Thread Chromatography vial with 9mm Ptfe Silicone Pre-slit Septa

Vial micro insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro Inserts allow for maximum sample recovery and easier sample removal when combined with hplc autosampler vials.

Autosampler vials are available in a variety of sizes, with 2 mL vials being the most common size. During the injection process, the autosampler needle pierces the cap and extracts the desired amount of analyte from the vial. There are different types of vials for chromatography applications.

Aijiren 13-425 glass vials with screw cap are customized products based on your experimental requirements for vial types, writing areas, logos and other individual parameters. Aijiren 13-425 glass vials with screw cap is fully compatible with SHIMADZU autosamplers. Compared to crimp top vials, 13-425 glass vial with screw cap can easily tighten the lid without the help of a tool. Polypropylene threaded cap with PTFE septa, can form a good seal on the vial, improve work efficiency.

Crimp closures N11 are also universally suitable with regard to autosampler compatibility, however, they are not as safe and convenient in their closing technique as the screw closures N 9 (9mm) 2ml vials and closures.

The Aijiren sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw-capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

Choose from these chemically inert borosilicate glass vials, which are of high quality and suitable for most chromatographic applications. In certain applications, Aijiren? 11mm plastic crimp/bayonet vials provide an economical choice for glass. Borosilicate glass is chemically inert and suitable for most chromatographic applications. When the content of inorganic ions must be kept to an absolute minimum, borosilicate glass Snap Vial can be used.

The transparent glass threaded sample bottle is 2mL, 12x32mm, and has an advanced sample bottle sealing system. The screw vial can prevent the septum from being pressed in, and can provide a stop point for the bottle cap to prevent over-tightening or over-tightening, and it can provide the best and consistent seal every time.

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial.

High recovery vials offer precision vials made from low expansion borosilicate glass and designed with a unique interior bottom, solid glass vial of a Microliter-Vial with inner cone, allowing for maximum retrieval of contents by a syringe.  

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

HPLC autosampler vials  are generally categorized by vial diameter, vial height, and thread finish. Clear glass and amber glass have similar inert properties. Amber glass is used to protect sensitive samples from UV light. Markings on the vials provide sample identification information. Autosampler vials can be used to inject samples from an autosampler.

The 9mm screw cap is made from high-quality material, providing excellent durability and chemical resistance. Its precise threading allows for easy and efficient sealing, ensuring a reliable closure for HPLC vials. The septa, made of a specialized material, offers optimal inertness and compatibility with a wide range of samples, ensuring accurate and reproducible results in HPLC analysis.

Achieve faster workflow and greater convenience with our 2mL glass autosampler vials featuring a permanently printed volume scale.
The clear and accurate markings (0.5, 1.0, 1.5mL) allow instant visual sample assessment, reducing measurement time and improving analytical precision.

IV250 vial insert
Conical Bottom
31*5.7mm
suit for 9mm, 10mm, 11mm vials

Screw cap vials are a practical packaging solution for sample-size health, beauty, and pharmaceutical products. Glass screw cap vials are impermeable and don’t undergo chemical leaching, so your products stay pure. Uses for Screw Cap Vials. Use glass screw cap vials to package sample products or as full-size product packaging options.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling
13-425 screw thread caps, septa, and vials are designed for specific use with the Shimadzu and Waters WISP 48-Position Autosampler

The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial. The silicone rubber / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. These septa perform even when using a wide range of needles: fine, blunt or even dull. Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

4ml 13-425 HPLC vial with cap is used for chromatography system. In the experimental system, the automatic sample system has the high-tech innovation ability, can improve the productivity of the chemical laboratory, and achieve excellent results in efficiency, safety and replicability. Therefore, 4ml 13-425 HPLC vial is also of great concern.

Aijiren 2ml 11mm Snap Ring HPLC Vial is made of transparent type A type 1 or amber type B type 1 type B borosilicate glass. Amber glass can effectively block ultraviolet rays and protect sensitive samples from the volatilization caused by ultraviolet rays. Aijiren 2ml 11mm Snap Ring HPLC Vial has a standard scale and writing area for easy filling and identification.

Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Amber glass vials are available in 2ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.

Standard 1.5mL/2.0mL 9mm short thread autosampler vials (12x32mm) crafted from USP Type I borosilicate glass. Designed with a wide opening for easy sample filing, fully compatible with major brand LC/GC autosamplers.

Polypropylene Screw Cap with Septa – Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal and direct puncture-access to samples with a syringe needle.

All Aijiren 11mm Crimp HPLC Vials are ideal for autosamplers and offer excellent chemical compatibility and ultra-cleanlines.
The 11mm Crimp Vial provided by Aijiren is well sealed and suitable for storing samples. It needs to be used with Decrimper and Crimper.