume indicates the maximum capacity of the vial. The vial typically has clear glass or sometimes amber glass construction, allowing for visibility of the sample contents. The vial is cylindrical in shape with a screw thread on the outer surface of the neck.

Aijiren 2ml crimp top certified vials for autosamplers are made of Type 33 and Type 51 COE borosilicate glass with low metal content to prevent sample instability or leaching. By choosing our bottle caps and septa, you can provide the best sealing solution for your samples.

Snap Top 2ml HPLC Vials can accommodate 250uL Micro-inserts,The specifications of Micro-insert are 29*5.7mm, 31*5.7mm, and 31*6mm. You can choose Micro-insert according to your needs. This is more helpful for HPLC analysis of precious samples, which can save samples without causing waste.

Aijiren’s 9mm hplc vials are very suitable for Autosampler, especially Aijiren’s machines, because Aijiren’s 9mm hplc vials have a long neck to facilitate the grasping of instruments, and the bottom is flat and easy to place in the sampling area, and the accuracy of the thread is guaranteed Improved the sealing performance of 9mm hplc vials. In addition, Aijiren’s Cap and Septa have types that are convenient for Autosampler to puncture. Cap has a center hole, and Septa is very convenient for puncture.

Although most laboratories have switched to 9 mm screw thread vials for a wider opening while still being autosampler compatible, some labs use 8-425 vials for storing solvents. The standard opening 8-425 vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.

The 2ml HPLC PP Vial and Cap provided by Aijiren is usually 9mm in diameter, because the 9mm HPLC Vial can match most HPLC Autosamplers on the market. The specification of the 2ml HPLC PP vial is 12x32mm, the opening is increased by 40%, and the standard capacity is 1.5ml. The Cap of the 2ml hplc pp vial is also made of PP. There are two types of open top and closed top. Many colors are available for customers to choose.

Borosilicate glass is a type of glass that is known for its high resistance to heat and thermal shock. It is composed primarily of silica and boron oxide, which give it its unique properties.
Borosilicate glass has a low coefficient of thermal expansion, meaning it does not expand or contract significantly when exposed to changes in temperature. This makes it highly resistant to thermal stress and allows it to withstand rapid temperature changes without breaking.
Overall, borosilicate glass is valued for its exceptional thermal properties, chemical resistance, and optical clarity. Its versatility and durability have made it a preferred material in various industries, particularly in laboratory settings and for specialized glassware applications.

Padded 2ml snap top Autosampler vials are widely used in experiments. The pads are made from PTFE and high quality silicone rubber or ultra-high purity silicone as raw materials. Make sure the gasket is non-toxic. Using an adhesive-free adhesive process, PTFE film and silicone rubber or silicone adhere and maintain a composite post-interval Teflon layer contact reagent with good properties, good chemical inertity of the two materials.

4ml borosilicate glass vials are commonly used in high-performance liquid chromatography (HPLC) for sample storage and analysis. Borosilicate glass is preferred in HPLC because it offers excellent chemical resistance and thermal stability, making it suitable for handling a wide range of solvents and temperature conditions.When working with water samples in HPLC, borosilicate glass vials are a suitable choice due to their resistance to water and other polar solvents.

The crimp top provide the tightest seal, reducing the possibility of sample volatilization. The 12X32mm crimp vial and aluminum cap are the most economical choice, and it is also very convenient to use with the crimp tool.

Aijiren focus on improving the safety and integrity of our samples. Aijiren provide innovative 9mm thread caps and 9mm 2ml Hplc Screw Vials to ensure consistent productivity in all separation processes. These vials are the best choice for the latest autosampler. Standard open screw vials are made of borosilicate glass with a maximum filling volume of 2ml.

The Aijiren Crimp top sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

9mm screw autosampler vial is widely used in laboratory chromatography analysis. Aijiren as one of largest chromatography consumable supplier, supplies 9mm screw HPLC vial in wholesale price. This 9mm screw vial package can reduce screw vial mouth touch to prevent contamination of sample. At the same time, the package box can be used as a vial rock, it is save the cost. Welcome to inquiry us about chromatography consumable.